- 您现在的位置：买卖IC网 > PDF目录20740 > MAX6946CAWE+T (Maxim Integrated)IC LED DRIVER LINEAR 16-WLP PDF资料下载
参数资料
| 型号： | MAX6946CAWE+T |
| 厂商： | Maxim Integrated |
| 文件页数： | 11/24页 |
| 文件大小： | 0K |
| 描述： | IC LED DRIVER LINEAR 16-WLP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 恒定电流： | 是 |
| 拓扑： | 开路漏极，PWM |
| 输出数： | 10 |
| 内部驱动器： | 是 |
| 类型 - 主要： | 背光 |
| 类型 - 次要： | RGB，白色 LED |
| 频率： | 400kHz |
| 电源电压： | 2.25 V ~ 3.6 V |
| 输出电压： | 7V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-WLP |
| 供应商设备封装： | 16-WLP（2x2） |
| 包装： | 带卷 (TR) |
| 工作温度： | -40°C ~ 125°C |
10-Port, Constant-Current LED Driver and
I/O Expander with PWM Intensity Control
PWM Intensity Control and Phasing
The MAX6946/MAX6947 use an internal 32kHz oscilla-
tor to generate PWM timing for LED intensity control.
The MAX6946 also features an OSC input to allow for
an external clock for generating PWM timing for LED
intensity control. Select the PWM clock source for the
MAX6946 with configuration register bit D7 (Table 2).
The MAX6947 powers up configured to use the internal
32kHz oscillator by default. The MAX6946 powers up
configured to use the external clock source by default.
A PWM period comprises 256 cycles of the nominal
32kHz PWM clock (Figure 2). Individually set the ports’
PWM duty cycle between 3/256 and 254/256. See
Table 4 for port register settings.
Configure PWM timing by setting the stagger bit in the
configuration register (Table 2), either with output stag-
gering or without. Clearing the stagger bit causes all
outputs using PWM to switch at the same time using
OUTPUT
REGISTER
the timing shown in Figure 2. All outputs, therefore,
draw load current at the exactly same time for the same
PWM setting. This means that if, for example, all out-
puts are set to 0x80 (128/256 duty cycle), the current
draw would be zero (all loads off) for half the time, and
full (all loads on) for the other half.
Setting the stagger bit causes the PWM timing of the 10
port outputs to stagger by 32 counts of the 256-count
PWM period (i.e., 1/8th), distributing the port output
switching points across the PWM period (Figure 3).
Staggering reduces the di/dt output-switching transient
on the supply and also reduces the peak/mean current
requirement.
Set or clear the stagger bit during shutdown. Changing
the stagger bit during normal operation can cause a
transient flicker in any PWM-controlled LEDs because
of the fundamental PWM timing changes.
VALUE
0x00
0x01
0x02
0x03
0x04
0xFC
7.8125ms NOMINAL PWM PERIOD
OUTPUT STATIC-LOW LOGIC DRIVE WITH INPUT BUFFER ENABLED (GPI)
OUTPUT STATIC-HIGH LOGIC DRIVE WITH INPUT BUFFER ENABLED (GPI)
OUTPUT STATIC-LOW CONSTANT CURRENT WITH INPUT BUFFER DISABLED (STATIC LED DRIVE ON)
OUTPUT LOW 3/256 DUTY CONSTANT CURRENT WITH INPUT BUFFER DISABLED (PWM LED DRIVE)
OUTPUT LOW 4/256 DUTY CONSTANT CURRENT WITH INPUT BUFFER DISABLED (PWM LED DRIVE)
OUTPUT LOW 252/256 DUTY CONSTANT CURRENT WITH INPUT BUFFER DISABLED (PWM LED DRIVE)
HIGH-Z
LOW
HIGH-Z
LOW
HIGH-Z
LOW
HIGH-Z
LOW
HIGH-Z
LOW
HIGH-Z
LOW
0xFD
OUTPUT LOW 253/256 DUTY CONSTANT CURRENT WITH INPUT BUFFER DISABLED (PWM LED DRIVE)
HIGH-Z
LOW
0xFE
0xFF
OUTPUT LOW 254/256 DUTY CONSTANT CURRENT WITH INPUT BUFFER DISABLED (PWM LED DRIVE)
OUTPUT STATIC HIGH IMPEDANCE WITH INPUT BUFFER DISABLED (STATIC LED DRIVE OFF)
HIGH-Z
LOW
HIGH-Z
LOW
Figure 2. Static and PWM Constant-Current Waveforms
______________________________________________________________________________________
11
相关PDF资料 |
PDF描述 |
|---|---|
| RS3B-13 | RECT FAST RECOVERY 100V 3A SMC |
| GBM25DCMN | CONN EDGECARD 50POS .156 WW |
| CWR09FC225KB | CAP TANT 2.2UF 10V 10% 1505 |
| GBM25DCMH | CONN EDGECARD 50POS .156 WW |
| TPSV477K006R0100 | CAP TANT 470UF 6.3V 10% 2924 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX6946EVCMAXQU+ | 功能描述:LED 照明开发工具 MAX6946 Evaluation Kit/Evaluation System RoHS:否 制造商:Fairchild Semiconductor 产品:Evaluation Kits 用于:FL7732 核心: 电源电压:120V 系列: 封装: |
| MAX6946EVKIT | 功能描述:LED 照明开发工具 10-Port Constant-Current LED Driver and I/O Expander with PWM Intensity Control RoHS:否 制造商:Fairchild Semiconductor 产品:Evaluation Kits 用于:FL7732 核心: 电源电压:120V 系列: 封装: |
| MAX6946EVKIT+ | 功能描述:LED 照明开发工具 MAX6946 Evaluation Kit/Evaluation System RoHS:否 制造商:Fairchild Semiconductor 产品:Evaluation Kits 用于:FL7732 核心: 电源电压:120V 系列: 封装: |
| MAX6947ATE+ | 功能描述:LED照明驱动器 10-Port Constant Current LED Driver RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MAX6947ATE+T | 功能描述:LED照明驱动器 10-Port Constant Current LED Driver RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
发布紧急采购，3分钟左右您将得到回复。