- 您现在的位置：买卖IC网 > Datasheet目录473 > MAX2695EVKIT# (Maxim Integrated)EVAL KIT MAX2695 Datasheet资料下载
参数资料
| 型号： | MAX2695EVKIT# |
| 厂商： | Maxim Integrated |
| 文件页数： | 6/10页 |
| 文件大小： | 0K |
| 描述： | EVAL KIT MAX2695 |
| 标准包装： | 1 |
| 系列： | * |
MAX2692/MAX2695
WLAN/WiMAX Low-Noise Amplifiers
Bump Configuration
TOP VIEW
+
V CC
A1
A2
RFOUT(SHDN)
MAX2692
MAX2695
RFIN
B1
B2
GND
WLP
Bump Description
BUMP
A1
A2
B1
B2
NAME
V CC
RFOUT
( SHDN )
RFIN
GND
FUNCTION
Supply Voltage. Bypass to ground with a 10pF capacitor as close as possible to the IC.
RF Output/ SHDN Input. RFOUT is internally matched to 50 I and pulled up to V CC through a 25k I
resistor. SHDN is shared with the RFOUT bump. The devices are in active mode by default once
V CC is applied. RFOUT( SHDN ) can be pulled to a DC low externally to shut down the IC.
RF Input. Requires a DC-blocking capacitor and external matching components.
Ground. Connect to the PCB ground plane.
Detailed Description
The MAX2692/MAX2695 are LNAs designed for WLAN/
WiMax applications. The devices feature an optional
power-shutdown control mode to eliminate the need for
an external supply switch. The devices achieve high
gain, low noise figure, and excellent linearity.
Input and Output Matching
The devices require an off-chip input matching. Only an
inductor in series with a DC-blocking capacitor is needed
to form the input matching circuit. The Typical Operating
Circuit shows the recommended input-matching network.
These values are optimized for the best simultaneous
gain, noise figure, and return loss performance. The
devices integrate an on-chip output matching to 50 I at
the output, eliminating the need for external matching
components. Table 1 and Table 2 list typical device S
parameters and K f values. Typical noise parameters are
shown in Table 3 and Table 4 .
Shutdown
The devices include an optional shutdown feature to turn
off the entire chip. The devices are placed in active mode
by default once V CC is applied, due to the on-chip pul-
lup resistor to V CC at the RFOUT bump (shared with the
SHDN input). To shut down the part, apply a logic-low
to the RFOUT bump through an external resistor with an
adequate value, e.g., 25k I , in order not to load the RF
output signal during active operation.
????????????????????????????????????????????????????????????????? Maxim Integrated Products 6
相关PDF资料 |
PDF描述 |
|---|---|
| MAX2741EVKIT | EVAL KIT MAX2741 |
| MAX2742ECM+D | IC GPS RF FRONT END 48TQFP |
| MAX2745ECM+D | IC GPS RF FRONT END 48TQFP |
| MAX2750AUA+ | IC VCO MONO 2.4GHZ 8-MSOP |
| MAX2752EVKIT | EVAL KIT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX2695EVKIT# | 功能描述:射频开发工具 MAX2695 Eval Kit RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V |
| MAX2695EWS+ | 制造商:Maxim Integrated Products 功能描述:- Rail/Tube |
| MAX2695EWS+T | 功能描述:射频放大器 WLAN/WiMAX Low-Noise Amp RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
| MAX2700ECM | 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述: |
| MAX2700ECM+ | 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述: |
发布紧急采购，3分钟左右您将得到回复。