- 您现在的位置：买卖IC网 > PDF目录18755 > MAX2130EUA+ (Maxim Integrated)IC AMPLIFIER LN B/B 2OUT 8-UMAX PDF资料下载
参数资料
| 型号： | MAX2130EUA+ |
| 厂商： | Maxim Integrated |
| 文件页数： | 6/8页 |
| 文件大小： | 0K |
| 描述： | IC AMPLIFIER LN B/B 2OUT 8-UMAX |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 50 |
| 系列： | * |
| 频率： | 44MHz ~ 878MHz |
| P1dB： | 2.7dBm（1.9mW） |
| 增益： | 15dB |
| 噪音数据： | 2.8dB |
| RF 型： | DVB |
| 电源电压： | 4.75 V ~ 5.25 V |
| 电流 - 电源： | 49mA |
| 测试频率： | 500MHz |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽）裸露焊盘 |
| 包装： | 托盘 |
Broadband, Two-Output, Low-Noise
Amplifier for TV Tuner Applications
Pin Description
PIN
1
2
3
4, 6, 7, EP
5
8
NAME
V CC
IN
BIAS
GND
OUT2
OUT1
FUNCTION
Supply Voltage Input. Bypass with a 1000pF capacitor in parallel with a 47pF capacitor as close to
the pin as possible. (See Typical Application Circuit .)
Broadband Input to Low-Noise Amplifier and Loop-Out Amplifier. Internally matched to 75 Ω .
Requires 0.1 μ F DC-blocking capacitor. (See Typical Application Circuit .)
Bias-Setting Resistor Connection. Connect a resistor, R BIAS , from BIAS to GND to set the linearity
and supply current of the LNA and the loop-out amplifier.
Ground. Connect to ground plane with a low-inductance connection. Solder exposed paddle evenly
to the board groundplane.
Output of Loop-Out Amplifier. Requires a 0.1 μ F DC-blocking capacitor. (See Typical Application
Circuit. )
Open-Collector Output of Low-Noise Amplifier. Requires a pullup inductor to V CC , as well as a 0.1 μ F
DC-blocking capacitor. (See Typical Application Circuit .)
Detailed Description
The MAX2130 is a broadband, high-gain, low-distortion
low-noise amplifier (LNA) with two outputs intended for
operation over the 44MHz to 878MHz frequency range.
The device operates from a +5V supply and features
externally adjustable bias control circuitry that allows
minimum linearity requirements to be met while reduc-
ing current consumption.
Input
The IN port is a broadband 75 Ω input that provides a
guaranteed minimum input return loss of 7.4dB (allow-
ing for 2:1 VSWR at output) across the 44MHz to
878MHz frequency range. AC-couple the IN port with a
0.1μF DC-blocking capacitor.
Outputs
The OUT1 port is a broadband, 75 Ω , open-collector
output for the LNA. It requires a pullup inductor to V CC
for proper biasing, as well as a 0.1μF DC-blocking
capacitor. See the Applications Information section for
resistor value to improve linearity at the cost of
increased supply current. Increase the resistor value to
decrease supply current and degrade linearity. Use
resistor values greater than 10k Ω . Gain is not signifi-
cantly affected by the R BIAS value.
Applications Information
Inductor Selection
The OUT1 port of the LNA requires a pull-up inductor to
V CC for proper biasing. The exact value of the inductor
is not important as long as it has broadband imped-
ance >150 Ω (<500 Ω ) at 10MHz across the 44MHz to
878MHz frequency band. Table 1 is a list of recom-
mended inductors.
Table 1. OUT1 Pullup Inductor
Recommended Components
proper inductor selection.
The OUT2 port is a broadband, 75 Ω output for the loop-
out amplifier. The loop-out amplifier is internally biased
and does not require a pullup inductor. AC-couple the
OUT2 port with a 0.1μF DC-blocking capacitor.
Bias Circuitry
The linearity and supply current for both amplifiers are
externally programmable with a single resistor, R BIAS ,
from BIAS to GND. A nominal resistor value of 15k Ω
sets an input IP3 of +17.5dBm, an input IP2 of
+27dBm, and a supply current of 93mA. Decrease the
PART NUMBER
BLM11A221S
BLM11A471SG
BLM10A221SG
BLM21A331SG
MANUFACTURER
Murata
Murata
Murata
Murata
6
_______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| SW90W | FLUKEVIEW SCOPEMETER |
| ST-6-20 | XFRMR PWR 115V 10VAC 2.0A |
| JN5139-001-M/00R1T | MODULE 802.15.4 CERM ANT |
| MAX2373ETC+T | IC AMP LNA STEP ATTEN 12-QFN |
| ST-7-20 | XFRMR PWR 115V 10VAC 3.6A |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX2130EUA+ | 功能描述:射频放大器 Broadband Two-Output Low-Noise Amplifier RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
| MAX2130EUA+T | 功能描述:射频放大器 Broadband Two-Output Low-Noise Amplifier RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
| MAX2130EUA-T | 功能描述:射频放大器 Broadband Two-Output Low-Noise Amplifier RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
| MAX2130EVKIT | 功能描述:放大器 IC 开发工具 MAX2130 Eval Kit RoHS:否 制造商:International Rectifier 产品:Demonstration Boards 类型:Power Amplifiers 工具用于评估:IR4302 工作电源电压:13 V to 23 V |
| MAX2135A | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:PLASTIC ENCAPSULATED DEVICES |
发布紧急采购，3分钟左右您将得到回复。