
MAX4677/MAX4678/MAX4679
2
, Quad, SPST, CMOS Analog Switches
2
_______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS–Dual Supplies
(V+ = +5V ±10%, V- = -5V ±10%, VL = +2.7V to V+, GND = 0, VIH = +2.4V, VIL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.
Typical values are at TA = +25°C.) (Note 2)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
V+ to GND ..............................................................-0.3V to +12V
V- to GND ...............................................................+0.3V to -12V
V+ to V- ................................................................................+12V
VL, IN_ to GND (Note 1) ...............................-0.3V to (V+ + 0.3V)
VCOM_, VNC_, VNO_ (Note 1)............................................V- to V+
Current (any terminal).......................................................±50mA
Continuous Current (COM_, NC_, NO_).........................±100mA
Peak Current (COM_, NC_, NO_
pulsed at 1ms 10% duty cycle) .................................±200mA
Continuous Power Dissipation (TA = +70°C)
16-Pin Plastic DIP (derate 10.5mW/°C above +70°C)..842mW
16-Pin TSSOP (derate 5.7mW/°C above +70°C)..........457mW
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Junction Temperature ......................................................+150°C
Lead Temperature (soldering, 10s) .................................+300°C
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
ANALOG SWITCH
Input Voltage Range
VCOM_,
VNO_, VNC_
V-
V+
V
TA = +25
°C
1.2
1.6
On-Resistance
RON
V+ = 4.5V, V- = -4.5V,
ICOM_ = 50mA,
VNO_ or VNC_ = ±3.3V
TA = TMIN to TMAX
2
TA = +25
°C
0.2
0.3
On-Resistance Match
Between Channels
(Note 3)
RON
V+ = 4.5V, V- = -4.5V,
ICOM_ = 50mA, VNO_ or
VNC_ = ±3.3V
TA = TMIN to TMAX
0.5
TA = +25
°C
0.2
0.4
On-Resistance Flatness
(Note 4)
RFLAT
V+ = 4.5V, V- = -4.5V,
ICOM_ = 50mA, VNO_ or
VNC_ = ±3.3V, 0
TA = TMIN to TMAX
0.5
TA = +25
°C
-1
0.1
1
NC_ or NO_ Off-Leakage
Current (Note 5)
IN_(OFF)
V+ = +5.5V, V- = -5.5V,
VNO_ or VNC_ = ±4.5V,
VCOM_ = +4.5V
TA = TMIN to TMAX
-10
10
nA
TA = +25
°C
-1
0.1
1
COM_ Off-Leakage
Current (Note 5)
ICOM_(OFF)
V+ = +5.5V, V- = -5.5V,
VNO_ or VNC_ = ±4.5V,
VCOM_ = +4.5V
TA = TMIN to TMAX
-10
10
nA
TA = +25
°C
-2
0.2
2
COM_ On-Leakage
Current (Note 5)
ICOM_(ON)
V+ = +5.5V, V- = -5.5V,
VCOM_ = ±4.5V,
VNO_ or VNC_ = ±4.5V or
floating
TA = TMIN to TMAX
-25
25
nA
LOGIC INPUT
Input Logic High
VIH
VL = V+
2.4
V
Input Logic Low
VIL
VL = V+
0.8
V
Input Leakage Current
IIN
VL = V+
-1
0.005
1
A
Note 1: Signals on NC_, NO_, COM_, or IN_ exceeding V+ or V- are clamped by internal diodes. Limit forward diode current to
maximum current rating.