参数资料
型号: MAX6792TPWD3+
厂商: Maxim Integrated Products
文件页数: 1/24页
文件大小: 0K
描述: IC REG LIN W/SPR VSR 20-TQFN
其它有关文件: Automotive Product Guide
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 60
类型: 稳压器/监控器
监视电压数目: 2
输出: 推挽式,图腾柱
复位: 低有效
复位超时: 最小为 35 ms
电压 - 阀值: 1.665V,可调
工作温度: -40°C ~ 125°C
安装类型: 表面贴装
封装/外壳: 20-WQFN 裸露焊盘
供应商设备封装: 20-TQFN-EP(5x5)
包装: 管件
ATION
EVALU
AVAIL
19-3875; Rev 2; 10/11
KIT
ABLE
High-Voltage, Micropower, Single/Dual
Linear Regulators with Supervisory Functions
General Description
The MAX6791–MAX6796 ultra-low-quiescent-current,
single-/dual-output linear regulators are ideal for auto-
motive applications. The devices offer a wide 5V to 72V
operating input range, allowing them to withstand auto-
motive load-dump conditions while consuming only
68μA. The MAX6791–MAX6794 are dual-output regula-
tors capable of supplying up to 150mA per output. The
MAX6795/MAX6796 offer a single output capable of
delivering up to 300mA. These devices offer standard
output-voltage options (5V, 3.3V, 2.5V, or 1.8V) and can
be adjusted to any voltage from 1.8V to 11V. The
MAX6791–MAX6794 also offer a fixed 5V output.
All devices feature a push-pull or open-drain, active-low
RESET output with a fixed output reset threshold that is
92.5%/87.5% of the regulator output OUT/OUT1. The
reset output asserts low when OUT/OUT1 drops below
the reset threshold and remains low for the fixed or
capacitor-adjustable reset timeout period after
OUT/OUT1 exceeds the reset threshold.
The MAX6791–MAX6796 provide a watchdog input that
monitors a pulse train from the microprocessor (μP) and
generates reset pulses if the watchdog input remains
high or low for a duration longer than the watchdog
timeout period. All devices are available with either a
fixed watchdog timeout period of 280ms (min) or a peri-
od adjustable with an external capacitor. The
MAX6791/MAX6792 feature a windowed watchdog
Features
o Low 68 μ A Quiescent Current
o Wide 5V to 72V Supply Voltage Range
o Output Current
Single Output Up to 300mA
Dual Outputs Up to 150mA per Output
o Low Dropout Voltage
420mV (typ) at 100mA (Single)
840mV (typ) at 100mA (Dual)
o Fixed Output-Voltage Options: 5V, 3.3V, 2.5V,
1.8V, or Adjustable Output (from 1.8V to 11V)
o ENABLE and HOLD Functionality
o RESET Output: Open Drain or Push-Pull
o Internally Fixed (35 μ s, 3.125ms, 12.5ms, 50ms, or
200ms) or Capacitor-Adjustable Reset Timeout
Periods
o Internally Fixed or Capacitor-Adjustable
Watchdog Timeout Periods
o Windowed (Minimum/Maximum) Watchdog Timer
Options (MAX6791/MAX6792)
o Watchdog Disable Feature
o Thermal, Short-Circuit, and Output Overvoltage
Protection
o Fully Specified from -40°C to +125°C
o Small, Thermally Enhanced, 5mm x 5mm TQFN
Ordering Information
timeout period with selectable window ratio. The watch-
dog feature can be disabled.
The MAX6791–MAX6794 provide dual enable inputs
(ENABLE1 and ENABLE2) that control each regulator
independently. The single-output MAX6795/MAX6796
feature one enable input (ENABLE).
All devices include a hold input ( HOLD) that aids the
implementation of a self-holding circuit without requir-
PART
MAX6791 TP_D _+
MAX6792 TP_D _+
MAX6793 TP_ D_+
MAX6794 TP_ D_+
MAX6795 TP_ D_+
MAX6795TP_D _/V+
TEMP RANGE
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
PIN-PACKAGE
20 TQFN-EP*
20 TQFN-EP*
20 TQFN-EP*
20 TQFN-EP*
20 TQFN-EP*
20 TQFN-EP*
ing external components. Once the regulator is
enabled, setting HOLD low forces the regulator to
remain on even if ENABLE/ENABLE1 is subsequently
set low. Releasing HOLD shuts down the regulator.
The MAX6791–MAX6796 are available in a small, ther-
mally enhanced TQFN package. The 5mm x 5mm
package dissipates up to 2.7W, supporting continuous
regulator operation during high ambient temperatures,
high battery voltage, and high load-current conditions.
The MAX6791–MAX6796 are specified for a -40°C to
+125°C operating temperature range.
Applications
Automotive
MAX6795TPSD2/V+ -40°C to +125°C 20 TQFN-EP*
MAX6796 TP_D _+ -40°C to +125°C 20 TQFN-EP*
+Denotes lead-free package.
For tape-and-reel, add a T after the “+.” Tape-and-reel are
offered in 2.5k increments. The first placeholder “_” designates
preset output-voltage option and preset reset threshold level;
see Table 1. The second placeholder “_ ” designates the reset
timeout period; see Table 2. For example, the MAX6791TPSD3+
indicates a 3.3V output voltage with a reset threshold of 87.5%
at nominal voltage and a 50ms reset timeout period. Samples
are generally held in stock. Nonstandard versions require a 2.5k
minimum order quantity.
/V Denotes an automotive-qualified part.
*EP = Exposed pad.
Typical Application Circuit, Pin Configurations, and Selector
Guide appear at end of data sheet.
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
1
相关PDF资料
PDF描述
HMC10DRXS CONN EDGECARD 20POS DIP .100 SLD
HCC18DRXN CONN EDGECARD 36POS DIP .100 SLD
HBC18DRXI CONN EDGECARD 36POS DIP .100 SLD
HCC18DRXH CONN EDGECARD 36POS DIP .100 SLD
VI-2N4-EX-F1 CONVERTER MOD DC/DC 48V 75W
相关代理商/技术参数
参数描述
MAX6792TPWD3+ 功能描述:线性稳压器 - 标准 Dual uPower Linear RoHS:否 制造商:STMicroelectronics 输出类型: 极性: 输出电压:1.8 V 输出电流:150 mA 负载调节: 最大输入电压:5.5 V 线路调整率: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SOT-323-5L
MAX6792TPWD3+T 功能描述:线性稳压器 - 标准 Dual uPower Linear RoHS:否 制造商:STMicroelectronics 输出类型: 极性: 输出电压:1.8 V 输出电流:150 mA 负载调节: 最大输入电压:5.5 V 线路调整率: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SOT-323-5L
MAX6792TPWD4+ 功能描述:线性稳压器 - 标准 Dual uPower Linear RoHS:否 制造商:STMicroelectronics 输出类型: 极性: 输出电压:1.8 V 输出电流:150 mA 负载调节: 最大输入电压:5.5 V 线路调整率: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SOT-323-5L
MAX6792TPWD4+T 功能描述:线性稳压器 - 标准 Dual uPower Linear RoHS:否 制造商:STMicroelectronics 输出类型: 极性: 输出电压:1.8 V 输出电流:150 mA 负载调节: 最大输入电压:5.5 V 线路调整率: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SOT-323-5L
MAX6792TPYD0+ 功能描述:线性稳压器 - 标准 Dual uPower Linear RoHS:否 制造商:STMicroelectronics 输出类型: 极性: 输出电压:1.8 V 输出电流:150 mA 负载调节: 最大输入电压:5.5 V 线路调整率: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SOT-323-5L