- 您现在的位置：买卖IC网 > PDF目录13346 > MAX6338IUB+ (Maxim Integrated Products)IC MONITOR VOLT QUAD 10-UMAX PDF资料下载
参数资料
| 型号： | MAX6338IUB+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 4/8页 |
| 文件大小： | 0K |
| 描述： | IC MONITOR VOLT QUAD 10-UMAX |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 50 |
| 类型： | 多压监控器 |
| 监视电压数目： | 4 |
| 输出： | 开路漏极或开路集电极 |
| 复位： | 低有效 |
| 复位超时： | 最小 <1 ms |
| 电压 - 阀值： | 1.58V，2.19V，2.93V，4.38V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-TFSOP，10-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 10-µMAX |
| 包装： | 管件 |
Quad Voltage Monitor in μMAX Package
Pin Description
PIN
1
2
3
4
5
6
7
8
9
10
NAME
IN1
IN2
IN3
IN4
GND
OUT4
OUT3
OUT2
OUT1
V CC
FUNCTION
Input Voltage 1. See the Selector Guide for monitored voltages.
Input Voltage 2. See the Selector Guide for monitored voltages.
Input Voltage 3. See the Selector Guide for monitored voltages.
Input Voltage 4. See the Selector Guide for monitored voltages.
Ground
Output 4. OUT4 goes low when V IN4 falls below its absolute threshold. OUT4 is open drain with a 10μA
internal pullup to V CC .
Output 3. OUT3 goes low when V IN3 falls below its absolute threshold. OUT3 is open drain with a 10μA
internal pullup to V CC .
Output 2. OUT2 goes low when V IN2 falls below its absolute threshold. OUT2 is open drain with a 10μA
internal pullup to V CC .
Output 1. OUT1 goes low when V IN1 falls below its absolute threshold. OUT1 is open drain with a 10μA
internal pullup to V CC .
Power Supply. Connect V CC to a +2.5V to +5.5V supply. An undervoltage lockout circuit forces all OUT_
pins low when V CC drops below 2.5V.
_______________Detailed Description
The MAX6338 is a low-power (25μA), quad voltage
monitor designed for multivoltage systems. Preset volt-
age options for +5.0V, +3.3V, +3.0V, +2.5V, +1.8V, and
-5.0V make these quad monitors ideal for applications
such as telecommunications, desktop and notebook
computers, high-end printers, data storage equipment,
and networking equipment.
The MAX6338 has an internally trimmed threshold that
minimizes or eliminates the need for external compo-
nents. The four open-drain outputs have weak (10μA)
internal pullups to V CC , allowing them to interface easily
with other logic devices. The MAX6338 can monitor
power supplies with either 5% or 10% tolerance specifi-
cations, depending on the selected version. An addi-
tional high-input-impedance comparator option can be
used as an adjustable voltage monitor, general-pur-
pose comparator, or digital level translator.
The weak internal pullups can be overdriven by external
pullups to any voltage from 0 to +5.5V. Internal circuitry
prevents current flow from the external pullup voltage to
V CC . The outputs can be wire-ORed for a single “power
good” signal.
The MAX6338 has either one or two auxiliary inputs and
two or three factory-programmed threshold voltages, or
four fixed voltages. The inverting input of all compara-
tors is connected to a 1.23V bandgap reference for all
positive voltages. The noninverting terminals are acces-
sible through internal resistive voltage-dividers with
preset factory threshold voltages. In the case of auxil-
iary (AUX) input, the positive terminal of the comparator
is accessible directly for setting the threshold for the
monitored voltage.
When any of the inputs (IN1–IN4) are higher than the
threshold level, the output is high. The output goes low
as the input drops below the threshold voltage monitor.
The undervoltage lockout circuitry remains active and
the outputs remain low with V CC down to 1V (Figure 1).
Applications Information
Hysteresis
When the voltage on one comparator input is at or near
the voltage on the other input, ambient noise generally
causes the comparator output to oscillate. The most
common way to eliminate this problem is through hys-
teresis. When the two comparator input voltages are
equal, hysteresis causes one comparator input voltage
to move quickly past the other, thus taking the input out
of the region where oscillation occurs. Standard com-
parators require hysteresis to be added through the
use of external resistors. The external resistive network
usually provides a positive feedback to the input in
order to cause a jump in the threshold voltage when
4
_______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| 100YXH180MEFCGC18X16 | CAP ALUM 180UF 100V 20% RADIAL |
| MAX6338MUB+ | IC MONITOR VOLT QUAD 10-UMAX |
| MAX6709GUB+ | IC VOLT MONITOR QUAD 10-UMAX |
| 400PX47MEFCGC16X25 | CAP ALUM 47UF 400V 20% RADIAL |
| XC6201P502PR-G | IC REG LDO 5V .2A SOT-89 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX6338IUB+ | 功能描述:监控电路 Quad Voltage Monitor w/4 Outputs RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
| MAX6338IUB+T | 功能描述:监控电路 Quad Voltage Monitor w/4 Outputs RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
| MAX6338IUB-T | 功能描述:监控电路 RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
| MAX6338JUB | 功能描述:监控电路 Integrated Circuits (ICs) RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
| MAX6338JUB+ | 功能描述:监控电路 Quad Voltage Monitor w/4 Outputs RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。