参数资料
型号: MAX5461EXT+T
厂商: Maxim Integrated Products
文件页数: 6/10页
文件大小: 0K
描述: IC POT DGTL 32-TAP 2WIRE SC70-6
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 1
系列: FleaPoT™
接片: 32
电阻(欧姆): 100k
电路数: 1
温度系数: 标准值 35 ppm/°C
存储器类型: 易失
接口: 2 线串行(芯片选择,增/减)
电源电压: 2.7 V ~ 5.5 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 6-TSSOP,SC-88,SOT-363
供应商设备封装: SC-70-6
包装: 标准包装
产品目录页面: 1399 (CN2011-ZH PDF)
其它名称: MAX5461EXT+TDKR
MAX5460–MAX5468
32-Tap FleaPoT, 2-Wire Digital
Potentiometers
_______________________________________________________________________________________
5
Detailed Description
The MAX5460–MAX5468 consist of a fixed resistor and a
wiper contact with 32-tap points that are digitally con-
trolled through a 2-wire serial interface. Three resistance
values are available: 10k (MAX5466/MAX5467/
MAX5468), 50k (MAX5463/MAX5464/MAX5465), and
100k (MAX5460/MAX5461/MAX5462).
The MAX5462/MAX5465/MAX5468 are designed to oper-
ate as potentiometers. In this configuration, the low termi-
nal of the resistor array is connected to ground (pin 2).
The MAX5461/MAX5464/MAX5467 perform as variable
resistors. In these devices, the wiper terminal and high
terminal of the resistor array are connected at pin 5.
The MAX5460/MAX5463/MAX5466 are similar variable
resistors, except the low terminal is connected to
ground (pin 2).
Digital Interface Operation
The MAX5460–MAX5468 have two modes of operation
when the serial interface is active: increment and
decrement mode. The serial interface is only active
when
CS is low.
The
CS and U/D inputs control the position of the wiper
along the resistor array. When
CS transitions from high to
low, the part will go into increment mode if U/
D is high,
and into decrement mode if U/
D is low. Once the mode is
set, the device will remain in that mode until
CS goes high
again. A low-to-high transition at the U/
D pin will incre-
ment or decrement the wiper position depending on the
current mode (Figures 1 and 2).
When the
CS input transitions to high (serial interface
inactive), the value of the counter is stored and the
wiper position is maintained.
Note that when the wiper reaches the maximum (or mini-
mum) tap position, the wiper will not wrap around to the
minimum (or maximum) position.
CS
U/D
W
NOTE: "W" IS NOT A DIGITAL SIGNAL. IT REPRESENTS WIPER TRANSITIONS.
tCU
tIL
tIH
tSETTLE
tIC
tCI
tSETTLE
Figure 1. Serial Interface Timing Diagram, Increment Mode
CS
U/D
W
tCU
tIL
tIH
tIC
tSETTLE
tCI
tSETTLE
NOTE: "W" IS NOT A DIGITAL SIGNAL. IT REPRESENTS WIPER TRANSITIONS.
Figure 2. Serial Interface Timing Diagram, Decrement Mode
相关PDF资料
PDF描述
MS3451W20-27S CONN RCPT 14POS CBL MNT W/SCKT
VI-224-MX-B1 CONVERTER MOD DC/DC 48V 75W
VI-224-MW CONVERTER MOD DC/DC 48V 100W
VE-J2Y-MZ CONVERTER MOD DC/DC 3.3V 16.5W
MS3451L20-27S CONN RCPT 14POS CBL MNT W/SCKT
相关代理商/技术参数
参数描述
MAX5462EXT 制造商:Maxim Integrated Products 功能描述:32-TAP FLEAPOT 2-WIRE DIGITAL POTEN - Cut Tape Product
MAX5462EXT+ 制造商:Maxim Integrated Products 功能描述:DGTL POTENTIOMETER 32POS 100KOHM SGL 6PIN SC-70 - Rail/Tube
MAX5462EXT+T 功能描述:数字电位计 IC 32-Tap FleaPoT 2Wire RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel
MAX5462EXT-T 功能描述:数字电位计 IC RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel
MAX5463EXK+ 制造商:Maxim Integrated Products 功能描述:DGTL POTENTIOMETER 32POS 50KOHM SGL 5PIN SC-70 - Rail/Tube