- 您现在的位置：买卖IC网 > PDF目录20704 > MAX8891EXK29+T (Maxim Integrated)IC REG LDO 2.85V .15A SC70-5 PDF资料下载
参数资料
| 型号： | MAX8891EXK29+T |
| 厂商： | Maxim Integrated |
| 文件页数： | 5/8页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO 2.85V .15A SC70-5 |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 稳压器拓扑结构： | 正，固定式 |
| 输出电压： | 2.85V |
| 输入电压： | 最高 6V |
| 电压 - 压降（标准）： | 0.135V @ 120mA |
| 稳压器数量： | 1 |
| 电流 - 输出： | 150mA（最小） |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 6-TSSOP（5 引线），SC-88A，SOT-353 |
| 供应商设备封装： | SC-70-5 |
| 包装： | 标准包装 |
| 其它名称： | MAX8891EXK29+TDKR |
MAX8891/MAX8892
High PSRR, Low-Dropout, 150mA
Linear Regulators
Pin Description
MAX8891
1
2
3
—
4
5
PIN
MAX8892
1
2
3
4
—
5
NAME
IN
GND
SHDN
FB
N.C.
OUT
FUNCTION
Unregulated Input Supply
Ground
Shutdown. Pull low to disable the regulator.
Adjustable Output Feedback Point
Not Internally Connected
Regulated Output Voltage. Bypass with a capacitor to GND. See the Capacitor Selection
and Regulator Stability section for more details.
Detailed Description
The MAX8891/MAX8892 are low-dropout, low-quies-
cent current linear regulators designed for space-
restricted applications. The parts are available with
preset output voltages ranging from 1.5V to 4.5V in
100mV increments. These devices can supply loads up
to 150mA. As shown in the Functional Diagram, the
MAX8891 consists of an innovative bandgap core, error
amplifier, p-channel pass transistor, and internal feed-
back voltage-divider. The MAX8892 allows for
adjustable output with an external feedback network.
Additional blocks include a current limiter, thermal sen-
sor, and shutdown logic.
heavy loads. The MAX8891/MAX8892 do not suffer from
these problems and consume only 40μA of quiescent
current in light load and 220μA in dropout (see the
Typical Operating Characteristics).
Output Voltage Selection
The MAX8891 is supplied with factory-set output volt-
ages from 1.5V to 4.5V, in 100mV increments (see the
Ordering Information). The MAX8892 features a user-
adjustable output through an external feedback net-
work (see the Typical Operating Circuits).
To set the output of the MAX8892, use the following
equation:
R 1 = R 2 × ?
- 1 ?
The 1.225V bandgap reference is connected to the
error amplifier’s inverting input. The error amplifier com-
pares this reference with the feedback voltage and
? V OUT
? V REF
?
?
amplifies the difference. If the feedback voltage is lower
than the reference voltage, the pass-transistor gate is
pulled low. This allows more current to pass to the out-
put and increases the output voltage. If the feedback
voltage is too high, the pass transistor gate is pulled
high, allowing less current to pass to the output. The
output voltage is fed back through an internal (external
for the MAX8892) resistor voltage-divider connected to
the OUT pin.
Internal P-Channel Pass Transistor
The MAX8891/MAX8892 feature a 1 Ω (typ) p-channel
MOSFET pass transistor. This provides several advan-
tages over similar designs using a PNP pass transistor,
including longer battery life. The p-channel MOSFET
requires no base drive, which considerably reduces qui-
escent current. PNP-based regulators waste consider-
able current in dropout when the pass transistor
saturates. They also use high base-drive current under
Maxim Integrated
where R2 is chosen to be less than 240k Ω and V REF =
1.225V. Use 1% or better resistors.
Shutdown
The MAX8891/MAX8892 feature a low-power shutdown
mode that reduces quiescent current less than 1μA.
Driving SHDN low disables the voltage reference, error
amplifier, gate-drive circuitry, and pass transistor (see
the Functional Diagram), and the device output enters a
high-impedance state. Connect SHDN to IN for normal
operation.
Current Limit
The MAX8891/MAX8892 include a current limiter, which
monitors and controls the pass transistor’s gate volt-
age, limiting the output current to 200mA. The output
can be continuously shorted to ground without damag-
ing the part.
5
相关PDF资料 |
PDF描述 |
|---|---|
| VI-J22-CX-F2 | CONVERTER MOD DC/DC 15V 75W |
| RGM40DTMD | CONN EDGECARD 80POS R/A .156 SLD |
| RSA44DRMN-S288 | CONN EDGECARD 88POS .125 EXTEND |
| REC5-1205SRW/H2/A | CONV DC/DC 5W 9-18VIN 05VOUT |
| RMA44DRMN-S288 | CONN EDGECARD 88POS .125 EXTEND |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX8891EXK30+T | 功能描述:低压差稳压器 - LDO 150mA Linear Regulator RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| MAX8891EXK31+T | 功能描述:低压差稳压器 - LDO 150mA Linear Regulator RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| MAX8891EXK33/V+T | 功能描述:低压差稳压器 - LDO 150mA Linear Regulator RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| MAX8891EXK33+ | 制造商:Maxim Integrated Products 功能描述:HIGH PSRR, LOW-DROPOUT, 150MA LINEAR REGULATORS - Rail/Tube |
| MAX8891EXK33+T | 功能描述:低压差稳压器 - LDO 150mA Linear Regulator RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
发布紧急采购，3分钟左右您将得到回复。