参数资料
型号: MAX683EUA+
厂商: Maxim Integrated Products
文件页数: 6/12页
文件大小: 0K
描述: IC REG SWITCHED CAP 5V .1A 8UMAX
标准包装: 50
类型: 切换式电容器(充电泵)
输出类型: 固定
输出数: 1
输出电压: 5V
输入电压: 2.7 V ~ 5.5 V
频率 - 开关: 200kHz,1MHz
电流 - 输出: 100mA
同步整流器:
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 8-TSSOP,8-MSOP(0.118",3.00mm 宽)
包装: 管件
供应商设备封装: 8-uMAX
3.3V-Input to Regulated 5V-Output
Charge Pumps
Detailed Description
The MAX682/MAX683/MAX684 charge pumps provide
IN
S2
OUT
a regulated 5V output from a 2.7V to 5.5V input. They
deliver a maximum of 250mA, 100mA, or 50mA load
current, respectively. Designed specifically for com-
pact applications, a complete regulator circuit requires
only three small external capacitors and one resistor.
An externally adjustable switching frequency and inno-
vative control scheme allow the circuit to be optimized
for efficiency, size, or output noise. The devices also
contain a shutdown feature.
The MAX682/MAX683/MAX684 consist of an error
amplifier, a 1.23V bandgap reference, an internal resis-
tive feedback network, an oscillator, high-current MOS-
C IN
S1
C X
OSC
C OUT
FET switches, and shutdown and control logic (Figure
1). Figure 2 shows an idealized unregulated charge-
pump voltage doubler. The oscillator runs at a 50%
duty cycle. During one half of the period, the transfer
Figure 2. Unregulated Voltage Doubler
capacitor (C X ) charges to the input voltage. During the
IN
S2
OUT
other half, the doubler stacks the voltage across C X
and the input voltage, and transfers the sum of the two
voltages to the output filter capacitor (C OUT ). Rather
than simply doubling the input voltage, the
MAX682/MAX683/MAX684 provide a regulated fixed
S1
C X
output voltage (5V) using either skip mode or constant-
frequency mode. Skip mode and constant-frequency
mode are externally selected via the SKIP input pin.
C IN
EN
OSCILLATOR
OUT
IN
Figure 3. Skip-Mode Regulation
Skip Mode
SKIP
CONTROL
LOGIC
1.23V
In skip mode ( SKIP = low), the error amplifier disables
switching when it detects an output higher than 5V. The
device then skips switching cycles until the output volt-
age drops. Then the error amplifier reactivates the
SHDN
CXP
oscillator. Figure 3 illustrates the regulation scheme.
This regulation method minimizes operating current
SHDN
EN
OSC
SWITCHES
CXN
because the device does not switch continuously. SKIP
is a logic input and should not remain floating.
Constant-Frequency Mode
When SKIP is high, the charge pump runs continuously
Figure 1. Functional Block Diagram
PGND
at the selected frequency. Figure 4 shows a block dia-
gram of the device in constant-frequency mode. The
error amplifier controls the charge on C X by driving the
gate of the N-channel FET. When the output voltage
falls, the gate drive increases, resulting in a larger volt-
age across C X . This regulation scheme minimizes out-
put ripple. Since the device switches continuously, the
6
_______________________________________________________________________________________
相关PDF资料
PDF描述
GCB75DHNN CONN EDGECARD 150PS .050 DIP SLD
RBC22DRAH-S734 CONN EDGECARD 44POS .100 R/A PCB
GCB75DHHN CONN EDGECARD 150PS .050 DIP SLD
VE-22J-EW-S CONVERTER MOD DC/DC 36V 100W
HCC15DRXS-S734 CONN EDGECARD 30POS DIP .100 SLD
相关代理商/技术参数
参数描述
MAX683EUA+ 功能描述:电荷泵 3.3VIn to Reg 5Vout Charge Pump RoHS:否 制造商:Maxim Integrated 功能:Inverting, Step Up 输出电压:- 1.5 V to - 5.5 V, 3 V to 11 V 输出电流:100 mA 电源电流:1 mA 最大工作温度:+ 70 C 封装 / 箱体:SOIC-8 Narrow 封装:Tube
MAX683EUA+T 功能描述:电荷泵 3.3VIn to Reg 5Vout Charge Pump RoHS:否 制造商:Maxim Integrated 功能:Inverting, Step Up 输出电压:- 1.5 V to - 5.5 V, 3 V to 11 V 输出电流:100 mA 电源电流:1 mA 最大工作温度:+ 70 C 封装 / 箱体:SOIC-8 Narrow 封装:Tube
MAX683EUA-T 功能描述:电荷泵 RoHS:否 制造商:Maxim Integrated 功能:Inverting, Step Up 输出电压:- 1.5 V to - 5.5 V, 3 V to 11 V 输出电流:100 mA 电源电流:1 mA 最大工作温度:+ 70 C 封装 / 箱体:SOIC-8 Narrow 封装:Tube
MAX6840XSD0 制造商:Maxim Integrated Products 功能描述:ULTRA-LOW-VOLTAGE SC70 VOLTAGE DET - Cut Tape Product 制造商:Rochester Electronics LLC 功能描述:
MAX6840XSD0+ 制造商:Maxim Integrated Products 功能描述:PROCESSOR SUPERVISOR ADJV 16UA 4PIN SC-70 - Cut Tape Product