参数资料
型号: MAX5488ETE+T
厂商: Maxim Integrated Products
文件页数: 2/13页
文件大小: 0K
描述: IC POT DGTL DUAL 256-TAP 16-TQFN
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 2,500
接片: 256
电阻(欧姆): 50k
电路数: 2
温度系数: 标准值 35 ppm/°C
存储器类型: 非易失
接口: 3 线串行(芯片选择)
电源电压: 2.7 V ~ 5.25 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 16-WFQFN 裸露焊盘
供应商设备封装: 16-TQFN(3x3)
包装: 带卷 (TR)
MAX5487/MAX5488/MAX5489
Dual, 256-Tap, Nonvolatile, SPI-Interface,
Linear-Taper Digital Potentiometers
10
______________________________________________________________________________________
or both simultaneously, depending on the state of A1
and A0. Alternatively, the “write NV register” command
can be used to store the current position of the wiper to
the NV register.
Copy NV Register to Wiper Register (Command 11)
This command (C1, C0 = 11) restores the wiper position
to the previously stored position in the NV register. This
command may affect one potentiometer at a time, or both
simultaneously, depending on the state of A1 and A0.
Nonvolatile Memory
The internal EEPROM consists of a nonvolatile register
that retains the last stored value prior to power-down.
The nonvolatile register is programmed to midscale at
the factory. The nonvolatile memory is guaranteed for
200,000 wiper write cycles and 50 years for wiper data
retention.
Power-Up
Upon power-up, the MAX5487/MAX5488/MAX5489
load the data stored in the nonvolatile wiper register
into the volatile memory register, updating the wiper
position with the data stored in the nonvolatile wiper
register. This initialization period takes 5s.
Standby
The MAX5487/MAX5488/MAX5489 feature a low-power
standby mode. When the device is not being pro-
grammed, it enters into standby mode and supply cur-
rent drops to 0.5A (typ).
Applications Information
The MAX5487/MAX5488/MAX5489 are ideal for circuits
requiring digitally controlled adjustable resistance,
such as LCD contrast control (where voltage biasing
adjusts the display contrast), or for programmable fil-
ters with adjustable gain and/or cutoff frequency.
Positive LCD Bias Control
Figures 4 and 5 show an application where the
MAX5487/MAX5488/MAX5489 provide an adjustable,
positive LCD-bias voltage. The op amp provides buffer-
ing and gain to the resistor-divider network made by
the potentiometer (Figure 4) or by a fixed resistor and a
variable resistor (Figure 5).
Programmable Filter
Figure 6 shows the MAX5487/MAX5488/MAX5489 in a
1st-order programmable-filter application. Adjust the gain
of the filter with R2, and set the cutoff frequency with R3.
Figure 3. Digital-Interface Format
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
SCLK
C1
C0
D7
D6
D5
D4
D3
D2
D1
D0
A1
A0
8
7
6
5
4
3
2
1
C1
C0
A1
A0
DIN
SCLK
CS
B) 8-BIT COMMAND WORD
A) 16-BIT COMMAND/DATA WORD
CS
DIN
相关PDF资料
PDF描述
VE-2WV-MY-F2 CONVERTER MOD DC/DC 5.8V 50W
VE-2WV-MY-F1 CONVERTER MOD DC/DC 5.8V 50W
VE-2WT-MY-F3 CONVERTER MOD DC/DC 6.5V 50W
MAX5489ETE+T IC POT DGTL DUAL 256-TAP 16-TQFN
MAX5477ETE+T IC DGTL POT DUAL 256TAP 16-TQFN
相关代理商/技术参数
参数描述
MAX5488EUD 制造商:Maxim Integrated Products 功能描述:DUAL, 256-TAP, NONVOLATILE, SPI-INTERFACE, LI - Rail/Tube
MAX5488EUD+ 功能描述:数字电位计 IC Dual 256-Tap NV SPI-Interface RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel
MAX5488EUD+T 功能描述:数字电位计 IC Dual 256-Tap NV SPI-Interface RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel
MAX5488EUD-T 制造商:Maxim Integrated Products 功能描述:DUAL, 256-TAP, NONVOLATILE, SPI-INTERFACE, LI - Tape and Reel
MAX5488EVKIT# 功能描述:数字电位计 IC RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel