参数资料
型号: MAX2688EWS+T
厂商: Maxim Integrated
文件页数: 5/8页
文件大小: 0K
描述: IC LNA GPS/GNSS 4WLP
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 2,500
频率: 1575.42MHz
P1dB: -10dBm(0.1mW)
增益: 15.4dB
噪音数据: 0.75dB
RF 型: GPS/GNSS
电源电压: 1.6 V ~ 3.3 V
电流 - 电源: 4.1mA
测试频率: 1575.42MHz
封装/外壳: 4-WFBGA,WLCSP
包装: 带卷 (TR)
GPS/GNSS Low-Noise Amplifiers
Bump Configuration
TOP VIEW
+
V CC
A1
A2
RFOUT (SHDN)
MAX2686
MAX2688
RFIN
B1
B2
GND
WLP
Bump Description
BUMP
A1
A2
B1
B2
NAME
V CC
RFOUT
( SHDN )
RFIN
GND
FUNCTION
Supply Voltage. Bypass to ground with a 10pF capacitor as close as possible to the IC.
RF Output/ SHDN Input. RFOUT is internally matched to 50 I and pulled up to V CC through a 1M I
resistor. SHDN is shared with the RFOUT bump. The devices are in active mode by default once
V CC is applied. RFOUT( SHDN ) can be pulled to a DC low externally to shut down the IC.
RF Input. Requires a DC-blocking capacitor and external matching components.
Ground. Connect to the PCB ground plane.
Detailed Description
The MAX2686/MAX2688 are LNAs designed for GPS
L1, Galileo, and GLONASS applications. The devices
feature an optional power-shutdown control mode to
eliminate the need for an external supply switch. The
devices achieve high gain, ultra-low-noise figure, and
excellent linearity.
Input and Output Matching
The devices require an off-chip input matching. Only
an inductor in series with a DC-blocking capacitor is
needed to form the input matching circuit. The Typical
Application Circuit shows the recommended input-
matching network. These values are optimized for the
best simultaneous gain, noise figure, and return loss
performance. The value of the input coupling capacitor
affects IIP3. A smaller coupling capacitor results in lower
IIP3. The devices integrate an on-chip output matching
to 50 I at the output, eliminating the need for external
matching components. Tables 1 and 2 list typical device
S parameters and K f values. Typical noise parameters
are shown in Tables 3 and 4.
Shutdown
The devices include an optional shutdown feature to
turn off the entire chip. The devices are placed in active
mode by default once V CC is applied, due to the on-chip
pullup resistor to V CC at the RFOUT bump (shared with
the SHDN input). To shut down the part, apply a logic-
low to the RFOUT bump through an external resistor with
an adequate value, e.g., 25k I , in order not to load the
RF output signal during active operation.
5
相关PDF资料
PDF描述
IF-2-40 XFRMR 115/230V 20V 100MA 2VA PCB
A-20GQ21-B7-K SWITCH ROLLER SPDT 20A
XE1203FI063TRLF IC TXRX 433/868/915MHZ 48-VQFN
MAX2687EWS+T IC LNA GPS/GNSS 4WLP
IF-2-34 XFRMR 115/230V 17V 120MA 2VA PCB
相关代理商/技术参数
参数描述
MAX2688LEWS+T 功能描述:射频放大器 GPS/GNSS Low-Noise Amplifier RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel
MAX2688LEWS+T10 功能描述:射频放大器 GPS/GNSS Low-Noise Amplifier RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel
MAX2689EWS+T 功能描述:射频放大器 GPS/GNSS LO-NOISE AMP RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel
MAX2689EWS+T10 功能描述:射频放大器 GPS/GNSS Low-Noise Amplifier RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel
MAX2689LEWS+T 功能描述:射频放大器 GPS/GNSS Low-Noise Amplifier RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel