- 您现在的位置：买卖IC网 > PDF目录1842 > MAX5008CUB+T (Maxim Integrated Products)IC CHARGE PUMP USB 5V 10-UMAX PDF资料下载
参数资料
| 型号： | MAX5008CUB+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 5/7页 |
| 文件大小： | 0K |
| 描述： | IC CHARGE PUMP USB 5V 10-UMAX |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 应用： | 转换器，USB |
| 输入电压： | 2.95 V ~ 5.5 V |
| 输出数： | 1 |
| 输出电压： | 5V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-TFSOP，10-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 10-µMAX |
| 包装： | 带卷 (TR) |
Regulated 5V USB Charge Pump with
Programmable Current Limit
Pin Description
PIN
1
2
3
4
5
6
7
8
9
10
NAME
RCS
OUT
FAULT
GND
SHDN
PGND
CXN
IN
CXP
CEXT
FUNCTION
External Current-Sense Resistor. Connect a resistor from RCS to OUT to set the overcurrent
threshold. I LIMIT = 60mV / R CS .
Fixed 5V Output. Bypass OUT to GND with a 4.7μF capacitor.
Output Fault Indicator. FAULT is asserted when either I OUT > I LIMIT or V OUT < V TH . FAULT is an
open-drain output that is high during normal operation or during shutdown.
Ground Pin. Connect GND to PGND.
Shutdown Input. When SHDN = low, the device turns off. Drive SHDN high or connect to IN for
normal operation.
Power Ground Pin. Connect PGND to GND.
Negative Terminal of the Charge-Pump Capacitor. Connect a 0.68μF capacitor from CXN to CXP.
Input Supply, 2.95V to 5.5V. Bypass IN to GND with a 4.7μF ceramic capacitor.
Positive Terminal of the Charge-Pump Capacitor. Connect a 0.68μF capacitor from CXP to CXN.
Charge-Pump Output. Bypass CEXT to PGND with a 6.8μF capacitor.
Detailed Description
The MAX5008 charge pump provides a regulated 5V
output from a 2.95V to 5.5V input. The device delivers a
maximum of 125mA load current. Designed specifically
for compact applications, a complete regulator circuit
requires a minimum number of external components.
Adjustable Current Limit
The MAX5008 has an adjustable overcurrent protec-
tion. An external current-sense resistor is connected
from RCS to OUT to set the current limit. The current
limit is defined by:
I LIMIT = V CS / RCS
where V CS is the current-sense trip level, typically 60mV.
For example, I LIMIT = 150mA when RCS = 0.40 ? .
When the output current limit is exceeded, the output
voltage falls and the device maintains the average out-
put current at I LIMIT . Upon removal of the overcurrent
condition, the part resumes normal operation.
FAULT Indication
When I OUT > I LIMIT or V OUT < V TH , FAULT asserts.
FAULT is an open-drain output that needs to be con-
nected through a 100k ? (typ) pullup resistor to a logic
supply voltage.
Shutdown Mode
Driving SHDN low places the device in shutdown
mode, which disables the oscillator, the control logic,
and the reference. The output goes into high-imped-
ance state and drops to ground if loaded. Placing the
device in shutdown mode reduces the supply current
to less than 0.1μA. In normal operation, SHDN is driven
high or connected to IN.
Applications Information
Capacitor Selection
The MAX5008 requires four external capacitors. Their
values depend on the required output current. Table 1
shows the capacitor values recommended for different
load currents.
Input Voltage Range
The MAX5008 maintains a regulated 5V output with
input voltages from 2.95V to 5.5V. If the input voltage
exceeds 4.25V, limit the output current to 75mA or less.
This keeps the MAX5008 within its maximum power dis-
sipation limits.
Table 1. Recommended Capacitor Values
I OUT C IN (μF) C X (μF) C EXT (μF) C OUT (μF)
50mA
3.3
0.33
3.3
3.3
Thermal Shutdown
The MAX5008 has internal thermal shutdown circuitry,
125mA
4.7
0.68
6.8
4.7
which shuts down the device when the die temperature
exceeds +150°C. The thermal shutdown circuitry has
30°C hysteresis.
Layout Considerations
All capacitors should be located as close to the IC as
practical. Connect GND and PGND through a short,
_______________________________________________________________________________________
5
相关PDF资料 |
PDF描述 |
|---|---|
| MAX5015ESA+T | IC REG CTRLR ISO PWM CM 8-SOIC |
| MAX5020CSA+T | IC REG CTRLR FLYBK ISO PWM 8SOIC |
| MAX5022EUA+ | IC REG CTRLR FLYBK ISO PWM 8UMAX |
| MAX5023LASA+ | IC REG LDO 5V .15A 8-SOIC |
| MAX5026EUT+T | IC REG BOOST ADJ 40MA SOT23-6 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX5008EUB+ | 制造商:Maxim Integrated Products 功能描述:- Rail/Tube |
| MAX5009OEPA+ | 制造商:Maxim Integrated Products 功能描述:- Rail/Tube |
| MAX500ACPE | 功能描述:数模转换器- DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| MAX500ACPE+ | 功能描述:数模转换器- DAC 8-Bit 4Ch Precision DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| MAX500ACWE | 功能描述:数模转换器- DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。