参数资料
型号: MAX5387NAUD+
厂商: Maxim Integrated Products
文件页数: 2/15页
文件大小: 0K
描述: IC POT DGTL 256-TAP 14TSSOP
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 96
接片: 256
电阻(欧姆): 100k
电路数: 2
温度系数: 标准值 35 ppm/°C
存储器类型: 易失
接口: I²C(设备位址)
电源电压: 2.6 V ~ 5.5 V
工作温度: -40°C ~ 125°C
安装类型: 表面贴装
封装/外壳: 14-TSSOP(0.173",4.40mm 宽)
供应商设备封装: 14-TSSOP
包装: 管件
Dual, 256-Tap, Volatile, Low-Voltage
Linear Taper Digital Potentiometer
MAX5387
10 _____________________________________________________________________________________
Figure 3. START and STOP Conditions
Figure 4. Bit Transfer
Figure 5. Acknowledge
Bit Transfer
One data bit is transferred during each clock pulse. The
data on the SDA line must remain stable while SCL is
high. See Figure 4.
Acknowledge
The acknowledge bit is a clocked 9th bit that the recipi-
ent uses to handshake receipt of each byte of data. See
Figure 5. Each byte transferred requires a total of nine
bits. The master controller generates the 9th clock pulse,
and the recipient pulls down SDA during the acknowl-
edge clock pulse, so the SDA line remains stable low
during the high period of the clock pulse.
Slave Address
The MAX5387 includes a 7-bit slave address (Figure 6).
The 8th bit following the 7th bit of the slave address is the
NOP/W bit. Set the NOP/W bit low for a write command
and high for a no-operation command. The device does
not support readback.
The device provides three address inputs (A0, A1, and
A2), allowing up to eight devices to share a common
bus (Table 1). The first 4 bits (MSBs) of the factory-set
slave addresses are always 0101. A2, A1, and A0 set the
next 3 bits of the slave address. Connect each address
input to VDD or GND. Each device must have a unique
address to share a common bus.
P
STOP
CONDITION
S
START CONDITION
SDA
SCL
SDA
SCL
DATA STABLE,
DATA VALID
CHANGE OF
DATA ALLOWED
9
8
2
1
START
CONDITION
SCL
SDA
CLOCK PULSE FOR
ACKNOWLEDGMENT
NOT ACKNOWLEDGE
ACKNOWLEDGE
相关PDF资料
PDF描述
MAX5389NAUD+T IC DGTL POT 256POS 100K 14TSSOP
MAX5392NAUE+T IC DGTL POT 256POS 100K 16TSSOP
MAX5393NAUD+T IC POT DGTL DUAL 256TAP 14TSSOP
MAX5394NATA+T IC DGTL POT 256POS 100KOHM 8TDFN
MAX5395NATA+T IC DGTL POT 256POS 100KOHM 8TDFN
相关代理商/技术参数
参数描述
MAX5387NAUD+ 功能描述:数字电位计 IC Dl 256-Tap Volatile Linear Taper RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel
MAX5387NAUD+T 功能描述:数字电位计 IC Dl 256-Tap Volatile Linear Taper RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel
MAX5388EVKIT+ 功能描述:数字电位计 IC Dual 256-Tap Volatile Low-Voltage Linear Taper Digital Potentiometers RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel
MAX5388EVMINIQU+ 功能描述:数字电位计开发工具 MAX5386/88/91/93 Eval Kit RoHS:否 制造商:Arduino 产品:TinkerKit Rotary Potentiometers 工具用于评估:TinkerKit 电阻:4.7 kOhms 工作电源电压:0 V to 5 V
MAX5388LAUB+ 功能描述:数字电位计 IC Dl 256-Tap Volatile Linear Taper RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel