参数资料
型号: MAX4399CTK+TD
厂商: Maxim Integrated Products
文件页数: 2/33页
文件大小: 0K
描述: IC SW A/V SCART CON 68-TQFN
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 2,500
类型: 开关
应用: 接收器,机顶盒,电视
安装类型: 表面贴装
封装/外壳: 68-TQFN 裸露焊盘
供应商设备封装: 68-TQFN-EP(10x10)
包装: 带卷 (TR)
MAX4399
Detailed Description
The MAX4399 audio/video switch matrix connects audio
and video signals between different ports. In the case of
a set-top box, the ports consist of the MPEG decoder
and three SCART connectors. For DVD+RW recorders
and some televisions, the ports consist of the main
board, front panel, tuner, and two SCART connectors.
The video section consists of input buffers, a crosspoint
switch, and output drivers that can be disabled. There
is also a mixer, which creates a composite video signal
from S-video. The video inputs can be set in either
clamp or bias mode. The red/chroma outputs have pull-
downs that connect the outputs to video ground as
described in the Video Inputs section.
The audio section features input buffers, a crosspoint
switch, and output drivers. The TV audio path has vol-
ume control from -56dB to +6dB in 2dB steps. The VCR
and AUX audio paths have volume control from -6dB to
+6dB in 6dB steps. The MAX4399 can be configured to
switch inputs during a zero crossing to reduce clicks.
The MAX4399 can also switch volume levels during a
zero crossing to reduce zipper noise. The audio out-
puts can operate in different modes. For instance, left
and right audio channels can be swapped (see the
Audio Outputs section).
The MAX4399 has two fast-switching inputs and one
fast-switching output. Fast switching is used for creat-
ing on-screen displays by switching between the CVBS
and RGB signals. Under I2C-compatible control, the
fast-switching output can follow either of the fast-
switching inputs or be set high or low.
The MAX4399 features three slow-switching input/out-
puts to support slow switching, which sets the screen
aspect ratio or video source of the display device. The
slow switching relies on tri-level logic in which the levels
are 0V, 6V, and 12V. The status of the slow-switching
input is continuously read and stored in register 0Eh. If
INTERRUPT_OUT is enabled, then INTERRUPT_OUT
changes to a high-impedance state if any of the slow-
switching inputs change logic levels. The slow-switching
outputs can be set to a logic level or high impedance by
writing to registers 07h, 09h, or 0Bh.
The MAX4399 can be configured through an I2C-com-
patible interface. DEV_ADDR sets the I2C-compatible
address.
SCART Video Switching
The MAX4399 triple SCART audio/video switch
includes multiplexed video amplifiers and a Y-C mixer-
driver with a trap filter to drive an RF modulator. The
MAX4399 switches video from an MPEG decoder out-
put and TV, VCR, and AUX SCART connectors.
Audio/Video Switch for Three SCART
Connectors
10
______________________________________________________________________________________
Pin Description (continued)
PIN
NAME
FUNCTION
53
TV_Y/CVBS_IN
TV SCART Luma/Composite Video Input. Internally biased at 1.22V.
54
AUX_R/C_IN
AUX SCART Red/Chroma Video Input. Internally biased at 1.22V for red, or 1.8V for chroma.
55
AUX_Y/CVBS_IN
AUX SCART Luma/Composite Video. Internally biased at 1.22V.
56
VCR_Y/CVBS_IN
VCR SCART Luma/Composite Video Input. Internally biased at 1.22V.
57
VCR_FS_IN
VCR SCART Fast-Switching Input
58
VCR_R/C_IN
VCR SCART Red/Chroma Video Input. Internally biased at 1.22V for red, or 1.8V for chroma.
59
VCR_G_IN
VCR SCART Green Video Input. Internally biased at 1.22V.
60
VCR_B_IN
VCR SCART Blue Video Input. Internally biased at 1.22V.
62
ENC_Y/CVBS_IN
Digital Encoder Luma/Composite Video Input. Internally biased at 1.22V.
63
ENC_R/C_IN
Digital Encoder Red/Chroma Video Input. Internally biased at 1.22V for red, or 1.8V for
chroma.
64
ENC_G_IN
Digital Encoder Green Video Input. Internally biased at 1.22V.
65
ENC_B_IN
Digital Encoder Blue Video Input. Internally biased at 1.22V.
66
ENC_Y_IN
Digital Encoder Luma Video Input. Internally biased at 1.22V.
67
ENC_C_IN
Digital Encoder Chroma Video Input. Internally biased at 1.8V.
68
ENC_FS_IN
Digital Encoder Fast-Switching Input
相关PDF资料
PDF描述
13182-7SG-331 CONN PLUG 7POS CABLE SKT
MS3110F16-8P CONN RCPT 8POS WALL MNT W/PINS
13182-7SG-326 CONN PLUG 7POS CABLE SKT
MAX4399CTK+ IC SW A/V SCART CON 68-TQFN
97-3108B-22-22S CONN PLUG 4POS RT ANG W/SKT
相关代理商/技术参数
参数描述
MAX4399EVKIT 功能描述:视频 IC 开发工具 RoHS:否 制造商:Texas Instruments 产品:Evaluation Boards 类型:YPbPr to RGBHV Converters 工具用于评估:LMH1251 工作电源电压:5 V
MAX439CPA 制造商:Maxim Integrated Products 功能描述:
MAX439CSA-W 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述:
MAX439EPA 制造商:Maxim Integrated Products 功能描述:CONTACT FACTORY - Rail/Tube
MAX44000EDT+T 功能描述:环境光传感器 Digital Ambient Proximity Sensor RoHS:否 制造商:Vishay Semiconductors 工作电源电压: 峰值波长:570 nm 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:T-1 封装:Bulk