参数资料
型号: MAX7427EUA+
厂商: Maxim Integrated Products
文件页数: 12/12页
文件大小: 0K
描述: IC FILTER LOWPASS 5TH 8UMAX
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 50
滤波器类型: 椭圆,低通开关电容器
频率 - 截止或中心: 12kHz
滤波器数: 1
滤波器阶数: 5th
电源电压: 2.7 V ~ 3.6 V
安装类型: 表面贴装
封装/外壳: 8-TSSOP,8-MSOP(0.118",3.00mm 宽)
供应商设备封装: 8-uMAX
包装: 管件
产品目录页面: 1424 (CN2011-ZH PDF)
MAX7426/MAX7427
5th-Order, Lowpass, Elliptic,
Switched-Capacitor Filters
_______________________________________________________________________________________
9
powered from 0 to VDD. Varying the rate of the external
clock adjusts the corner frequency of the filter:
Internal Clock
When using the internal oscillator, the capacitance
(COSC) on CLK determines the oscillator frequency:
Since COSC is in the low picofarads, minimize the stray
capacitance at CLK so that it does not affect the inter-
nal oscillator frequency. Varying the rate of the internal
oscillator adjusts the filter’s corner frequency by a
100:1 clock-to-corner frequency ratio. For example, an
internal oscillator frequency of 100kHz produces a
nominal corner frequency of 1kHz.
Input Impedance vs. Clock Frequencies
The MAX7426/MAX7427’s input impedance is effective-
ly that of a switched-capacitor resistor (see the following
equation), and is inversely proportional to frequency.
The input impedance values determined by the equa-
tion represent the average input impedance, since the
input current is not continuous. As a rule, use a driver
with an output resistance less than 10% of the filter’s
input impedance.
Estimate the input impedance of the filter by using the
following formula:
where fCLK = clock frequency and CIN = 1pF.
Low-Power Shutdown Mode
The MAX7426/MAX7427 have a shutdown mode that is
activated by driving SHDN low. In shutdown mode, the
filter supply current reduces to 0.2A, and the output of
the filter becomes high impedance. For normal opera-
tion, drive SHDN high or connect to VDD.
Applications Information
Offset (OS) and Common-Mode (COM)
Input Adjustment
COM sets the common-mode input voltage and is
biased at midsupply with an internal resistor-divider. If
the application does not require offset adjustment, con-
nect OS to COM. For applications where offset adjust-
ment is required, apply an external bias voltage
through a resistor-divider network to OS, as shown in
Figure 3. For applications that require DC level shifting,
adjust OS with respect to COM. (Note: Do not leave OS
unconnected.) The output voltage is represented by
these equations:
where (VIN - VCOM) is lowpass filtered by the SCF and
OS is added at the output stage. See the Electrical
VV
V
typical
OUT
IN
COM
OS
COM
DD
(
)
()
=
+
=
2
Z
1
f
C
IN
CLK
IN
=
×
f
(kHz)
17.5
10
C
(pF)
OSC
3
OSC
=
×
f
C
CLK
=
100
PASSBAND
STOPBAND
GAIN
(dB)
FREQUENCY
fC
fS
fC
fS
fC
TRANSITION RATIO =
RIPPLE
VDD
VSUPPLY
IN
CLK
GND
INPUT
OUTPUT
50k
OUT
0.1
F
0.1
F
0.1
F
CLOCK
SHDN
COM
OS
MAX7426
MAX7427
Figure 2. Elliptic Filter Response
Figure 3. Offset Adjustment Circuit
相关PDF资料
PDF描述
VE-20W-IY-F1 CONVERTER MOD DC/DC 5.5V 50W
VE-20V-IY-F2 CONVERTER MOD DC/DC 5.8V 50W
VE-20T-IY-F3 CONVERTER MOD DC/DC 6.5V 50W
VE-20R-IY-F2 CONVERTER MOD DC/DC 7.5V 50W
VE-20P-IY-F2 CONVERTER MOD DC/DC 13.8V 50W
相关代理商/技术参数
参数描述
MAX7427EUA+ 功能描述:有源滤波器 5th-Order Lowpass Elliptic Filter RoHS:否 制造商:Maxim Integrated 通道数量:1 截止频率:150 KHz 电源电压-最大:11 V 电源电压-最小:4.74 V 最大工作温度:+ 85 C 安装风格:Through Hole 封装 / 箱体:PDIP N 封装:Tube
MAX7427EUA+T 功能描述:有源滤波器 5th-Order Lowpass Elliptic Filter RoHS:否 制造商:Maxim Integrated 通道数量:1 截止频率:150 KHz 电源电压-最大:11 V 电源电压-最小:4.74 V 最大工作温度:+ 85 C 安装风格:Through Hole 封装 / 箱体:PDIP N 封装:Tube
MAX7427EUA-T 功能描述:有源滤波器 RoHS:否 制造商:Maxim Integrated 通道数量:1 截止频率:150 KHz 电源电压-最大:11 V 电源电压-最小:4.74 V 最大工作温度:+ 85 C 安装风格:Through Hole 封装 / 箱体:PDIP N 封装:Tube
MAX7428EKA 制造商:Maxim Integrated Products 功能描述:8 PINS SOT PKG - Bulk
MAX7428EKA+ 制造商:Maxim Integrated Products 功能描述: 制造商:Maxim Integrated Products 功能描述:ACTV FLTR SGL LOW PASS 6TH ORDR 8PIN SOT-23 - Cut Tape Product