- 您现在的位置：买卖IC网 > PDF目录13617 > MAX6732AUTVDD1+T (Maxim Integrated Products)IC SUPERVISOR MPU W/WD SOT23-6 PDF资料下载
参数资料
| 型号： | MAX6732AUTVDD1+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 10/16页 |
| 文件大小： | 0K |
| 描述： | IC SUPERVISOR MPU W/WD SOT23-6 |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 类型： | 多压监控器 |
| 监视电压数目： | 2 |
| 输出： | 开路漏极或开路集电极 |
| 复位： | 低有效 |
| 复位超时： | 最小为 1.1 ms |
| 电压 - 阀值： | 0.788V，1.575V |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SOT-23-6 |
| 供应商设备封装： | SOT-6 |
| 包装： | 带卷 (TR) |
Single-/Dual-/Triple-Voltage μP Supervisory
Circuits with Independent Watchdog Output
The RSTIN comparator derives power from V CC 1, and
the input voltage must remain less than or equal to
V CC 1. Low leakage current at RSTIN allows the use of
large-valued resistors, resulting in reduced power con-
sumption of the system.
Watchdog
The watchdog feature monitors μP activity through
the watchdog input (WDI). A rising or falling edge on
WDI within the watchdog timeout period (t WD ) indi-
cates normal μP operation. WDO asserts low if WDI
remains high or low for longer than the watchdog
timeout period. Floating WDI does not disable the
watchdog timer.
The MAX6730A –MAX6735A include a dual-mode
watchdog timer to monitor μP activity. The flexible time-
out architecture provides a long-period initial watchdog
mode, allowing complicated systems to complete
lengthy boots, and a short-period normal watchdog
mode, allowing the supervisor to provide quick alerts
when processor activity fails. After each reset event
(V CC power-up, brownout, or manual reset), there is a
long initial watchdog period of 35s (min). The long
watchdog period mode provides an extended time for
the system to power up and fully initialize all μP and
system components before assuming responsibility for
routine watchdog updates.
The usual watchdog timeout period (1.12s min) begins
after the initial watchdog timeout period (t WD-L ) expires
or after the first transition on WDI (Figure 3). During nor-
mal operating mode, the supervisor asserts the WDO
output if the μP does not update the WDI with a valid
transition (high to low or low to high) within the standard
timeout period (t WD-S ) (1.12s min).
Connect MR to WDO to force a system reset in the
event that no rising or falling edge is detected at WDI
within the watchdog timeout period. WDO asserts low
when no edge is detected by WDI, the RST output
asserts low, the watchdog counter immediately clears,
and WDO returns high. The watchdog counter restarts,
using the long watchdog period, when the reset timeout
period ends (Figure 4).
Ensuring a Valid Reset
Output Down to V CC = 0V
The MAX6730A–MAX6735A guarantee proper opera-
tion down to V CC = +0.8V. In applications that require
valid reset levels down to V CC = 0V, use a 100k ? pull-
down resistor from RST to GND. The resistor value
used is not critical, but it must be large enough not to
load the reset output when V CC is above the reset
threshold. For most applications, 100k ? is adequate.
Note that this configuration does not work for the open-
drain outputs of MAX6730A/MAX6732A/MAX6734A.
V CC 1,
V CC 2
RSTIN
RST
WDO
V CC
(MIN)
V TH
t RP
WDI
<t WD-L
<t WD-S
<t WD-S
>t WD-S
<t WD-S
<t WD-S
t WD-S
Figure 3. Watchdog Input/Output Timing Diagram ( MR and WDO Not Connected)
10
______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| VI-23D-EX-F2 | CONVERTER MOD DC/DC 85V 75W |
| MAX6732AUTZWD6+T | IC SUPERVISOR MPU W/WD SOT23-6 |
| VI-23D-EX-F1 | CONVERTER MOD DC/DC 85V 75W |
| UWD1H100MCL1GS | CAP ALUM 10UF 50V 20% SMD |
| VI-23B-EX-F4 | CONVERTER MOD DC/DC 95V 75W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX6732AUTVDD2+T | 功能描述:监控电路 Dual uPower Supervisor RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
| MAX6732AUTVDD3+ | 制造商:Maxim Integrated Products 功能描述:VOLT SUPERVISOR PWR SUPPLY 1.575V/0.788V 6PIN SOT-23 - Rail/Tube |
| MAX6732AUTVDD3+T | 功能描述:监控电路 Dual uPower Supervisor RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
| MAX6732AUTVDD4+T | 功能描述:监控电路 Single-/Dual-/Triple-Voltage N
|
| MAX6732AUTVDD5+T | 功能描述:监控电路 Dual uPower Supervisor RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。