- 您现在的位置：买卖IC网 > PDF目录20781 > MAX8647ETE+ (Maxim Integrated)IC LED DRVR WT/RGB BCKLGT 16TQFN PDF资料下载
参数资料
| 型号： | MAX8647ETE+ |
| 厂商： | Maxim Integrated |
| 文件页数： | 7/15页 |
| 文件大小： | 0K |
| 描述： | IC LED DRVR WT/RGB BCKLGT 16TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 100 |
| 恒定电流： | 是 |
| 拓扑： | PWM，切换式电容器（充电泵） |
| 输出数： | 6 |
| 内部驱动器： | 是 |
| 类型 - 主要： | 背光 |
| 类型 - 次要： | RGB，白色 LED |
| 频率： | 1MHz |
| 电源电压： | 1.7 V ~ 5.5 V |
| 输出电压： | 5V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-WFQFN 裸露焊盘 |
| 供应商设备封装： | 16-TQFN（3x3） |
| 包装： | 管件 |
| 工作温度： | -40°C ~ 85°C |
| 产品目录页面： | 1424 (CN2011-ZH PDF) |
Ultra-Efficient Charge Pumps for
Six White/RGB LEDs in 3mm x 3mm Thin QFN
Pin Description
PIN
MAX8647 MAX8648
NAME
FUNCTION
Supply Voltage Input. The input voltage range is 2.7V to 5.5V. Bypass IN to GND with a
1
1
IN
1μF ceramic capacitor as close as possible to the IC. IN is high impedance during
shutdown. Connect IN to the anodes of all the LEDs.
2
3
4
5
6
2
3
4
5
6
GND
C1P
C2P
C2N
C1N
Ground. Connect GND to system ground and the input bypass capacitor as close as
possible to the IC.
Transfer Capacitor 1 Positive Connection. Connect a 1μF ceramic capacitor from C1P
to C1N.
Transfer Capacitor 2 Positive Connection. Connect a 1μF ceramic capacitor from C2P
to C2N.
Transfer Capacitor 2 Negative Connection. Connect a 1μF ceramic capacitor from C2P
to C2N. An internal 10k Ω resistor pulls C2N to GND during shutdown.
Transfer Capacitor 1 Negative Connection. Connect a 1μF ceramic capacitor from C1P
to C1N.
Charge-Pump Negative Output. Connect a 1μF ceramic capacitor from NEG to GND. In
7
7
NEG
shutdown, an internal 10k Ω resistor pulls NEG to GND. Connect the exposed paddle to
NEG directly under the IC.
LED Current Regulators. Current flowing into LED_ is based on the internal registers.
Connect LED_ to the cathodes of the external LEDs. LED_ is high impedance during
8–13
8–13
LED6–LED1
shutdown. For the MAX8647, program any unused LED_ to off and LED_ can be
shorted to ground or left unconnected. For the MAX8648, short any unused LED_ to IN
prior to power-up to disable the corresponding current regulator.
14
15
16
—
—
—
SDA
SCL
V DD
I 2 C Data Input. Data is read on the rising edge of SCL.
I 2 C Clock Input. Data is read on the rising edge of SCL.
Logic-Input Supply Voltage. Connect to the supply voltage driving SDA and SCL.
Bypass V DD to GND with a 0.1μF ceramic capacitor.
Enable and Serial-Pulse Dimming Control. ENA controls LED1, LED2, and LED3. ENB
controls LED4 and LED5. ENC controls LED6. Drive EN_ logic-high to turn on the IC
—
14, 15, 16
ENC, ENB, ENA
and enable the corresponding LED_ at 24mA each. Drive an individual EN_ logic-low
for greater than 4ms to turn off the corresponding-current regulators or drive all three
EN_ low to place the IC in shutdown. See the Serial-Pulse Dimming Control (MAX8648)
section.
—
—
EP
Exposed Paddle. Connect to NEG.
_______________________________________________________________________________________
7
相关PDF资料 |
PDF描述 |
|---|---|
| EEC19DRXI | CONN EDGECARD 38POS DIP .100 SLD |
| MAX6971AUG+ | IC LED DRIVER LINEAR 24-TSSOP |
| ISL97686IRTZ-T | IC LED DRVR BACKLIGHT 28TQFN |
| MAX6964AEG+ | IC LED DRIVER LINEAR 24-QSOP |
| MAX6968APE+ | IC LED DRIVER LINEAR 16-DIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX8647ETE+ | 功能描述:LED照明驱动器 Charge Pump for 6 White/RGB LEDs RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MAX8647ETE+T | 功能描述:LED照明驱动器 Charge Pump for 6 White/RGB LEDs RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MAX8648ETE | 制造商:MAXIM 功能描述:Pb Free |
| MAX8648ETE+ | 功能描述:LED照明驱动器 Charge Pump for 6 White/RGB LEDs RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MAX8648ETE+T | 功能描述:LED照明驱动器 Charge Pump for 6 White/RGB LEDs RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
发布紧急采购，3分钟左右您将得到回复。