- 您现在的位置：买卖IC网 > PDF目录18742 > MAX2016ETI+ (Maxim Integrated)IC DETECT/CNTRL LOG 28-TQFN PDF资料下载
参数资料
| 型号： | MAX2016ETI+ |
| 厂商： | Maxim Integrated |
| 文件页数： | 10/20页 |
| 文件大小： | 0K |
| 描述： | IC DETECT/CNTRL LOG 28-TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 60 |
| 频率： | 30kHz ~ 2.5GHz |
| RF 型： | 手机，GSM，EDGE，CDMA |
| 输入范围： | -70dBm ~ 10dBm |
| 精确度： | ±1dB |
| 电源电压： | 2.7 V ~ 5.25 V |
| 电流 - 电源： | 16mA |
| 包装： | 管件 |
| 封装/外壳： | 28-WFQFN 裸露焊盘 |
| 产品目录页面： | 1422 (CN2011-ZH PDF) |
LF-to-2.5GHz Dual Logarithmic Detector/
Controller for Power, Gain, and VSWR Measurements
Pin Description
PIN
1, 28
2, 9, 12, 20
3, 4
5, 17
6
7
8
10
11
13, 14
15
16
18, 19
21, 22
23
24
25
26
27
EP
NAME
FA1, FA2
V CC
RFINA+, RFINA-
GND
COUTH
CSETH
COR
SETD
OUTD
FV2, FV1
CSETL
COUTL
RFINB-, RFINB+
FB1, FB2
OUTB
SETB
REF
SETA
OUTA
GND
FUNCTION
External Capacitor Input. Connecting a capacitor between FA1 and FA2 sets the highpass cutoff
frequency corner for detector A (see the Input Highpass Filter section).
Supply Voltage. Bypass with capacitors as specified in the Typical Application Circuit . Place
capacitors as close to each V CC as possible (see the Power-Supply Connections section).
Differential RF Inputs for Detector A. Requires external DC-blocking capacitors.
Ground. Connect to the PCB ground plane.
High-Comparator Output
Threshold Input on High Comparator
Comparator OR Logic Output. Output of COUTH ORed with COUTL.
Set-Point Input for Gain Detector
DC Output Voltage Representing P RFINA - P RFINB . This output provides a DC voltage
proportional to the difference of the input RF powers on RFINA and RFINB.
Video-Filter Capacitor Inputs for OUTD
Threshold Set Input on Low Comparator
Low-Comparator Output
Differential RF Inputs for Detector B. Requires external DC-blocking capacitors.
External Capacitor Input. Connecting a capacitor between FB1 and FB2 sets the highpass cutoff
frequency corner for detector B (see the Input Highpass Filter section).
Detector B Output. This output provides a voltage proportional to the log of the input power on
differential inputs RFINB+ and RFINB- (RFINB).
Set-Point Input for Detector B
2V Reference Output
Set-Point Input for Detector A
Detector A Output. This output provides a voltage proportional to the log of the input power on
differential inputs RFINA+ and RFINA- (RFINA).
Exposed Paddle. EP must connect to the PCB ground plane.
Detailed Description
The MAX2016 dual logarithmic amplifier is designed for
a multitude of applications including dual-channel RF
power measurements, AGC control, gain/loss detection,
and VSWR monitoring. This device measures RF signals
ranging from low frequency to 2.5GHz, and operates
from a single 2.7V to 5.25V (using series resistor, R6)
power supply. As with its single-channel counterpart
(MAX2015), the MAX2016 provides unparalleled perfor-
mance with a high 80dB dynamic range at 100MHz and
exceptional accuracy over the extended temperature
and supply voltage ranges.
The MAX2016 uses a pair of logarithmic amplifiers to
detect and compare the power levels of two RF input
signals. The device subtracts one power level from the
other to provide a DC output voltage that is proportional
to the power difference (gain). The MAX2016 can also
measure the return loss/VSWR of an RF signal by moni-
toring the incident and reflected power levels associat-
ed with any given load.
A window detector is easily implemented by using the
on-chip comparators, OR gate, and 2V reference. This
combination of circuitry provides an automatic indica-
tion of when the measured gain is outside a program-
mable range. Alarm monitoring can thus be imple-
mented for detecting high-VSWR states (such as open
or shorted loads).
RF Inputs (RFINA and RFINB)
The MAX2016 has two differential RF inputs. The input
to detector A (RFINA) uses the two input ports RFINA+
and RFINA-, and the input to detector B (RFINB) uses
the two input ports RFINB+ and RFINB-.
10
______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| MPI-400-20 | XFRMR 10V 40A 400VA |
| MPI-400-16 | XFRMR 8V 50A 400VA |
| MAX2015EUA+ | IC DETECT/CNTRL LOG 8-UMAX |
| MPI-400-12 | XFRMR 6V 66.6A 400VA |
| ZIC2410QN48T | IC RF TXRX ZIGBEE 2.4GHZ 48GFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX2016ETI+ | 功能描述:射频检测器 LF-2.5GHz Dual Log Detector/Controller RoHS:否 制造商:Skyworks Solutions, Inc. 配置: 频率范围:650 MHz to 3 GHz 最大二极管电容: 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:SC-88 封装:Reel |
| MAX2016ETI+D | 制造商:Maxim Integrated Products 功能描述:DUAL LOGARITHMIC DETECTOR/CNTRLR 28TQFN EP - Rail/Tube |
| MAX2016ETI+T | 功能描述:射频检测器 LF-2.5GHz Dual Log Detector/Controller RoHS:否 制造商:Skyworks Solutions, Inc. 配置: 频率范围:650 MHz to 3 GHz 最大二极管电容: 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:SC-88 封装:Reel |
| MAX2016ETI+TD | 制造商:Maxim Integrated Products 功能描述:DUAL LOGARITHMIC DETECTOR/CNTRLR TQFN EP - Tape and Reel |
| MAX2016ETI-T | 功能描述:射频检测器 LF-2.5GHz Dual Log Detector/Controller RoHS:否 制造商:Skyworks Solutions, Inc. 配置: 频率范围:650 MHz to 3 GHz 最大二极管电容: 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:SC-88 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。