- 您现在的位置：买卖IC网 > PDF目录14498 > MAX682ESA+ (Maxim Integrated Products)IC REG SWITCHED CAP 5V 8SOIC PDF资料下载
参数资料
| 型号： | MAX682ESA+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 6/12页 |
| 文件大小： | 0K |
| 描述： | IC REG SWITCHED CAP 5V 8SOIC |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 100 |
| 类型： | 切换式电容器（充电泵） |
| 输出类型： | 固定 |
| 输出数： | 1 |
| 输出电压： | 5V |
| 输入电压： | 2.7 V ~ 5.5 V |
| 频率 - 开关： | 200kHz，1MHz |
| 电流 - 输出： | 250mA |
| 同步整流器： | 无 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 包装： | 管件 |
| 供应商设备封装： | 8-SOIC |
| 产品目录页面： | 1409 (CN2011-ZH PDF) |
3.3V-Input to Regulated 5V-Output
Charge Pumps
Detailed Description
The MAX682/MAX683/MAX684 charge pumps provide
IN
S2
OUT
a regulated 5V output from a 2.7V to 5.5V input. They
deliver a maximum of 250mA, 100mA, or 50mA load
current, respectively. Designed specifically for com-
pact applications, a complete regulator circuit requires
only three small external capacitors and one resistor.
An externally adjustable switching frequency and inno-
vative control scheme allow the circuit to be optimized
for efficiency, size, or output noise. The devices also
contain a shutdown feature.
The MAX682/MAX683/MAX684 consist of an error
amplifier, a 1.23V bandgap reference, an internal resis-
tive feedback network, an oscillator, high-current MOS-
C IN
S1
C X
OSC
C OUT
FET switches, and shutdown and control logic (Figure
1). Figure 2 shows an idealized unregulated charge-
pump voltage doubler. The oscillator runs at a 50%
duty cycle. During one half of the period, the transfer
Figure 2. Unregulated Voltage Doubler
capacitor (C X ) charges to the input voltage. During the
IN
S2
OUT
other half, the doubler stacks the voltage across C X
and the input voltage, and transfers the sum of the two
voltages to the output filter capacitor (C OUT ). Rather
than simply doubling the input voltage, the
MAX682/MAX683/MAX684 provide a regulated fixed
S1
C X
output voltage (5V) using either skip mode or constant-
frequency mode. Skip mode and constant-frequency
mode are externally selected via the SKIP input pin.
C IN
EN
OSCILLATOR
OUT
IN
Figure 3. Skip-Mode Regulation
Skip Mode
SKIP
CONTROL
LOGIC
1.23V
In skip mode ( SKIP = low), the error amplifier disables
switching when it detects an output higher than 5V. The
device then skips switching cycles until the output volt-
age drops. Then the error amplifier reactivates the
SHDN
CXP
oscillator. Figure 3 illustrates the regulation scheme.
This regulation method minimizes operating current
SHDN
EN
OSC
SWITCHES
CXN
because the device does not switch continuously. SKIP
is a logic input and should not remain floating.
Constant-Frequency Mode
When SKIP is high, the charge pump runs continuously
Figure 1. Functional Block Diagram
PGND
at the selected frequency. Figure 4 shows a block dia-
gram of the device in constant-frequency mode. The
error amplifier controls the charge on C X by driving the
gate of the N-channel FET. When the output voltage
falls, the gate drive increases, resulting in a larger volt-
age across C X . This regulation scheme minimizes out-
put ripple. Since the device switches continuously, the
6
_______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| RSM12DRKI | CONN EDGECARD 24POS DIP .156 SLD |
| RBM25DCTS | CONN EDGECARD 50POS DIP .156 SLD |
| HSM11DSES | CONN EDGECARD 22POS .156 EYELET |
| HMM11DSES | CONN EDGECARD 22POS .156 EYELET |
| MAX631ACPA+ | IC REG BOOST 5V/ADJ 50MA 8DIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX682ESA+ | 功能描述:电荷泵 3.3VIn to Reg 5Vout Charge Pump RoHS:否 制造商:Maxim Integrated 功能:Inverting, Step Up 输出电压:- 1.5 V to - 5.5 V, 3 V to 11 V 输出电流:100 mA 电源电流:1 mA 最大工作温度:+ 70 C 封装 / 箱体:SOIC-8 Narrow 封装:Tube |
| MAX682ESA+T | 功能描述:电荷泵 3.3VIn to Reg 5Vout Charge Pump RoHS:否 制造商:Maxim Integrated 功能:Inverting, Step Up 输出电压:- 1.5 V to - 5.5 V, 3 V to 11 V 输出电流:100 mA 电源电流:1 mA 最大工作温度:+ 70 C 封装 / 箱体:SOIC-8 Narrow 封装:Tube |
| MAX682ESA-T | 功能描述:电荷泵 3.3VIn to Reg 5Vout Charge Pump RoHS:否 制造商:Maxim Integrated 功能:Inverting, Step Up 输出电压:- 1.5 V to - 5.5 V, 3 V to 11 V 输出电流:100 mA 电源电流:1 mA 最大工作温度:+ 70 C 封装 / 箱体:SOIC-8 Narrow 封装:Tube |
| MAX6830RDUT | 制造商:Maxim Integrated Products 功能描述:DUAL ULTRA LOW VOLTAGE SOT23 MICROP - Cut Tape Product |
| MAX6830RDUT+T | 功能描述:监控电路 RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。