- 您现在的位置：买卖IC网 > Datasheet目录472 > MAX2165EVKIT+ (Maxim Integrated)KIT EVAL FOR MAX2165 Datasheet资料下载
参数资料
| 型号： | MAX2165EVKIT+ |
| 厂商： | Maxim Integrated |
| 文件页数： | 11/24页 |
| 文件大小： | 0K |
| 描述： | KIT EVAL FOR MAX2165 |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 类型： | 调谐器 |
| 频率： | 470MHz ~ 780MHz |
| 适用于相关产品： | MAX2165 |
| 已供物品： | 板 |
Single-Conversion DVB-H Tuner
Table 8. PLL Configuration Register (Address: 0x06)
BIT NAME
RDIV
ICP
CPS
ADLY[1:0]
LF_DIV[2:0]
BIT LOCATION
(0 = LSB)
7
6
5
4, 3
2, 1, 0
FUNCTION
Selects the PLL reference divider:
1 = Divide reference by 2.
0 = Divide reference by 1.
Selects the charge-pump current:
1 = 1.2mA
0 = 0.6mA
Selects how the charge-pump current is programmed:
1 = Charge-pump current is automatically programmed to the optimal setting by the VCO
autotuner.
0 = Charge-pump current is set manually by programming the ICP bit.
Sets the VCO autoselect wait time:
00 = ~200μs
01 = ~400μs
10 = ~800μs
11 = ~1600μs
Sets the prescaler for internal low-frequency clocks; program these bits so the
crystal frequency divided by the prescaler value is equal to 2MHz:
000 = Divide by 8 (for 16MHz crystals).
001 = Divide by 9 (for 18MHz crystals).
010 = Divide by 10 (for 20MHz crystals).
011 = Divide by 11 (for 22MHz crystals).
100 = Divide by 12 (for 24MHz crystals).
101 = Divide by 13 (for 26MHz crystals).
110 = Divide by 14 (for 28MHz crystals).
111 = Divide by 2 (for 4MHz crystals).
Table 9. Test Register (Address: 0x07)
BIT NAME
CP_TST[2:0]
X
LD_MUX[2:0]
BIT LOCATION
(0 = LSB)
7, 6, 5
4, 3
2, 1, 0
FUNCTION
Charge-pump test modes:
000 = Normal operation.
100 = Force charge pump into low-impedance state.
101 = Force charge-pump source current.
110 = Force charge-pump sink current.
111 = Force charge pump into high-impedance state.
Reserved. Set to 01 for normal operation.
Selects which signal is output to the MUX pin:
000 = PLL lock indicator (normal operation).
001 = N-divider output (after divide by 2).
010 = R-divider output (after divide by 2).
011 = Factory use only.
1XX = Factory use only.
______________________________________________________________________________________
11
相关PDF资料 |
PDF描述 |
|---|---|
| MAX2170EVKIT+ | KIT EVAL FOR MAX2170 |
| MAX2202EWT+T | IC POWER DETECTOR RMS 6-WLP |
| MAX2203EWT+T | IC RMS PWR DETECTOR 6WLP |
| MAX2204EVKIT+ | KIT EVAL FOR MAX2204 |
| MAX2205EVKIT+ | KIT EVAL FOR MAX2205 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX2165EVKIT+ | 功能描述:射频开发工具 MAX2165 Eval Kit RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V |
| MAX2169ETL+ | 功能描述:调谐器 Multiband Tuner for Mobile Multi-Media RoHS:否 制造商:NXP Semiconductors 功能: 噪声系数: 工作电源电压: 最小工作温度: 最大工作温度: |
| MAX2169ETL+T | 功能描述:调谐器 Multiband Tuner for Mobile Multi-Media RoHS:否 制造商:NXP Semiconductors 功能: 噪声系数: 工作电源电压: 最小工作温度: 最大工作温度: |
| MAX2169EVKIT# | 功能描述:射频开发工具 MAX2169 Eval Kit RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V |
| MAX216CPN | 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述: |
发布紧急采购，3分钟左右您将得到回复。