- 您现在的位置：买卖IC网 > PDF目录19821 > MAX6349THUT+T (Maxim Integrated)IC REG LDO 3.3V/ADJ .15A SOT23-6 PDF资料下载
参数资料
| 型号： | MAX6349THUT+T |
| 厂商： | Maxim Integrated |
| 文件页数： | 7/11页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO 3.3V/ADJ .15A SOT23-6 |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 稳压器拓扑结构： | 正，固定式或可调式 |
| 输出电压： | 3.3V，1.23 V ~ 5 V |
| 输入电压： | 2.5 V ~ 5.5 V |
| 电压 - 压降（标准）： | 0.3V @ 150mA |
| 稳压器数量： | 1 |
| 电流 - 输出： | 150mA（最小） |
| 工作温度： | 0°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SOT-23-6 |
| 供应商设备封装： | SOT-6 |
| 包装： | 带卷 (TR) |
150mA, SOT23, Low Dropout Linear Regulators
with Internal Microprocessor Reset Circuit
THERMAL SENSOR
IN
SHDN
REVERSE
LEAKAGE
PROTECTION
1.23V
ERROR
AMP
FEEDBACK MODE
COMPARATOR
MOS DRIVER WITH
CURRENT LIMIT
60mV
OUT
SET
Figure 2. Functional Diagram
GND
RESET
COMPARATOR
200ms
RESET
DELAY
MR
OUTPUT
STAGE
RESET/RESET
5% reset: Reset does not assert until the regulator out-
put voltage is at least -5% out of tolerance and always
asserts before the regulator output voltage is -10% out of
tolerance.
10% reset: Reset does not assert until the regulator
output voltage is at least -10% out of tolerance and
always asserts before the regulator output voltage is
-15% out of tolerance.
Reset Output
A μP ’ s reset input starts the μP in a known state. The
MAX6329/MAX6349 μP supervisory circuits assert a
reset during power-up, power-down, and brownout
conditions. Reset is guaranteed to be logic high or low
depending on the device chosen (see Selector Guide ).
RESET or RESET asserts when V OUT is below the reset
threshold and for at least 100ms (t RP ) after V OUT rises
above the reset threshold. RESET or RESET also
asserts when MR is low (MAX6349).
Shutdown (MAX6329 Only)
SHDN allows for the regulator to shutdown thereby
reducing the total I IN consumption of the device. The
MAX6329 provides a digitally controlled active-low
shutdown function. In shutdown mode the pass transis-
tor, control circuit, reference, and all biases turn off,
reducing the supply current to below 1μA. Connect
SHDN to IN for normal operation.
Manual Reset Input (MAX6349 Only)
Many μP-based products require manual reset capabil-
ity, allowing the operator, a test technician, or external
logic circuitry to initiate a reset. For the MAX6349, a
_______________________________________________________________________________________
7
相关PDF资料 |
PDF描述 |
|---|---|
| MAX6349WLUT+T | IC REG LDO 1.8V/ADJ .15A SOT23-6 |
| ATF750C-10SU | IC PLD HS 750 GATE 5.0V 24-SOIC |
| GCM31A7U2J221JX01D | CAP CER 220PF 630V 5% U2J 1206 |
| CWR09NC104KB | CAP TANT 0.1UF 50V 10% 1005 |
| VE-JT1-CW-B1 | CONVERTER MOD DC/DC 12V 100W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX6349TL | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:150mA, SOT23, Low-Dropout Linear Regulators with Internal Microprocessor Reset Circuit |
| MAX6349TLUT | 制造商:Maxim Integrated Products 功能描述:150MA SOT23 LOW-DROPOUT LINEAR RE - Rail/Tube |
| MAX6349TLUT+ | 制造商:Maxim Integrated Products 功能描述:REG LDO LIN ADJ/FIX POS 1.23V TO 5V/3.3V 0.15A 6PIN SOT-23 - Rail/Tube |
| MAX6349TLUT+T | 功能描述:低压差稳压器 - LDO 150mA LOD w/Int MPU Reset Circuit RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| MAX6349TLUT-T | 功能描述:低压差稳压器 - LDO RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
发布紧急采购，3分钟左右您将得到回复。