- 您现在的位置：买卖IC网 > PDF目录18756 > MAX2691EWS+T10 (Maxim Integrated)IC AMP LNA GPS/GNSS 4-WLP PDF资料下载
参数资料
| 型号： | MAX2691EWS+T10 |
| 厂商： | Maxim Integrated |
| 文件页数： | 5/7页 |
| 文件大小： | 0K |
| 描述： | IC AMP LNA GPS/GNSS 4-WLP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 10,000 |
| 频率： | * |
| P1dB： | * |
| 增益： | 17.5dB |
| 噪音数据： | * |
| RF 型： | GPS |
| 电源电压： | 1.6 V ~ 3.6 V |
| 电流 - 电源： | 4.3mA |
| 测试频率： | * |
| 封装/外壳： | 4-WFBGA，WLCSP |
| 包装： | 带卷 (TR) |
MAX2691
L2 Band GPS Low-Noise Amplifier
Bump Configuration
TOP VIEW
+
V CC
A1
A2
RFOUT (SHDN)
MAX2691
RFIN
B1
B2
GND
WLP
Bump Description
BUMP
A1
A2
B1
B2
NAME
V CC
RFOUT
( SHDN )
RFIN
GND
FUNCTION
Supply Voltage. Bypass to ground with a 10pF capacitor as close as possible to the IC.
RF Output/ SHDN Input. RFOUT is internally matched to 50 I and pulled up to V CC through a 1M I
resistor. SHDN is shared with the RFOUT bump. The device is in active mode by default once V CC
is applied. RFOUT( SHDN ) can be pulled to a DC low through a 25k I resistor to shut down the IC.
RF Input. Requires a DC-blocking capacitor and external matching components.
Ground. Connect to the PCB ground plane.
Detailed Description
The MAX2691 LNA is designed for GPS L2 applications.
The device features a power-shutdown control mode
to eliminate the need for an external supply switch.
The device achieves high gain, low noise figure, and
excellent linearity.
Input and Output Matching
The MAX2691 requires an off-chip input match. Only an
inductor in series with a DC-blocking capacitor is needed
to form the input matching circuit. The Typical Application
Circuit shows the recommended input-matching network.
These values are optimized for the best simultane-
ous gain, noise figure, and return loss performance.
Reducing the input coupling capacitor results in a lower
IIP3. The device integrates an on-chip output matching
to 50 I at the output, eliminating the need for external
matching components. Table 1 lists typical device S
parameters and K f values. Typical noise parameters are
shown in Table 2 .
Shutdown
The MAX2691 includes an optional shutdown feature to
turn off the entire chip. The device is placed in active
mode by default once V CC is applied, due to the on-chip
pullup resistor to V CC at the RFOUT bump (shared with
the SHDN input). To shut down the part, apply a logic-low
to the RFOUT bump through an external resistor with an
adequate value, e.g., 25k I , in order not to load the RF
output signal during active operation.
Applications Information
A properly designed PCB is essential to any RF micro-
wave circuit. Use controlled-impedance lines on all
high-frequency inputs and outputs. Bypass V CC with
decoupling capacitors located close to the device. For
long V CC lines, it may be necessary to add decoupling
capacitors. Locate these additional capacitors further
away from the device package. Proper grounding of
the GND pin is essential. If the PCB uses a topside RF
ground, connect it directly to the GND pin. For a board
where the ground is not on the component layer, connect
the GND pin to the board with multiple vias close to the
package.
Refer to www.maxim-ic.com for the MAX2691 EV kit
schematic, Gerber data, PADS layout file, and BOM
information.
????????????????????????????????????????????????????????????????? Maxim Integrated Products 5
相关PDF资料 |
PDF描述 |
|---|---|
| 30-600-LPI | XFRMR PWR 115/230V 30VCT 600MA |
| 24-750-LPI | XFRMR PWR 115/230V 24VCT 750MA |
| MAX2130EUA+T | IC LNA BROADBAND 2OUT 8-UMAX |
| 20-900-LPI | XFRMR PWR 115/230V 20VCT 900MA |
| MAX2645EUB+T | IC AMP/PA PREDRIVER SIGE 10MSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX2691LEWS+T | 功能描述:射频放大器 GPS/GNSS Low-Noise Amplifier RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
| MAX2691LEWS+T10 | 功能描述:射频放大器 GPS/GNSS Low-Noise Amplifier RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
| MAX2692EVKIT# | 功能描述:射频开发工具 MAX2692 Eval Kit RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V |
| MAX2692EWS+ | 制造商:Maxim Integrated Products 功能描述:- Rail/Tube |
| MAX2692EWS+T | 功能描述:射频放大器 WLAN/WiMAX Low-Noise Amp RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。