- 您现在的位置：买卖IC网 > PDF目录383346 > MAX2411A (Maxim Integrated Products, Inc.) Hex Buffers/Drivers With Open-Collector High-Voltage Outputs 14-SOIC 0 to 70 PDF资料下载
参数资料
| 型号： | MAX2411A |
| 厂商： | Maxim Integrated Products, Inc. |
| 英文描述： | Hex Buffers/Drivers With Open-Collector High-Voltage Outputs 14-SOIC 0 to 70 |
| 中文描述： | 低成本、RF上/下变频器，带有LNA及PA驱动器 |
| 文件页数： | 9/14页 |
| 文件大小： | 134K |
| 代理商： | MAX2411A |
_______________Detailed Desc ription
The MAX2411A consists of five major components: a
transmit mixer followed by a variable-gain power-
amplifier (PA) driver as well as a low-noise amplifier
(LNA), receive mixer, and power-management section.
The following sections describe each of the blocks in
the MAX2411A Functional Diagram
Low-Noise Amplifier (LNA)
The LNA is a wideband, single-ended cascode amplifi-
er that can be used over a wide range of frequencies.
Refer to the LNA Gain vs. Frequency graph in the
Typical Operating Characteristics. Its port impedances
are optimized for operation around 1.9GHz, requiring
only a 1pF shunt capacitor at the LNA input for a VSWR
of better than 2:1 and a noise figure of 2.4dB. As with
every LNA, the input match can be traded off for better
noise figure.
PA Driver
The PA driver has typically 15dB of gain, which is
adjustable over a 35dB range via the GC pin. At full gain,
the PA driver has a noise figure of 3.5dB at 1.9GHz.
For input and output matching information, refer to the
Typical Operating Characteristics for plots of PA Driver
Input and Output Impedance vs. Frequency.
Bidirec tional IF Port
The MAX2411A has a unique bidirectional differential IF
port, which can eliminate the need for separate transmit
and receive IF filters, reducing cost and component count.
Consult the Typical Operating Circuit for more information.
For single-ended operation, connect the unused
IF
port to
V
CC
and bypass with a 1000pF capacitor to GND.
In receive mode, the IF and
IF
pins are open-collector
outputs that need external inductive pull-ups to V
CC
for
proper operation. These inductors are typically used as
part of an IF matching network.
In transmit mode, IF and
IF
are high-impedance inputs
that are internally AC coupled to the transmit mixer.
This internal AC coupling prevents the DC bias voltage
required for the receive mixer outputs from reaching
the transmit mixer inputs.
Rec eive Mixer
The receive mixer is a wideband, double-balanced
design with excellent noise figure and linearity. Inputs to
the mixer are the RF signal at the RXMXIN pin and the
LO inputs at LO and
LO
. The downconverted output sig-
nal appears at the IF port. For more information, see the
Bidirectional IF Port section. The conversion gain of the
receive mixer is typically 9.4dB with a 9.2dB noise figure.
RF Input
The RXMXIN input is typically connected to the LNA out-
put through an off-chip filter. This input is externally
matched to 50
. See the Typical Operating Circuit for an
example matching network and the Receive Mixer Input
Impedance vs. Frequency graph in the Typical Operating
Characteristics.
Local-Oscillator Inputs
The LO and
LO
pins are internally terminated with 50
on-chip resistors. AC couple the local-oscillator signal
to these pins. If a single-ended LO source is used, con-
nect
LO
directly to ground.
T ransmit Mixer
The transmit mixer takes an IF signal at the IF port and
upconverts it to an RF frequency at the TXMXOUT pin.
For more information on the IF port, see the Bidirectional
IF Port section. The conversion gain is typically 8.5dB,
and the output 1dB compression point is typically
11.1dBm at 1.9GHz.
M
Low-Cost RF Up/Downc onverter
with LNA and PA Driver
_______________________________________________________________________________________
9
_________________________________________________Pin Desc ription (c ontinued)
PIN
FUNCTION
NAME
RF Input to Receive Mixer (downconverter). This input typically requires a matching network for
connecting to an external filter. AC couple to this pin. See the Typical Operating Characteristics
for a plot of RXMXIN Impedance vs. Frequency.
RXMXIN
24
Receive Mixer Input Ground. Connect GND to the PC board ground plane with minimal inductance.
GND
25
LNA Output Ground. Connect GND to the PC board ground plane with minimal inductance.
GND
26
LNA Output. AC couple to this pin. This output typically provides a VSWR of better than 2:1 at fre-
quencies from 1.7GHz to 3GHz with no external matching components. At other frequencies, a
matching network may be required to match LNAOUT to an external filter. Consult the Typical
Operating Characteristics for a plot of LNA Output Impedance vs. Frequency.
LNAOUT
27
相关PDF资料 |
PDF描述 |
|---|---|
| MAX2424 | 900MHz Image-Reject Receivers with Transmit Mixer |
| MAX2424EAI | Dual monostable multivibrators with Schmitt-trigger inputs 16-PDIP 0 to 70 |
| MAX2426 | Dual monostable multivibrators with Schmitt-trigger inputs 16-PDIP 0 to 70 |
| MAX2426EAI | 900MHz Image-Reject Receivers with Transmit Mixer |
| MAX2510EEI | Low-Voltage IF Transceiver with Limiter/RSSI and Quadrature Modulator |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX2411AE/D | 功能描述:上下转换器 Low-Cost RF Up/Downconverter with LNA and PA Driver RoHS:否 制造商:Texas Instruments 产品:Down Converters 射频:52 MHz to 78 MHz 中频:300 MHz LO频率: 功率增益: P1dB: 工作电源电压:1.8 V, 3.3 V 工作电源电流:120 mA 最大功率耗散:1 W 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PQFP-128 |
| MAX2411AEEI | 功能描述:上下转换器 RF Up/Down Cnvrtr w/LNA & PA Driver RoHS:否 制造商:Texas Instruments 产品:Down Converters 射频:52 MHz to 78 MHz 中频:300 MHz LO频率: 功率增益: P1dB: 工作电源电压:1.8 V, 3.3 V 工作电源电流:120 mA 最大功率耗散:1 W 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PQFP-128 |
| MAX2411AEEI+ | 功能描述:上下转换器 RF Up/Down Cnvrtr w/LNA & PA Driver RoHS:否 制造商:Texas Instruments 产品:Down Converters 射频:52 MHz to 78 MHz 中频:300 MHz LO频率: 功率增益: P1dB: 工作电源电压:1.8 V, 3.3 V 工作电源电流:120 mA 最大功率耗散:1 W 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PQFP-128 |
| MAX2411AEEI+T | 功能描述:上下转换器 RF Up/Down Cnvrtr w/LNA & PA Driver RoHS:否 制造商:Texas Instruments 产品:Down Converters 射频:52 MHz to 78 MHz 中频:300 MHz LO频率: 功率增益: P1dB: 工作电源电压:1.8 V, 3.3 V 工作电源电流:120 mA 最大功率耗散:1 W 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PQFP-128 |
| MAX2411AEEI-T | 功能描述:上下转换器 RF Up/Down Cnvrtr w/LNA & PA Driver RoHS:否 制造商:Texas Instruments 产品:Down Converters 射频:52 MHz to 78 MHz 中频:300 MHz LO频率: 功率增益: P1dB: 工作电源电压:1.8 V, 3.3 V 工作电源电流:120 mA 最大功率耗散:1 W 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PQFP-128 |
发布紧急采购，3分钟左右您将得到回复。