- 您现在的位置：买卖IC网 > PDF目录2011 > MAX5885EGM+D (Maxim Integrated Products)IC DAC 16BIT 3.3V 200MSPS 48-QFN PDF资料下载
参数资料
| 型号： | MAX5885EGM+D |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 18/18页 |
| 文件大小： | 0K |
| 描述： | IC DAC 16BIT 3.3V 200MSPS 48-QFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 43 |
| 设置时间： | 11ns |
| 位数： | 16 |
| 数据接口： | 并联 |
| 转换器数目： | 1 |
| 电压电源： | 模拟和数字 |
| 功率耗散（最大）： | 135mW |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 48-QFN 裸露焊盘 |
| 供应商设备封装： | 48-QFN-EP（7x7） |
| 包装： | 管件 |
| 输出数目和类型： | 2 电流，单极 |
| 采样率（每秒）： | 200M |
| 产品目录页面： | 1398 (CN2011-ZH PDF) |
MAX5885
3.3V, 16-Bit, 200Msps High Dynamic
Performance DAC with CMOS Inputs
_______________________________________________________________________________________
9
Detailed Description
Architecture
The MAX5885 is a high-performance, 16-bit, current-
steering DAC (Figure 1) capable of operating with
clock speeds up to 200MHz. The converter consists of
separate input and DAC registers, followed by a cur-
rent-steering circuit. This circuit is capable of generat-
ing differential full-scale currents in the range of 2mA to
20mA. An internal current-switching network in combi-
nation with external 50
termination resistors convert
the differential output currents into a differential output
voltage with a peak-to-peak output voltage range of
0.1V to 1V. An integrated 1.2V bandgap reference,
control amplifier, and user-selectable external resistor
determine the data converter’s full-scale output range.
Reference Architecture and Operation
The MAX5885 supports operation with the on-chip 1.2V
bandgap reference or an external reference voltage
source. REFIO serves as the input for an external, low-
impedance reference source, and as the output if the
DAC is operating with the internal reference. For stable
operation with the internal reference, REFIO should be
decoupled to AGND with a 0.1F capacitor. Due to its
limited output drive capability, REFIO must be buffered
with an external amplifier, if heavier loading is required.
The MAX5885’s reference circuit (Figure 2) employs a
control amplifier, designed to regulate the full-scale
current IOUT for the differential current outputs of the
DAC. Configured as a voltage-to-current amplifier, the
output current can be calculated as follows:
IOUT = 32 IREFIO - 1 LSB
IOUT = 32 IREFIO - (IOUT / 2
16)
where IREFIO is the reference output current (IREFIO =
VREFIO/RSET) and IOUT is the full-scale output current
of the DAC. Located between FSADJ and DACREF,
RSET is the reference resistor, which determines the
amplifier’s output current for the DAC. See Table 1 for a
matrix of different IOUT and RSET selections.
Analog Outputs (IOUTP, IOUTN)
The MAX5885 outputs two complementary currents
(IOUTP, IOUTN) that can be operated in a single-
ended or differential configuration. A load resistor can
convert these two output currents into complementary
single-ended output voltages. The differential voltage
existing between IOUTP and IOUTN can also be con-
verted to a single-ended voltage using a transformer or
a differential amplifier configuration. If no transformer is
used, the output should have a 50
termination to the
analog ground and a 50
resistor between the outputs.
0.1
F
1.2V
REFERENCE
10k
IREF
RSET
DACREF
FSADJ
REFIO
IREF = VREFIO/RSET
CURRENT-STEERING
DAC
AVDD
IOUTP
IOUTN
Figure 2. Reference Architecture, Internal Reference
Configuration
RSET (k
)
FULL-SCALE CURRENT
IOUT (mA)
REFERENCE CURRENT
IREF (A)
CALCULATED
1% EIA STD
OUTPUT VOLTAGE
VIOUTP/N* (mVP-P)
2
62.5
19.2
19.1
100
5
156.26
7.68
7.5
250
10
312.5
3.84
3.83
500
15
468.75
2.56
2.55
750
20
625
1.92
1.91
1000
Table 1. IOUT and RSET Selection Matrix Based on a Typical 1.200V Reference Voltage
*Terminated into a 50
load.
相关PDF资料 |
PDF描述 |
|---|---|
| MAX5886EGK+D | IC DAC 12BIT 3.3V 500MSPS 68-QFN |
| MAX5887EGK+D | IC DAC 14BIT 3.3V 500MSPS 68-QFN |
| MAX5888EGK+D | IC DAC 16BIT 3.3V 500MSPS 68-QFN |
| MAX5889EGK+D | IC DAC 12BIT LVDS 600MSPS 68-QFN |
| MAX5890EGK+D | IC DAC 14BIT LVDS 600MSPS 68-QFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX5885EGM-T | 制造商:Maxim Integrated Products 功能描述:3.3V, 16-BIT, 200MSPS HIGH DYNAMIC PERFORMAN - Tape and Reel |
| MAX5885EGM-TD | 功能描述:数模转换器- DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| MAX5885EVKIT | 功能描述:数模转换器- DAC Evaluation Kit for the MAX5883 MAX5884 MAX5885 RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| MAX5886EGK | 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述: |
| MAX5886EGK+D | 功能描述:数模转换器- DAC 12-Bit 500Msps DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。