- 您现在的位置：买卖IC网 > PDF目录1944 > MAX5394NATA+T (Maxim Integrated Products)IC DGTL POT 256POS 100KOHM 8TDFN PDF资料下载
参数资料
| 型号： | MAX5394NATA+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 5/15页 |
| 文件大小： | 0K |
| 描述： | IC DGTL POT 256POS 100KOHM 8TDFN |
| 标准包装： | 2,500 |
| 接片： | 256 |
| 电阻（欧姆）： | 100k |
| 电路数： | 1 |
| 温度系数： | 标准值 50 ppm/°C |
| 存储器类型： | 易失 |
| 接口： | 3 线 SPI（芯片选择） |
| 电源电压： | 1.7 V ~ 5.5 V |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | * |
| 封装/外壳： | * |
| 供应商设备封装： | * |
| 包装： | * |
MAX5394
Single, 256-Tap Volatile, SPI, Low-Voltage Linear
Taper Digital Potentiometer
13
Maxim Integrated
register to be written. A RST will also deassert shutdown
mode and return the wiper to midscale (0x80). This
command does not affect the charge-pump status.
SD_L_ZERO Command
Moves wiper to zero-scale position (0x00) and opens the
L terminal. The wiper register remains unaltered. Writes
cannot be made to the wiper register while shutdown
mode is engaged. Clearing shutdown mode will return
the wiper to the position contained in the wiper register
and close the L terminal. A RST will also deassert
shutdown mode and return the wiper to midscale (0x80).
This command does not affect the charge-pump status.
SD_L_MID Command
Moves wiper to midscale position (0x80) and opens the
L terminal. The wiper register remains unaltered. Writes
cannot be made to the wiper register while shutdown
mode is engaged. Clearing shutdown mode will return
the wiper to the position contained in the wiper register
and close the L terminal. A RST will also deassert
shutdown mode and return the wiper to midscale (0x80).
This command does not affect the charge-pump status.
SD_L_FULL Command
Moves wiper to full-scale position (0xFF) and opens the
L terminal. The wiper register remains unaltered. Writes
cannot be made to the wiper register while shutdown
mode is engaged. Clearing shutdown mode will return
the wiper to the position contained in the wiper register
and close the L terminal. A RST will also deassert
shutdown mode and return the wiper to midscale (0x80).
This command does not affect the charge-pump status.
SD_W Command
Opens the W terminal keeping the internal tap position
the same as the wiper register. Writes cannot be made
to the wiper registers while shutdown mode is engaged.
Clearing shutdown mode will return the wiper to the
position contained in the wiper register and close W
terminal. A RST will also deassert shutdown mode and
return the wiper to midscale (0x80). This command does
not affect the charge-pump status.
QP_ON Command
Enables the onboard charge pump to allow low-supply
voltage operation. This is the power-on default condition.
Low supply voltage is 1.7V.
QP_OFF Command
Disables the on-board charge pump and places device
in low power mode. Low supply voltage is limited to 2.6V.
RST Command
Returns device to power-on default conditions. Resets
the wiper register to midscale (0x80), enables charge
pump, and deasserts any shutdown modes.
相关PDF资料 |
PDF描述 |
|---|---|
| MAX5395NATA+T | IC DGTL POT 256POS 100KOHM 8TDFN |
| MAX5401EKA-T | IC DIGITAL POT 256-TAP SOT23-8 |
| MAX5402EUA | IC POT DIGITAL 256-TAP 8-UMAX |
| MAX5405EUB | IC POT DUAL DGTL 256TAP 10-UMAX |
| MAX5407EKA+T | IC POT DIG AUDIO 32TAP SOT23-8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX5395LATA+T | 功能描述:数字电位计 IC Sgl 256-tap Volatile DigiPot w/SPI RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
| MAX5395MATA+T | 功能描述:数字电位计 IC Sgl 256-tap Volatile DigiPot w/SPI RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
| MAX5395NATA+T | 功能描述:数字电位计 IC Sgl 256-tap Volatile DigiPot w/SPI RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
| MAX539ACPA | 功能描述:数模转换器- DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| MAX539ACPA+ | 功能描述:数模转换器- DAC 12-Bit Precision DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。