- 您现在的位置：买卖IC网 > PDF目录18818 > MAX2309ETI+ (Maxim Integrated)IC CDMA IF VGA/IQ DEMOD 28-TQFN PDF资料下载
参数资料
| 型号： | MAX2309ETI+ |
| 厂商： | Maxim Integrated |
| 文件页数： | 8/20页 |
| 文件大小： | 0K |
| 描述： | IC CDMA IF VGA/IQ DEMOD 28-TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 60 |
| 功能： | IF VGA，I/Q 解调器 |
| 频率： | 70MHz ~ 300MHz |
| RF 型： | CDMA，W-CDMA，WLL |
| 次要属性： | VGA 带 >110dB 增益控制 |
| 封装/外壳： | 28-WFQFN 裸露焊盘 |
| 包装： | 管件 |
CDMA IF VGAs and I/Q Demodulators
with VCO and Synthesizer
Pin Description (continued)
MAX2306
25
26
27
—
—
PIN
MAX2308
25
26
27
28
—
Exposed Paddle
MAX2309
25
26
27
21
28
NAME
BYP
CP_OUT
GND
N.C.
DIVSEL
EP
FUNCTION
Bypass Node. Must be capacitively decoupled (bypassed)
to ground.
Charge-Pump Output
Ground
No Connection
High selects M1/R1; low selects M2/R2.
Ground
_______________Detailed Description
MAX2306
The MAX2306 is intended for dual-band (PCS and cel-
lular) and dual-mode code division multiple access
(CDMA) and FM applications (Figure 1). The device
includes an IF variable-gain amplifier, quadrature
demodulator, dual VCOs, and dual-frequency synthe-
sizers (Functional Diagram ). Dual VCOs are provided
for applications using different IF frequencies for each
mode or band of operation. The analog FM output sig-
nal can be configured for conversion to the I channel,
or it may be converted in quadrature to both the I and
Q channels. The MAX2306 ’s operation modes are
described in Table 1. These modes are set by pro-
gramming the control register and setting logic levels
on control pins. If MODE is left floating, the internal reg-
ister controls the operation. If driven high or low, mode
will override certain register bits, as shown in Table 1.
MAX2308
The MAX2308 supports dual-band, triple mode with
common IF VCO. As with the MAX2306, the FM mode
can be configured for conversion to the I port or quad-
rature conversion to both the I and Q ports (Figure 2).
The MAX2308’s operational modes are described in
Table 2. These modes are set by programming the con-
trol register.
MAX2309
The MAX2309 quadrature demodulators are simplified
versions of the MAX2306 that can be used in single-
mode CDMA or triple mode using an external FM dis-
criminator (Figure 3). The MAX2309 VCO is optimized
for the 67MHz to 300MHz IF frequency range.
The MAX2309 includes a buffered output for the VCO.
The buffered VCO output can be used to support sys-
tems implementing traditional limiting IF stages for FM
demodulation in dual-mode phones as well as for the
transmit LO in TDD systems. This buffered output can
be configured for the VCO frequency (twice the IF fre-
quency) or one-half the VCO frequency (IF frequency).
The BUFEN pin enables this feature. A standby mode,
in which only the VCO and synthesizer are operational,
can be selected through the serial interface or the
STBY pin. The MAX2309 ’s operational modes are
described in Table 3. These modes are set by pro-
gramming the control register and/or setting logic levels
on control pins. If the control pins ( STBY , BUFEN ,
DIVSEL) are left floating, the internal register controls
the operational mode. If driven high or low, the control
pins will override certain register bits, as shown in
Table 3.
Applications Information
Variable-Gain Amplifier and Demodulator
The MAX2306 family provides a VGA with exceptional
gain range. The MAX2306/MAX2308 support multimode
applications with dual differential inputs, selectable with
the IN_SEL (IS) control bit. On the MAX2306, this func-
tion can be controlled with the MODE pin, which over-
rides the IS control bit. The VGA’s gain is controlled
over a 110dB range with the VGC pin. The output of the
VGA drives the RF ports of a quadrature demodulator.
The MAX2306/MAX2308 provide two types of FM
demodulation, controlled by the FM_TYPE (FT) control
bit. When FM_TYPE is “1,” the signal is passed through
both the I and Q signal paths for subsequent lowpass
filtering and A/D conversion at baseband. If FM_TYPE
is “0,” the FM signal is passed through the I mixer only.
8
_______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| B-24-2 | PATCH CORD STKG BANA PLG 24" RED |
| B-36-0 | PATCH CORD STKG BANA PLG 36" BLK |
| AH182-WG-7 | IC HALL SENSOR LP 10MA SC-59 |
| B-36-2 | PATCH CORD STKG BANA PLG 36" RED |
| MC1496BD | IC MODULATOR/DEMODULATOR 14-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX2309ETI+ | 功能描述:调节器/解调器 CDMA If VGAs & I/Q Demodulator w/VCO RoHS:否 制造商:Texas Instruments 封装 / 箱体:PVQFN-N24 封装:Reel |
| MAX2309ETI+T | 功能描述:调节器/解调器 CDMA If VGAs & I/Q Demodulator w/VCO RoHS:否 制造商:Texas Instruments 封装 / 箱体:PVQFN-N24 封装:Reel |
| MAX2309EVKIT | 功能描述:射频开发工具 MAX2306/8/9 Eval Kit RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V |
| MAX2309EVKIT# | 功能描述:射频开发工具 MAX2309 Eval Kit RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V |
| MAX230C/D | 功能描述:RS-232接口集成电路 RoHS:否 制造商:Exar 数据速率:52 Mbps 工作电源电压:5 V 电源电流:300 mA 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:LQFP-100 封装: |
发布紧急采购，3分钟左右您将得到回复。