参数资料
型号: MAX4971EWC+T
厂商: Maxim Integrated Products
文件页数: 6/9页
文件大小: 0K
描述: IC OVERVOLTAGE PROT CTRLR 12WLP
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 2,500
应用: 过压保护控制器
输入电压: 2.2 V ~ 28 V
电流 - 电源: 60µA
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 12-WFBGA,WLCSP
供应商设备封装: 12-WLP
包装: 带卷 (TR)
Overvoltage-Protection Controllers
with a Low R ON Internal FET
Functional Diagram
IN
OVERCURRENT
OUT
R GPPU
FAULT
CHARGE
PUMP
START
GP
R GPPD
+
TEMPERATURE
FAULTS
15ms
DEBOUNCE
TIMER AND
RETRY TIME
V BG
REFERENCE
-
+
EN
OSCILLATOR
-
ACOK
MAX4970
MAX4971
LOGIC
CONTROL
EN
MAX4972
Detailed Description
The MAX4970/MAX4971/MAX4972 overvoltage protec-
tion devices feature a low R ON internal FET and protect
low-voltage systems against voltage faults up to +28V.
If the input voltage exceeds the overvoltage threshold,
the internal MOSFET is turned off to prevent damage to
the protected components. These devices also drive an
optional external pFET to protect against reverse-polari-
ty input voltages. The 15ms debounce time prevents
false turn-on of the internal nFET during startup.
Device Operation
The MAX4970/MAX4971/MAX4972 have timing logic
that control the turn-on of the internal nFET. The timing
logic controls the turn-on of the charge pump and the
state of the open-drain ACOK output. If V IN < V UVLO or
if V IN > V OVLO , the timing logic disables the charge
pump. If V UVLO < V IN < V OVLO , the internal charge
pump is enabled. The charge-pump startup, after a
15ms debounce delay, turns on the internal nFET (see
the Functional Diagram). ACOK is high impedance dur-
ing startup until the ACOK 15ms debounce period
expires. At this point, the device is in its on state. At any
time, if V IN drops below V UVLO or rises above V OVLO ,
the charge pump is disabled.
GND
Internal nFET
The MAX4970/MAX4971/MAX4972 incorporate an inter-
nal nFET with a 40m Ω (typ) R ON . The nFET is internally
driven by a charge pump that generates a 5V voltage
above IN. The internal nFET is equipped with 2.3A (min)
current-limit protection that turns off the nFET within
10μs (typ) during an overcurrent fault condition.
Autoretry
The MAX4970/MAX4971/MAX4972 have an overcurrent
autoretry function that turns on the nFET again after a
15ms (typ) retry time (see Figure 2). The fast turn-off
time and 15ms retry time result in a very low duty cycle
to keep power consumption low. If the faulty load con-
dition is not present, the nFET remains on.
GP gate Drive
The GP gate drive is controlled by internal logic and by
the EN input. When EN is high, the internal pullup
between GP and IN is active, thus disabling the exter-
nal pFET, and the load is protected against negative
voltages down to the voltage rating of the external
pFET. When EN is active (low), and the input voltage at
IN is above the UVLO threshold, the pulldown between
GP and IN is active, thus enabling the external pFET.
6
_______________________________________________________________________________________
相关PDF资料
PDF描述
MAX4981ETA+T IC OVERVOLTAGE PROT CTRLR 8TDFN
MAX5003ESE+ IC REG CTRLR FLYBK ISO VM 16SOIC
MAX5005BCUB+ IC REG USB LDO 150MA 10-UMAX
MAX5008CUB+T IC CHARGE PUMP USB 5V 10-UMAX
MAX5015ESA+T IC REG CTRLR ISO PWM CM 8-SOIC
相关代理商/技术参数
参数描述
MAX4972EBC+T 功能描述:电流和电力监控器、调节器 Overvoltage-Protect Controller RoHS:否 制造商:STMicroelectronics 产品:Current Regulators 电源电压-最大:48 V 电源电压-最小:5.5 V 工作温度范围:- 40 C to + 150 C 安装风格:SMD/SMT 封装 / 箱体:HPSO-8 封装:Reel
MAX4972EWC+T 功能描述:电流和电力监控器、调节器 Overvoltage-Protect Controller RoHS:否 制造商:STMicroelectronics 产品:Current Regulators 电源电压-最大:48 V 电源电压-最小:5.5 V 工作温度范围:- 40 C to + 150 C 安装风格:SMD/SMT 封装 / 箱体:HPSO-8 封装:Reel
MAX4978ETA+ 制造商:Maxim Integrated Products 功能描述:OVERVOLTAGE PROTECTOR WITH ACTIVE C - Rail/Tube
MAX4978ETA+T 功能描述:电流和电力监控器、调节器 Overvoltage-Protect Controller RoHS:否 制造商:STMicroelectronics 产品:Current Regulators 电源电压-最大:48 V 电源电压-最小:5.5 V 工作温度范围:- 40 C to + 150 C 安装风格:SMD/SMT 封装 / 箱体:HPSO-8 封装:Reel
MAX497C/D 功能描述:运算放大器 - 运放 RoHS:否 制造商:STMicroelectronics 通道数量:4 共模抑制比(最小值):63 dB 输入补偿电压:1 mV 输入偏流(最大值):10 pA 工作电源电压:2.7 V to 5.5 V 安装风格:SMD/SMT 封装 / 箱体:QFN-16 转换速度:0.89 V/us 关闭:No 输出电流:55 mA 最大工作温度:+ 125 C 封装:Reel