- 您现在的位置：买卖IC网 > PDF目录11143 > MAX365ETE+T (Maxim Integrated Products)IC SWITCH QUAD SPST 16TQFN PDF资料下载
参数资料
| 型号： | MAX365ETE+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 11/13页 |
| 文件大小： | 0K |
| 描述： | IC SWITCH QUAD SPST 16TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 功能： | 开关 |
| 电路： | 4 x SPST - NO |
| 导通状态电阻： | 85 欧姆 |
| 电压电源： | 单/双电源 |
| 电压 - 电源，单路/双路(±)： | 10 V ~ 30 V，±4.5 V ~ 20 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-WQFN 裸露焊盘 |
| 供应商设备封装： | 16-TQFN-EP（5x5） |
| 包装： | 带卷 (TR) |
__________Applications Information
Application Hints
1. Switches are open when power is off.
2. IN_, COM_, NO_, and NC_ should not exceed V+ or
V-, even with the power off.
3. Switch leakage is from each analog switch terminal
to V+ or V-, not to the other switch terminal.
Operation with Supply Voltages
Other than ±15VO
The main limitation of supply voltages other than ±15V is
reduction in the analog signal range. The MAX364/MAX365
switches operate with ±5V to ±20V bipolar supplies. The
Typical Operating Characteristics graphs show typical on
resistance for ±15V, ±10V, and ±5V supplies. Switching
times increase by a factor of two or more for ±5V opera-
tion. The MAX364/MAX365 operate from unipolar sup-
plies of +10V to +24V. Both parts can be powered from a
single +10V to +24V supply, as well as from unbalanced
supplies, such as +24V and -5V. Connect V- to 0V when
operating with a single supply. VL must be connected to
+5V to be TTL compatible or to V+ for CMOS logic input
levels.
Overvoltage Protection
Proper power-supply sequencing is recommended for
all CMOS devices. It is important not to exceed the
absolute maximum ratings, because stresses beyond
those listed may cause permanent damage to the
devices. Always sequence V+ on first, followed by VL,
V-, and logic inputs. If power-supply sequencing is not
possible, protect the devices from overvoltage by
adding two small signal diodes in series with the supply
pins (Figure 1). Adding the diodes reduces the analog
signal range to 1V below V+ and 1V below V-, but low
switch resistance and low leakage characteristics are
unaffected. Device operation is unchanged, and the
difference between V+ to V- should not exceed +44V.
MAX364/MAX365
Precision, Quad, SPST Analog Switches
_______________________________________________________________________________________
7
V+
COM_
V-
NO_
Vg
Figure 1. Overvoltage Protection Using Blocking Diodes
相关PDF资料 |
PDF描述 |
|---|---|
| MAX4053CEE+ | IC MULTIPLEXER TRIPLE 2X1 16QSOP |
| MAX4052CEE+ | IC MULTIPLEXER DUAL 4X1 16QSOP |
| VE-B1F-IY-F3 | CONVERTER MOD DC/DC 72V 50W |
| VE-B1F-IY-F2 | CONVERTER MOD DC/DC 72V 50W |
| MAX4658EUA+T | IC SWITCH SPST 8UMAX |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX3660ETE+ | 功能描述:跨阻抗放大器 Analog CATV Transimpedance Amp RoHS:否 制造商:Texas Instruments 封装 / 箱体:SOIC-14 带宽:3 MHz 工作电源电压:36 V 电源电流:5.5 mA 工作温度范围:- 40 C to + 85 C 封装:Tube |
| MAX3660ETE+T | 功能描述:跨阻抗放大器 Analog CATV Transimpedance Amp RoHS:否 制造商:Texas Instruments 封装 / 箱体:SOIC-14 带宽:3 MHz 工作电源电压:36 V 电源电流:5.5 mA 工作温度范围:- 40 C to + 85 C 封装:Tube |
| MAX3660EVKIT | 制造商:Maxim Integrated Products 功能描述:PCB THAT PROVIDES AN OPTICAL INPUT WITH AN ELECTRICAL OUTPUT - Bulk |
| MAX3663ETG | 功能描述:激光驱动器 RoHS:否 制造商:Micrel 数据速率:4.25 Gbps 工作电源电压:3 V to 3.6 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:QFN-16 封装:Tube |
| MAX3663ETG+ | 功能描述:激光驱动器 Integrated Circuits (ICs) RoHS:否 制造商:Micrel 数据速率:4.25 Gbps 工作电源电压:3 V to 3.6 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:QFN-16 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。