- 您现在的位置：买卖IC网 > PDF目录9861 > MAX3450EETE+ (Maxim Integrated Products)TXRX USB +/-15KV ESD PROT 16TQFN PDF资料下载
参数资料
| 型号： | MAX3450EETE+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 4/14页 |
| 文件大小： | 0K |
| 描述： | TXRX USB +/-15KV ESD PROT 16TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 100 |
| 类型： | 收发器 |
| 驱动器/接收器数： | 1/1 |
| 规程： | USB 2.0 |
| 电源电压： | 3 V ~ 3.6 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-WFQFN 裸露焊盘 |
| 供应商设备封装： | 16-TQFN-EP（3x3） |
| 包装： | 管件 |
MAX3450E/MAX3451E/MAX3452E
ESD Protection
D+ and D- possess extra protection against static elec-
tricity to protect the devices up to ±15kV. The ESD
structures withstand high ESD in all operating modes:
normal operation, suspend mode, and powered down.
D+ and D- provide protection to the following limits:
±15kV using the Human Body Model
±8kV using the Contact Discharge method specified
in IEC 1000-4-2
ESD Test Conditions
ESD performance depends on a variety of conditions.
Contact Maxim for a reliability report that documents
test setup, test methodology, and test results.
Human Body Model
Figure 7 shows the Human Body Model and Figure 8
shows the current waveform generated when dis-
charged into a low impedance. This model consists of a
100pF capacitor charged to the ESD voltage of interest,
which then discharges into the test device through a
1.5kΩ resistor.
IEC 1000-4-2
The IEC 1000-4-2 standard covers ESD testing and
performance of finished equipment. It does not specifi-
cally refer to integrated circuits. The major difference
between tests done using the Human Body Model and
IEC 1000-4-2 is a higher peak current in IEC 1000-4-2,
due to lower series resistance. Hence, the ESD with-
stand voltage measured to IEC 1000-4-2 generally is
lower than that measured using the Human Body
Model. Figure 9 shows the IEC 1000-4-2 model. The
Contact Discharge method connects the probe to the
device before the probe is charged.
Machine Model
The Machine Model for ESD tests all connections using
a 200pF storage capacitor and zero discharge resis-
tance. Its objective is to emulate the stress caused by
contact that occurs with handling and assembly during
manufacturing. All pins require this protection during
manufacturing, not just inputs and outputs. After PC
board assembly, the Machine Model is less relevant to
I/O ports.
±15kV ESD-Protected USB Transceivers
12
______________________________________________________________________________________
Figure 8. Human Body Model Current Waveform
IP 100%
90%
36.8%
tRL
TIME
tDL
CURRENT WAVEFORM
PEAK-TO-PEAK RINGING
(NOT DRAWN TO SCALE)
Ir
10%
0
AMPERES
Figure 7. Human Body ESD Test Models
CHARGE-CURRENT-
LIMIT RESISTOR
DISCHARGE
RESISTANCE
STORAGE
CAPACITOR
Cs
100pF
RC
1M
Ω
RD
1.5k
Ω
HIGH-
VOLTAGE
DC
SOURCE
DEVICE
UNDER
TEST
Figure 9. IEC 1000-4-2 ESD Test Model
CHARGE-CURRENT-
LIMIT RESISTOR
DISCHARGE
RESISTANCE
STORAGE
CAPACITOR
Cs
150pF
RC
50
Ω to 100Ω
RD
330
Ω
HIGH-
VOLTAGE
DC
SOURCE
DEVICE
UNDER
TEST
相关PDF资料 |
PDF描述 |
|---|---|
| MAX3452EEUD+ | TXRX USB +/-15KV ESD 14-TSSOP |
| MAX140EPL+ | IC ADC 3 1/2DIG W/LED DVR 40-DIP |
| MAX3452EETE+T | IC USB TRANSCEIVER 16-TQFN |
| MAX3450EEUD+T | TXRX USB +/-15KV ESD 14-TSSOP |
| MAX122ACAG+T | IC ADC 12BIT 333KSPS 24-SSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX3450EETE+ | 功能描述:USB 接口集成电路 USB Transceiver RoHS:否 制造商:Cypress Semiconductor 产品:USB 2.0 数据速率: 接口类型:SPI 工作电源电压:3.15 V to 3.45 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:WLCSP-20 |
| MAX3450EETE+T | 功能描述:USB 接口集成电路 USB Transceiver RoHS:否 制造商:Cypress Semiconductor 产品:USB 2.0 数据速率: 接口类型:SPI 工作电源电压:3.15 V to 3.45 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:WLCSP-20 |
| MAX3450EETE-T | 功能描述:USB 接口集成电路 RoHS:否 制造商:Cypress Semiconductor 产品:USB 2.0 数据速率: 接口类型:SPI 工作电源电压:3.15 V to 3.45 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:WLCSP-20 |
| MAX3450EEUD | 功能描述:USB 接口集成电路 RoHS:否 制造商:Cypress Semiconductor 产品:USB 2.0 数据速率: 接口类型:SPI 工作电源电压:3.15 V to 3.45 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:WLCSP-20 |
| MAX3450EEUD+ | 功能描述:USB 接口集成电路 USB Transceiver RoHS:否 制造商:Cypress Semiconductor 产品:USB 2.0 数据速率: 接口类型:SPI 工作电源电压:3.15 V to 3.45 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:WLCSP-20 |
发布紧急采购，3分钟左右您将得到回复。