- 您现在的位置：买卖IC网 > PDF目录16548 > MAX5043ETN+T (Maxim Integrated Products)IC PWR W/MOSFET HS 56-TQFN PDF资料下载
参数资料
| 型号： | MAX5043ETN+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 10/22页 |
| 文件大小： | 0K |
| 描述： | IC PWR W/MOSFET HS 56-TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 系列： | * |
Two-Switch Power ICs with Integrated
Power MOSFETs and Hot-Swap Controller
Pin Description
MAX5042
PIN
MAX5043
NAME
FUNCTION
1, 2, 14, 15,
40, 42–45, 56
1, 2, 14, 15,
40, 42–45, 56
N.C.
No Connection. Not internally connected.
Voltage-Mode PWM Ramp. Connect a resistor to the input supply and a capacitor to
3
3
RCFF
PWMNEG for input voltage feed-forward. Input voltage feed-forward provides
instantaneous input-voltage transient rejection and constant loop gain with varying
input voltage.
4
5
6
7
8
9
4
5
6
7
8
9
RAMP
OPTO
CSS
BST
DRVIN
PWMPNEG
PWM Ramp Input. For voltage-mode control, connect RAMP to RCFF. For current-
mode control, connect RAMP to CSOUT, the output of the current-sense amplifier.
Inverting Input of the PWM Comparator. Connect OPTO to the collector of the
optotransistor. Connect a pullup resistor from OPTO to REG5.
Soft-Start. Connect a capacitor from CSS to PWMNEG to soft-start the converter.
Boost-Capacitor Bypass for High-Side MOSFET Gate Drive. Connect a 0.1μF
capacitor from BST to XFRMRH for the internal high-side MOSFET driver.
Low-Side MOSFET Driver Supply. Bypass DRVIN with a 0.22μF capacitor to
PWMPNEG.
Low-Side MOSFET Driver Return. Connect PWMPNEG externally to PWMNEG with a
short trace.
Oscillator Timing Resistor and Capacitor Connection. Connect a capacitor from
10
10
RCOSC
RCOSC to PWMNEG and a resistor from RCOSC to REG5. The switching frequency
is half the frequency of the sawtooth signal at this connection.
Fault Integration Input. Use FLTINT in addition to cycle-by-cycle current limit. During
persistent current-limit faults, a capacitor connected to FLTINT charges with an
11
11
FLTINT
internal 80μA current source. Switching terminates when the voltage reaches 2.7V.
An external resistor connected in parallel discharges the capacitor. Switching
resumes when the voltage drops to 1.8V.
12
12
SYNC
Synchronization Input. The switching frequency of the power supply is half the
synchronization frequency, ensuring less than 50% maximum duty cycle.
Latched Shutdown Input. Pull PWMSD low with respect to PWMNEG to stop
switching. To restart, release PWMSD and cycle the input supply. Do not leave
13
13
PWMSD
PWMSD unconnected. Use PWMSD to prevent catastrophic secondary rectifier
overheating by monitoring the temperature and issuing a shutdown command with
an optocoupler. Connect PWMSD to REG5 when not used.
16, 17, 20,
21, 24
16, 17, 20,
21, 24
SRC
Source Connection for the Internal Low-Side Power MOSFET. Connect SRC to
PWMPNEG with a low-value resistor for current limiting.
18, 19, 22, 23 18, 19, 22, 23
XFRMRL
Low-Side Connection for the Isolation Transformer
25
—
POSINHS
Hot-Swap Controller Positive Input Supply (MAX5042 Only). Connect POSINHS
along with POSINPWM to the most positive rail of the input supply.
10
______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| MAX5058AUI+ | IC DRVR SYNC RECT 28-TSSOP |
| RMA10DTKH | CONN EDGECARD 20POS DIP .125 SLD |
| MAX5058EUI+ | IC DRVR SYNC RECT 28-TSSOP |
| RSA10DTKD | CONN EDGECARD 20POS DIP .125 SLD |
| RMA10DTKD | CONN EDGECARD 20POS DIP .125 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX5048 | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:7.6A, 12ns, SOT23 MOSFET Driver |
| MAX5048_05 | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:7.6A, 12ns, SOT23/TDFN, MOSFET Driver |
| MAX5048AASA+ | 制造商:Maxim Integrated Products 功能描述:- Rail/Tube |
| MAX5048AATT | 制造商:Maxim Integrated Products 功能描述:HIGH-SPEED HIGH-CURRENT SOT23 MOS - Rail/Tube |
| MAX5048AATT+ | 制造商:Maxim Integrated Products 功能描述:MOSFET DRVR 7.6A 1-OUT LO SIDE INV/NON-INV 6TDFN EP - Rail/Tube |
发布紧急采购，3分钟左右您将得到回复。