- 您现在的位置：买卖IC网 > PDF目录9789 > MAX3212CAI+T (Maxim Integrated Products)IC TXRX 3DRVR 5RX 28-SSOP PDF资料下载
参数资料
| 型号： | MAX3212CAI+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 11/12页 |
| 文件大小： | 0K |
| 描述： | IC TXRX 3DRVR 5RX 28-SSOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,000 |
| 类型： | 收发器 |
| 驱动器/接收器数： | 3/5 |
| 规程： | RS232 |
| 电源电压： | 2.7 V ~ 3.6 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 28-SSOP（0.209"，5.30mm 宽） |
| 供应商设备封装： | 28-SSOP |
| 包装： | 带卷 (TR) |
MAX3212
Table 2 summarizes the MAX3212 operating modes.
FORCEON and FORCEOFF override the automatic cir-
cuitry and force the transceiver into its normal operat-
ing state or into its low-power standby state. When
neither control is asserted, the IC selects between
these states automatically based on receiver input lev-
els. Figure 4 depicts valid and invalid RS-232 receiver
levels. The MAX3212 shuts down after sensing invalid
RS-232 levels for greater than 30 s, ensuring the
AutoShutdown mode is not enabled for slow-moving
signals (1V/s).
A mouse or another system with AutoShutdown may
need a period of time to wake up. Figure 5 shows a cir-
cuit that forces the transmitters on for 100ms after start-
up, allowing enough time for the other system to realize
that the MAX3212 system is awake. If the other system
outputs valid RS-232 signals within that time, the RS-
232 ports on both systems remain enabled.
Transition Detector
The MAX3212 also has an on-board transition detector
that monitors activity on the receiver inputs. In systems
with a sleep mode, the transition detector output (TRAN)
can be used to wake up the system when activity at the
receiver inputs is detected. Before putting the system to
sleep, set TRAN low by cycling EN high and then low.
TRAN remains low as long as no activity is detected on
the receiver inputs. When any receiver is toggled, TRAN
latches high. Connect TRAN to a microprocessor inter -
rupt, or if the system wakes up periodically TRAN can
be polled. Transition detection is useful when valid RS-
232 levels are present at the receiver inputs but no data
is being sent. For example, if a printer is attached to the
serial port but is not in use, the microprocessor senses
this and forces the MAX3212 off.
+2.7V to +3.6V-Powered, 1A Supply Current,
3-Driver/5-Receiver, True RS-232 Transceiver
8
_______________________________________________________________________________________
INVALID IS AN INTERNALLY GENERATED SIGNAL
THAT IS USED BY THE AUTOSHUTDOWN LOGIC
AND APPEARS AS AN OUTPUT OF THE DEVICE.
POWER DOWN IS ONLY AN INTERNAL SIGNAL.
IT CONTROLS THE OPERATIONAL STATUS OF
THE TRANSMITTERS AND THE POWER SUPPLIES.
FORCEOFF
0
1
FORCEON
0
1
0
1
INVALID
0
1
0
1
0
1
0
1
POWER DOWN
0
1
POWER DOWN
FORCEOFF
FORCEON
INVALID
+
-
+
-
Rx
RIN_
EN
ROUT_
30s
DELAY
+0.3V to +3.0V
-0.3V to -3.0V
Figure 3. AutoShutdown Logic
相关PDF资料 |
PDF描述 |
|---|---|
| AD9238BSTRL-40 | IC ADC 12BIT DUAL 40MSPS 64-LQFP |
| MS27468T25B29PA | CONN RCPT 29POS JAM NUT W/PINS |
| AD9235BRURL7-65 | IC ADC 12BIT 65MSPS 28-TSSOP |
| MS27497E16F35PA | CONN RCPT 55POS WALL MNT W/PINS |
| MAX3222EUP/V+ | TXRX RS-232 ESD PROTECT 20TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX3212CWI | 功能描述:RS-232接口集成电路 RoHS:否 制造商:Exar 数据速率:52 Mbps 工作电源电压:5 V 电源电流:300 mA 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:LQFP-100 封装: |
| MAX3212CWI+T | 功能描述:RS-232接口集成电路 RoHS:否 制造商:Exar 数据速率:52 Mbps 工作电源电压:5 V 电源电流:300 mA 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:LQFP-100 封装: |
| MAX3212CWI-T | 功能描述:RS-232接口集成电路 RoHS:否 制造商:Exar 数据速率:52 Mbps 工作电源电压:5 V 电源电流:300 mA 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:LQFP-100 封装: |
| MAX3212EAI | 功能描述:RS-232接口集成电路 RoHS:否 制造商:Exar 数据速率:52 Mbps 工作电源电压:5 V 电源电流:300 mA 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:LQFP-100 封装: |
| MAX3212EAI+ | 功能描述:RS-232接口集成电路 2.7-3.6V 1uA 3-Drvr 5-Receiver Tsvr RoHS:否 制造商:Exar 数据速率:52 Mbps 工作电源电压:5 V 电源电流:300 mA 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:LQFP-100 封装: |
发布紧急采购，3分钟左右您将得到回复。