- 您现在的位置：买卖IC网 > PDF目录18821 > MAX2623EUA+T (Maxim Integrated)IC SELF-CONTAINED VCO 8-MSOP PDF资料下载
参数资料
| 型号： | MAX2623EUA+T |
| 厂商： | Maxim Integrated |
| 文件页数： | 4/6页 |
| 文件大小： | 0K |
| 描述： | IC SELF-CONTAINED VCO 8-MSOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 功能： | VCO |
| 频率： | 902MHz ~ 928MHz |
| RF 型： | ISM |
| 次要属性： | 片上 50 欧输出匹配 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 包装： | 带卷 (TR) |
Monolithic Voltage-Controlled Oscillators
Pin Description
PIN
1
2
3
4
5
6
7
8
NAME
N.C.
TUNE
GND
SHDN
V CC
V CC
OUT
GND
FUNCTION
No Connection. Not internally connected.
Oscillator Frequency Tuning Voltage Input. High-impedance input with a voltage input range of 0.4V
(low frequency) to 2.4V (high frequency) adjustment.
Ground Connection for Oscillator and Biasing. Requires a low-inductance connection to the circuit board
ground plane.
Shutdown Logic Input. A high-impedance input logic level low disables the device and reduces supply current
to 0.1μA. A logic level high enables the device.
Output Buffer DC Supply Voltage Connection. Bypass with a 220pF capacitor to GND for best high-
frequency performance.
Bias and Oscillator DC Supply Voltage Connection. Bypass with a 220pF capacitor to GND for low noise
and low spurious content performance from the oscillator.
Buffered Oscillator Output
Ground Connection for Output Buffer. Requires a low-inductance connection to the circuit board
ground plane.
Detailed Description
Oscillator
The MAX2622/MAX2623/MAX2624 VCOs are imple-
mented as an LC oscillator topology, integrating all of
the tank components on-chip. This fully monolithic
approach provides an extremely easy-to-use VCO,
equivalent to a VCO module. The frequency is con-
trolled by a voltage applied to the TUNE pin, which is
internally connected to the varactor. The VCO core
uses a differential topology to provide a stable frequen-
cy versus supply voltage and improve the immunity to
load variations. In addition, there is a buffer amplifier
following the oscillator core to provide added isolation
from load variations and to boost the output power.
Output Buffer
The oscillator signal from the core drives an output
buffer amplifier. The amplifier is constructed as a com-
mon-emitter stage with an integrated on-chip reactive
output match. No external DC blocking capacitor is
required, eliminating the need for any external compo-
nents. The output amplifier has its own V CC and GND
pins to minimize load-pulling effects. The amplifier
boosts the oscillator signal to a level suitable for driving
most RF mixers.
Applications Information
Tune Input
The tuning input is typically connected to the output of
the PLL loop filter. The loop filter is presumed to pro-
vide an appropriately low-impedance source. It may
incorporate an extra RC filter stage to reduce high-fre-
quency noise and spurious signals. Any excess noise
on the tuning input is directly translated into FM noise,
which can degrade the phase-noise performance of the
oscillator. Therefore, it is important to minimize the
noise introduced on the tuning input. A simple RC filter
with low corner frequency is needed during testing in
order to filter the noise present on the voltage source
driving the tuning line.
Layout Issues
Always use controlled impedance lines (microstrip,
coplanar waveguide, etc.) for high-frequency signals.
Always place decoupling capacitors as close to the
V CC pins as possible; for long V CC lines, it may be nec-
essary to add additional decoupling capacitors located
further from the device. Always provide a low-induc-
tance path to ground, and keep GND vias as close to
the device as possible. Thermal reliefs on GND pads
are not recommended.
4
_______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| MCD250-16IO1 | MOD THYRISTOR/DIODE 1600V Y2-DCB |
| V-155-1B5 | SWITCH MINI SPDT 15A ROLLR LEVER |
| MAX2622EUA+ | IC SELF-CONTAINED VCO 8-MSOP |
| D3V-16-1D56-K | SWITCH SNAP 16A SPDT |
| T820129004DH | SCR PHASE CTRL MOD 1200V 900A |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX2623EVKIT | 功能描述:时钟和定时器开发工具 MAX2623 Eval Kit RoHS:否 制造商:Texas Instruments 产品:Evaluation Modules 类型:Clock Conditioners 工具用于评估:LMK04100B 频率:122.8 MHz 工作电源电压:3.3 V |
| MAX2624EUA | 功能描述:VCO振荡器 947MHz - 998MHz Mono V Ctrld Osc RoHS:否 制造商:Exar 封装 / 箱体:SOIC-14 频率:300 kHz 负载电容: 封装:Reel 电源电压:4.5 V to 20 V 尺寸:4 mm W x 8.75 mm L x 1.75 mm H 最小工作温度:0 C 最大工作温度:+ 70 C |
| MAX2624EUA+ | 功能描述:VCO振荡器 947MHz - 998MHz Mono V Ctrld Osc RoHS:否 制造商:Exar 封装 / 箱体:SOIC-14 频率:300 kHz 负载电容: 封装:Reel 电源电压:4.5 V to 20 V 尺寸:4 mm W x 8.75 mm L x 1.75 mm H 最小工作温度:0 C 最大工作温度:+ 70 C |
| MAX2624EUA+T | 功能描述:VCO振荡器 947MHz - 998MHz Mono V Ctrld Osc RoHS:否 制造商:Exar 封装 / 箱体:SOIC-14 频率:300 kHz 负载电容: 封装:Reel 电源电压:4.5 V to 20 V 尺寸:4 mm W x 8.75 mm L x 1.75 mm H 最小工作温度:0 C 最大工作温度:+ 70 C |
| MAX2624EUA-T | 功能描述:VCO振荡器 947MHz - 998MHz Mono V Ctrld Osc RoHS:否 制造商:Exar 封装 / 箱体:SOIC-14 频率:300 kHz 负载电容: 封装:Reel 电源电压:4.5 V to 20 V 尺寸:4 mm W x 8.75 mm L x 1.75 mm H 最小工作温度:0 C 最大工作温度:+ 70 C |
发布紧急采购，3分钟左右您将得到回复。