- 您现在的位置：买卖IC网 > PDF目录11018 > MAX7432EUD+ (Maxim Integrated Products)IC FILTER VIDEO SD 14-TSSOP PDF资料下载
参数资料
| 型号： | MAX7432EUD+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 21/21页 |
| 文件大小： | 0K |
| 描述： | IC FILTER VIDEO SD 14-TSSOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 96 |
| 滤波器类型： | 低通 |
| 频率 - 截止或中心： | 5MHz |
| 滤波器数： | 3 |
| 滤波器阶数： | 6th |
| 电源电压： | 4.5 V ~ 5.5 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 14-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 14-TSSOP |
| 包装： | 管件 |
MAX7428/MAX7430/MAX7432A
Standard Definition Video Reconstruction
Filters and Buffers
_______________________________________________________________________________________
9
Filter
Filter Response
The reconstruction filter consists of a 6th-order
Butterworth filter in three second-order stages. The
Butterworth filter features a maximally flat passband for
NTSC and PAL bandwidths. The stopband offers typical-
ly 50dB of attenuation at sampling frequencies of 25MHz
and above (see Typical Operating Characteristics).
The corner frequency is not critical since the response
of the filter meets both the stopband and passband
specifications. The MAX7428/MAX7430/MAX7432A
incorporate an autotrimming feature that reduces the
corner frequency variation digitally. It is possible,
although not likely, that a discrete shift in the corner fre-
quency may occur due to an external environmental
change. The autotrimming operates continuously so
that the corner frequency remains centered over the full
operating temperature range.
High-Frequency Boost
The high-frequency boost compensates for signal degra-
dation and roll-off in the signal path prior to the MAX7428/
MAX7430/MAX7432A. High-frequency boost is program-
mable in four steps to increase image sharpness.
Output Buffer
The output buffer is able to drive two 150
Ω video loads
with a 2Vp-p signal. The +6dB gain of the output buffer
is independent of the filter bypass or input selection.
The output buffer drives the 75
Ω backmatch resistors
and series capacitor (typically 220F). The MAX7428/
MAX7430/MAX7432A are able to drive the video load
directly without using the 220F capacitor. This feature
is common in SCART applications. The OUTDISABLE bit
of the control register disables the output (mute) (see
Control Register section).
Filter Bypass
The MAX7428/MAX7430/MAX7432A offer selectable fil-
ter bypassing that allows either of the video inputs to
be filtered or unfiltered. The 1M
Ω optional input resis-
tors are needed only in filter bypass mode to provide a
discharge path for the input coupling capacitors.
Serial Interface
Maxim’s Single Pin Bus (MSPB) interface uses DATA to
transfer data to and from the microprocessor (P) and
the MAX7428/MAX7430/MAX7432A. This negative logic
protocol uses three different pulse widths to represent
a logic “1”, logic “0”, and control commands. MSPB
allows up to 16 devices to be connected on the same
bus by assigning a unique 4-bit identification address
to each device. The P can communicate to each
device individually or by sending a “broadcast” mes-
sage to all the devices. The unique address for each
device is set by means of the time constant set by the
external capacitor connected in parallel with the exter-
nal 300k
Ω resistor (see Initializing the MAX7428/
MAX7430/MAX7432A section).
MAX7428 Control Register
Table 1 defines the structure of the MAX7428 8-bit con-
trol register programmed by MSPB. This register con-
trols the selection of INA or INB, SYNCIO functionality,
filter bypassing, clamp-level selection, high-frequency
boost control, and output disable. See Maxim’s Single
Pin Bus Interface (MSPB) section for detailed program-
ming instructions.
SYNCIO: SYNCIO Select bit. A logic 0 sets the SYNCIO
pin to function as an output while a logic 1 sets SYNCIO
to function as an input.
ABSEL: Channel Select bit. A logic 0 selects the input
at INB to be processed while a logic 1 selects the input
at INA to be processed.
BYPASS: Filter Bypass Select bit. A logic 1 selects the
filter while a logic 0 bypasses the filter.
Table 1. MAX7428 Control Register
(MSB)
FIRST BIT
(LSB)
NAME
SYNCIO
ABSEL
BYPASS
CLEVEL
BOOST1
BOOST0
OUTDISABLE
—
DEFAULT
0
1
0
BOOST1
BOOST0
RELATIVE HIGH
FREQUENCY
BOOST
000
0
1
0.3db to 0.5db
1
0
0.6db to 1.0db
1
0.9db to 1.5db
Table 2. Boost Level Programming
相关PDF资料 |
PDF描述 |
|---|---|
| VE-JWM-IW-B1 | CONVERTER MOD DC/DC 10V 100W |
| VE-J12-IW-B1 | CONVERTER MOD DC/DC 15V 100W |
| VE-J11-IW-B1 | CONVERTER MOD DC/DC 12V 100W |
| V48A48C500BF3 | CONVERTER MOD DC/DC 48V 500W |
| V48A48C500BF2 | CONVERTER MOD DC/DC 48V 500W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX7432EUD/GG8 | 功能描述:有源滤波器 RoHS:否 制造商:Maxim Integrated 通道数量:1 截止频率:150 KHz 电源电压-最大:11 V 电源电压-最小:4.74 V 最大工作温度:+ 85 C 安装风格:Through Hole 封装 / 箱体:PDIP N 封装:Tube |
| MAX7432EUD+ | 功能描述:视频 IC Standard Def Video Reconstruction Filtr RoHS:否 制造商:Fairchild Semiconductor 工作电源电压:5 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-28 封装:Reel |
| MAX7432EUD+T | 功能描述:视频 IC Standard Def Video Reconstruction Filtr RoHS:否 制造商:Fairchild Semiconductor 工作电源电压:5 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-28 封装:Reel |
| MAX7432EUD-T | 功能描述:有源滤波器 RoHS:否 制造商:Maxim Integrated 通道数量:1 截止频率:150 KHz 电源电压-最大:11 V 电源电压-最小:4.74 V 最大工作温度:+ 85 C 安装风格:Through Hole 封装 / 箱体:PDIP N 封装:Tube |
| MAX7432EVC16 | 功能描述:有源滤波器 Programmers, Development Systems RoHS:否 制造商:Maxim Integrated 通道数量:1 截止频率:150 KHz 电源电压-最大:11 V 电源电压-最小:4.74 V 最大工作温度:+ 85 C 安装风格:Through Hole 封装 / 箱体:PDIP N 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。