
MAX4621/MAX4622/MAX4623
Dual, 5
Analog Switches
2
_______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS—Dual Supplies
(V+ = +15V, V- = -15V, VL = +5V, GND = 0, VINH = +2.4V, VINL = +0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values
are at TA = +25°C.) (Note 2)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
(Voltages Referenced to GND)
V+ to GND ..............................................................-0.3V to +44V
V- to GND ...............................................................+0.3V to -44V
V+ to V-...................................................................-0.3V to +44V
VL to GND.....................................................-0.3V to (V+ + 0.3V)
All Other Pins to GND (Note 1) ........... (V- - 0.3V) to (V+ + 0.3V)
Continuous Current (COM_, NO_, NC_) ........................±100mA
Peak Current (COM_, NO_, NC_)
(pulsed at 1ms, 10% duty cycle) ............................... ±300mA
Continuous Power Dissipation (TA = +70°C)
Narrow SO (derate 8.70mW/°C above +70°C) .............696mW
Narrow DIP (derate 10.53mW/°C above +70°C) ..........842mW
Operating Temperature Ranges
MAX462_C_ _ ......................................................0°C to +70°C
MAX462_E_ _....................................................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
CONDITIONS
35
V
V-
V+
VCOM_,
VNO_,
VNC_
Input Voltage Range
(Note 3)
UNITS
MIN
TYP
MAX
SYMBOL
PARAMETER
Note 1: Signals on NO_, NC_, or COM_ exceeding V+ or V- are clamped by internal diodes. Limit forward-diode current to maxi-
mum current rating.
TA = +25°C
ICOM_ = 10mA,
VNO_ or VNC_ = ±10V
7
RON
On-Resistance
TA = TMIN to TMAX
0.25
0.5
TA = +25°C
ICOM_ = 10mA,
VNO_ or VNC_ = ±10V
0.7
RON
On-Resistance Match
Between Channels
(Notes 3, 4)
TA = TMIN to TMAX
-0.5
0.01
0.5
TA = +25°C
0.2
0.5
VNO_ or VNC_ = ±10V,
VCOM_ = –
+10V
nA
TA = +25°C
ICOM_ = 10mA;
VNO_ or VNC_ = -5V,
0, 5V
0.7
RFLAT(ON)
On-Resistance Flatness
(Notes 3, 5)
TA = TMIN to TMAX
-5
5
INO_, INC_
Off-Leakage Current
(NO_ or NC_) (Note 6)
TA = TMIN to TMAX
-1
0.02
1
TA = +25°C
-0.5
0.01
0.5
VCOM_ = ±10V,
VNO_ or VNC_ = –
+10V
or floating
nA
TA = +25°C
VCOM_ = ±10V,
VNO_ or VNC_ = –
+10V
nA
-5
5
ICOM_(OFF)
COM_ Off-Leakage Current
(Note 6)
TA = TMIN to TMAX
-10
10
ICOM_(ON)
COM_ On-Leakage Current
(Note 6)
TA = TMIN to TMAX
VINL
Logic Input Voltage Low
V
2.4
V
0.8
VINH
Logic Input Voltage High
VIN_ = 0.8V
-0.5
0.001
0.5
A
IINL
Input Current with Input
Voltage Low
VIN_ = 2.4V
-0.5
0.001
0.5
A
IINH
Input Current with Input
Voltage High
ANALOG SWITCH
LOGIC INPUT