参数资料
型号: MAX6652AUB+
厂商: MAXIM INTEGRATED PRODUCTS INC
元件分类: 电源管理
英文描述: Temperature Sensor and System Monitor in a 10-Pin µMAX
中文描述: 4-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO10
封装: MICRO MAX PACKAGE-10
文件页数: 2/12页
文件大小: 165K
代理商: MAX6652AUB+
MAX6652
Temperature Sensor and System Monitor
in a 10-Pin MAX
10
______________________________________________________________________________________
Bit 6 is reserved.Bit 7 resets all register values to their
power-up default values. To reset all registers, set bit 7
to 1. This will also reset bit 7 to its power-up value of 0.
Applications Information
Sensing Circuit Board and Component
Temperatures
Temperature sensor ICs like the MAX6652 that sense
their own die temperatures must be mounted on or
close to the object whose temperature they are intend-
ed to measure. Because there is a good thermal path
between the 10-pin MAX package’s metal leads and
the IC die, the MAX6652 can accurately measure the
temperature of the circuit board to which it is soldered.
If the sensor is intended to measure the temperature of
a heat-generating component on the circuit board, it
should be mounted as close as possible to that compo-
nent and should share supply and ground traces (if
they are not noisy) with that component where possible.
This will maximize the heat transfer from the component
to the sensor.
The thermal path between the plastic package and the
die is not as good as the path through the leads, so the
MAX6652, like all temperature sensors in plastic pack-
ages, will be less sensitive to the temperature of the
surrounding air than to the temperature of the leads.
As with any IC, the wiring and circuits must be kept
insulated and dry to avoid leakage and corrosion,
especially if the part will be operated at cold tempera-
tures where condensation can occur.
Chip Information
TRANSISTOR COUNT: 13,446
PROCESS: BiCMOS
INTERRUPT
STATUS READ
THOT
THYST
TEMPERATURE
MONITORING CYCLE
DEFAULT MODE
ONE-TIME
INTERRUPT MODE
COMPARATOR MODE
ALERT
Figure 1. Alert Response to Temperature Interrupts
Table 7. Temperature Configuration Register
BIT
NAME
R/W
DESCRIPTION
0-1
Hot Temperature Interrupt
Mode Select
R/W
Bit 1, Bit 0
00: Default Mode
Bit 1, Bit 0
01: One-Time Interrupt Mode
Bit 1, Bit 0
10: Comparator Mode
Bit 1, Bit 0
11: Default Mode
2-7
Reserved
R/W
相关PDF资料
PDF描述
MAX6652AUB+T Temperature Sensor and System Monitor in a 10-Pin µMAX
MAX6654MEE+ 1°C Accurate Remote/Local Temperature Sensor with SMBus Serial Interface
MAX6654YMEE+ 1°C Accurate Remote/Local Temperature Sensor with SMBus Serial Interface
MAX6655MEE+ Dual Remote/Local Temperature Sensors and Four-Channel Voltage Monitors
MAX6655MEE+T Dual Remote/Local Temperature Sensors and Four-Channel Voltage Monitors
相关代理商/技术参数
参数描述
MAX6652AUB+ 功能描述:板上安装温度传感器 Temperature Sensor & System Monitor RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor
MAX6652AUB+T 功能描述:板上安装温度传感器 Temperature Sensor & System Monitor RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor
MAX6652AUB-T 功能描述:板上安装温度传感器 RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor
MAX6652EUB 制造商:Maxim Integrated Products 功能描述:- Rail/Tube
MAX6653AEE 功能描述:板上安装温度传感器 RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor