- 您现在的位置：买卖IC网 > PDF目录9188 > MAX5395LATA+T (Maxim Integrated Products)IC DGTL POT 256POS 10KOHM 8TDFN PDF资料下载
参数资料
| 型号： | MAX5395LATA+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 6/17页 |
| 文件大小： | 0K |
| 描述： | IC DGTL POT 256POS 10KOHM 8TDFN |
| 标准包装： | 2,500 |
| 接片： | 256 |
| 电阻（欧姆）： | 10k |
| 电路数： | 1 |
| 温度系数： | 标准值 50 ppm/°C |
| 存储器类型： | 易失 |
| 接口： | I²C |
| 电源电压： | 1.7 V ~ 5.5 V |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | * |
| 封装/外壳： | * |
| 供应商设备封装： | * |
| 包装： | * |
14
Maxim Integrated
MAX5395
Single, 256-Tap Volatile, I2C, Low-Voltage Linear
Taper Digital Potentiometer
WIPER Command
The data byte writes to the wiper register and the
potentiometer moves to the appropriate position. D[7:0]
indicates the position of the wiper. D[7:0] = 0x00 moves
the wiper to the position closest to L. D[7:0] = 0xFF
moves the wiper closest to H. D[7:0] = 0x80 following
power-on.
SD_CLR Command
Removes any existing shutdown condition. Connects
all potentiometer terminals and returns the wiper to the
value stored in the wiper register. The command does
not affect the current status of the charge pump.
SD_H_WREG Command
Opens the H terminal and maintains the wiper at the
wiper register location. Writes cannot be made to the
wiper register while shutdown mode is engaged. Clearing
shutdown mode will close the H terminal and allow the
wiper register to be written. A RST will also deassert
shutdown mode and return the wiper to midscale (0x80).
This command does not affect the charge-pump status.
SD_H_ZERO Command
Moves wiper to zero-scale position (0x00) and opens the
H terminal. The wiper register remains unaltered. Writes
cannot be made to the wiper register while shutdown
mode is engaged. Clearing shutdown mode will return
the wiper to the position contained in the wiper register
and close the H terminal. A RST will also deassert
shutdown mode and return the wiper to midscale (0x80).
This command does not affect the charge-pump status.
SD_H_MID Command
Moves wiper to midscale position (0x80) and opens the
H terminal. The wiper register remains unaltered. Writes
cannot be made to the wiper register while shutdown
mode is engaged. Clearing shutdown mode will return
the wiper to the position contained in the wiper register
and close the H terminal. A RST will also deassert
shutdown mode and return the wiper to midscale (0x80).
This command does not affect the charge-pump status.
SD_H_FULL Command
Moves wiper to full-scale position (0xFF) and opens the
H terminal. The wiper register remains unaltered. Writes
cannot be made to the wiper register while shutdown
mode is engaged. Clearing shutdown mode will return
the wiper to the position contained in the wiper register
and close the H terminal. A RST will also deassert
shutdown mode and return the wiper to midscale (0x80).
This command does not affect the charge-pump status.
Table 3. I2C Write Command Byte Summary
COMMAND
ADDRESS BYTE
COMMAND BYTE
DATA BYTE
S
A6 A5 A4 A3 A2 A1 A0 R/W
A
C7 C6 C5 C4 C3 C2 C1 C0
A
D7 D6 D5 D4 D3 D2 D1 D0
A P
WIPER
See Table 1
0
D7 D6 D5 D4 D3 D2 D1 D0
SD_CLR
0
1
0
Don’t Care
SD_H_WREG
0
1
0
1
0
SD_H_ZERO
0
1
0
1
0
1
SD_H_MID
0
1
0
1
0
1
0
SD_H_FULL
0
1
0
1
0
1
SD_L_WREG
0
1
0
1
0
SD_L_ZERO
0
1
0
1
0
1
SD_L_MID
0
1
0
1
0
1
0
SD_L_FULL
0
1
0
1
0
1
SD_W
0
1
0
1
X
QP_OFF
0
1
0
1
0
QP_ON
0
1
0
1
0
1
RST
0
1
0
相关PDF资料 |
PDF描述 |
|---|---|
| V24A48H300BL3 | CONVERTER MOD DC/DC 48V 300W |
| MS3450L28-9PY | CONN RCPT 12POS WALL MNT W/PINS |
| MS3450L28-9PX | CONN RCPT 12POS WALL MNT W/PINS |
| V24A48H300BL2 | CONVERTER MOD DC/DC 48V 300W |
| MAX5394MATA+T | IC DGTL POT 256POS 50KOHM 8TDFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX5395MATA+T | 功能描述:数字电位计 IC Sgl 256-tap Volatile DigiPot w/SPI RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
| MAX5395NATA+T | 功能描述:数字电位计 IC Sgl 256-tap Volatile DigiPot w/SPI RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
| MAX539ACPA | 功能描述:数模转换器- DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| MAX539ACPA+ | 功能描述:数模转换器- DAC 12-Bit Precision DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| MAX539ACSA | 功能描述:数模转换器- DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。