- 您现在的位置：买卖IC网 > PDF目录18825 > MAX2047ETJ+ (Maxim Integrated)IC MULT HI GAIN VECTOR 32-TQFN PDF资料下载
参数资料
| 型号： | MAX2047ETJ+ |
| 厂商： | Maxim Integrated |
| 文件页数： | 17/21页 |
| 文件大小： | 0K |
| 描述： | IC MULT HI GAIN VECTOR 32-TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 60 |
| 功能： | 高增益矢量倍频器 |
| 频率： | 790MHz ~ 1.005GHz |
| RF 型： | 手机，DCS，GSM，PCS，UMTS |
| 次要属性： | 15dBm 输入 IP3 |
| 封装/外壳： | 32-WFQFN 裸露焊盘 |
| 包装： | 管件 |
High-Gain Vector Multipliers
Pin Description
PIN
1
2
3
4
5
6
7
8
9
NAME
VI1
VI2
VQ1
VQ2
II1
II2
IQ1
IQ2
REFOUT
FUNCTION
Noninverting in-phase voltage-control input. Requires common-mode input voltage (2.5V typ).
Inverting in-phase voltage-control input. Requires common-mode input voltage (2.5V typ).
Noninverting quadrature voltage-control input. Requires common-mode input voltage (2.5V typ).
Inverting quadrature voltage-control input. Requires common-mode input voltage (2.5V typ).
Noninverting in-phase current-control input. This pin can only sink current. It cannot source current.
Inverting in-phase current-control input. This pin can only sink current. It cannot source current.
Noninverting quadrature current-control input. This pin can only sink current. It cannot source current.
Inverting quadrature current-control input. This pin can only sink current. It cannot source current.
2.5V Reference Output. Integrated reference voltage provides a 2.5V output for single-ended voltage-
control applications. For single-ended operation, connect REFOUT to the inverting voltage inputs (VI2,
VQ2).
10, 11, 14,
15, 16, 19,
20, 21,
23 – 27, 30,
31, 32
12
13
17, 18
22
28
29
Exposed
Pad
GND
RFOUT1
RFOUT2
V CC
RBIAS
RFIN1
RFIN2
—
Ground
Noninverting RF Output
Inverting RF Output
Supply Voltage
Bias Setting Resistor. Connect a 280 ? ( ± 1%) resistor from this pin to ground to set the bias current for
the IC.
Noninverting RF Input
Inverting RF Input
Exposed Pad. Exposed pad on the bottom of the IC should be soldered to the ground plane for proper
heat dissipation and RF grounding.
Detailed Description
The MAX2045/MAX2046/MAX2047 provide vector
adjustment through the differential I/Q amplifiers. Each
part is optimized for separate frequency ranges:
MAX2045 for f IN = 2040MHz to 2240MHz, MAX2046 for
f IN = 1740MHz to 2060MHz, and MAX2047 for f IN =
790MHz to 1005MHz. All three devices can be inter-
faced using current- and/or voltage-mode DACs.
The MAX2045/MAX2046/MAX2047 accept differential
RF inputs, which are internally phase shifted 90
degrees to produce differential I/Q signals. The phase
and magnitude of each signal can then be adjusted
using the voltage- and/or current-control inputs.
Figure 1 shows a typical operating circuit when using
both current- and voltage-mode DACs. When using
only one of the two, leave the unused I/Q inputs open.
RF Ports
The RF input and output ports require external matching
for optimal performance. See Figures 1 and 2 for appro-
priate component values. The output ports require
external biasing. In Figures 1 and 2, the outputs are
biased through the balun (T2). The RF input ports can
be driven differentially or single ended (Figures 1, 2)
using a balun. The matching values for the MAX2045/
MAX2046 were set to be the same during characteriza-
tion. An optimized set of values can be found in the
MAX2045/MAX2046/MAX2047 Evaluation Kit data
sheet.
I/Q Inputs
The control amplifiers convert a voltage, current, or
voltage and current input to a predistorted voltage that
controls the multipliers. The I/Q voltage-mode inputs
can be operated differentially (Figure 1) or single
ended (Figure 2). A 2.5V reference is provided on-chip
for single-ended operation.
______________________________________________________________________________________
17
相关PDF资料 |
PDF描述 |
|---|---|
| T620122004DN | SCR PHASE CTRL MOD 1200V 200A |
| VWO85-08IO1 | MODULE AC CTLR 3PH 800V V2-PACK |
| T620103004DN | SCR PHASE CTRL MOD 1000V 300A |
| MAX2010ETI+ | IC RF PREDISTORT ADJ 28-TQFN |
| MAX2009ETI+ | IC RF PREDISTORT ADJ 28-TQFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX2047ETJ+ | 功能描述:特殊用途放大器 High-Gain Vector Multiplier RoHS:否 制造商:Texas Instruments 通道数量:Single 共模抑制比（最小值）: 输入补偿电压: 工作电源电压:3 V to 5.5 V 电源电流:5 mA 最大功率耗散: 最大工作温度:+ 70 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:QFN-20 封装:Reel |
| MAX2047ETJ+T | 功能描述:特殊用途放大器 High-Gain Vector Multiplier RoHS:否 制造商:Texas Instruments 通道数量:Single 共模抑制比（最小值）: 输入补偿电压: 工作电源电压:3 V to 5.5 V 电源电流:5 mA 最大功率耗散: 最大工作温度:+ 70 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:QFN-20 封装:Reel |
| MAX2047ETJ-T | 功能描述:特殊用途放大器 High-Gain Vector Multiplier RoHS:否 制造商:Texas Instruments 通道数量:Single 共模抑制比（最小值）: 输入补偿电压: 工作电源电压:3 V to 5.5 V 电源电流:5 mA 最大功率耗散: 最大工作温度:+ 70 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:QFN-20 封装:Reel |
| MAX2047EVKIT | 功能描述:射频开发工具 RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V |
| MAX2048ETP+ | 功能描述:上下转换器 1.6-3.9GHz Up/Down Conversion Mixer RoHS:否 制造商:Texas Instruments 产品:Down Converters 射频:52 MHz to 78 MHz 中频:300 MHz LO频率: 功率增益: P1dB: 工作电源电压:1.8 V, 3.3 V 工作电源电流:120 mA 最大功率耗散:1 W 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PQFP-128 |
发布紧急采购，3分钟左右您将得到回复。