- 您现在的位置：买卖IC网 > PDF目录8530 > MAX5189BEEI+T (Maxim Integrated Products)IC DAC 8BIT DUAL 40MHZ 28-QSOP PDF资料下载
参数资料
| 型号： | MAX5189BEEI+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 13/14页 |
| 文件大小： | 0K |
| 描述： | IC DAC 8BIT DUAL 40MHZ 28-QSOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 设置时间： | 25µs |
| 位数： | 8 |
| 数据接口： | 并联 |
| 转换器数目： | 2 |
| 电压电源： | 模拟和数字 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 28-SSOP（0.154"，3.90mm 宽） |
| 供应商设备封装： | 28-QSOP |
| 包装： | 带卷 (TR) |
| 输出数目和类型： | 4 电压，单极 |
| 采样率（每秒）： | * |
MAX5186/MAX5189
Dual, 8-Bit, 40MHz, Current/Voltage,
Simultaneous-Output DACs
8
_______________________________________________________________________________________
Detailed Description
The MAX5186/MAX5189 are dual, 8-bit digital-to-ana-
log converters (DACs) capable of operating with clock
speeds up to 40MHz. Each of these dual converters
consists of separate input and DAC registers, followed
by a current source array capable of generating up to
1.5mA full-scale output current (Figure 1). An integrat-
ed 1.2V voltage reference and control amplifier deter-
mine the data converters’ full-scale output currents/
voltages. Careful reference design ensures close gain
matching and excellent drift characteristics. The
MAX5189’s voltage output operation features matched
400
on-chip resistors that convert the current array
current into a voltage.
Internal Reference and
Control Amplifier
The MAX5186/MAX5189 provide an integrated
50ppm/°C, 1.2V, low-noise bandgap reference that can
be disabled and overridden by an external reference
voltage. REFO serves either as an external reference
input or an integrated reference output. If REN is con-
nected to DGND, the internal reference is selected and
REFO provides a 1.2V output. Due to its limited 10A
output drive capability, REFO must be buffered with an
external amplifier if heavier loading is required.
The MAX5186/MAX5189 also employ a control amplifier
designed to simultaneously regulate the full-scale out-
put current (IFS) for both outputs of the devices. The
output current is calculated as follows:
IFS = 8 IREF
where IREF is the reference output current (IREF =
VREFO/RSET) and IFS is the full-scale output current.
RSET is the reference resistor that determines the
amplifier’s output current on the MAX5186 (Figure 2).
This current is mirrored into the current source array
where it is equally distributed between matched current
segments and summed to valid output current readings
for the DACs.
The MAX5189 converts each output current (DAC1 and
DAC2) into an output voltage (VOUT1, VOUT2) with two
internal, ground-referenced 400
load resistors. Using
the internal 1.2V reference voltage, the MAX5189’s inte-
grated reference output-current resistor (RSET = 9.6k
)
sets IREF to 125A and IFS to 1mA.
External Reference
To disable the MAX5186/MAX5189’s internal reference,
connect REN to DVDD. A temperature-stable, external
reference may now be applied to drive the REFO pin to
set the full-scale output (Figure 3). Choose a reference
capable of supplying at least 150A to drive the bias
circuit that generates the cascode current for the cur-
rent array. For improved accuracy and drift perfor-
mance, choose a fixed output voltage reference such
as the 1.2V, 25ppm/°C MAX6520 bandgap reference.
Standby Mode
To enter the lower power standby mode, connect digi-
tal inputs PD and DACEN to DGND. In standby, both
the reference and the control amplifier are active with
the current array inactive. To exit this condition, DACEN
must be pulled high with PD held at DGND. Both the
MAX5186/MAX5189 typically require 50s to wake up
and let both outputs and reference settle.
Shutdown Mode
For lowest power consumption, the MAX5186/MAX5189
provide a power-down mode in which the reference,
control amplifier, and current array are inactive and the
DACs’ supply current is reduced to 1A. To enter this
mode, connect PD to DVDD. To return to active mode,
connect PD to DGND and DACEN to DVDD. About 50s
are required for the parts to leave shutdown mode and
settle to their outputs’ values prior to shutdown. Table 1
lists the power-down mode selection.
Timing Information
The MAX5186/MAX5189 dual DACs write to their out-
puts simultaneously (Figure 4). On the falling edge of
the clock, the input data for DAC2 is preloaded into a
latch. On the rising edge of the clock, input data for
DAC1 is loaded to the DAC1 register, and the pre-
loaded DAC2 data in the latch is loaded to the DAC2
register.
Outputs
The MAX5186 outputs are designed to supply full-scale
output currents of 1mA into 400
loads in parallel with
a capacitive load of 5pF. The MAX5189 features inte-
grated 400
resistors that restore the array currents to
proportional, differential voltages of 400mV. These dif-
ferential output voltages can then be used to drive a
balun transformer or a low-distortion, high-speed oper-
ational amplifier to convert the differential voltage into a
single-ended voltage.
相关PDF资料 |
PDF描述 |
|---|---|
| VE-BN2-MU-F1 | CONVERTER MOD DC/DC 15V 200W |
| MAX5188BEEI+T | IC DAC 8BIT DUAL 40MHZ 28-QSOP |
| MAX5109EEE+T | IC DAC 8BIT DUAL NV 16-QSOP |
| VE-BN1-MU-F3 | CONVERTER MOD DC/DC 12V 200W |
| AD829AQ | IC VIDEO OPAMP HS LN 8-CDIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX518ACPA | 功能描述:数模转换器- DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| MAX518ACPA+ | 功能描述:数模转换器- DAC 8-Bit 2Ch Precision DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| MAX518ACSA | 功能描述:数模转换器- DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| MAX518ACSA+ | 功能描述:数模转换器- DAC 8-Bit 2Ch Precision DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| MAX518ACSA+T | 功能描述:数模转换器- DAC 8-Bit 2Ch Precision DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。