- 您现在的位置：买卖IC网 > PDF目录10618 > MAX9134GHJ+ (Maxim Integrated Products)IC SW LVDS CROSSBAR 32TQFP-EP PDF资料下载
参数资料
| 型号： | MAX9134GHJ+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 3/20页 |
| 文件大小： | 0K |
| 描述： | IC SW LVDS CROSSBAR 32TQFP-EP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 360 |
| 类型： | LVDS 纵横开关 |
| 应用： | 数字视频 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 32-TQFP 裸露焊盘 |
| 供应商设备封装： | 32-TQFP-EP（5x5） |
| 包装： | 管件 |
MAX9132/MAX9134/MAX9135
I2C Interface
The MAX9132/MAX9134/MAX9135 operate as slaves
that send and receive data through I2C (see Figure 1).
The interface uses a serial-data line (SDA) and a serial-
clock line (SCL) to achieve bidirectional communication
between master(s) and slave(s). A master (typically a
microcontroller) initiates all data transfers to and from
the slave and generates the SCL clock that synchro-
nizes the data transfer. The SDA line operates as both
an input and an open-drain output. A pullup resistor,
typically 4.7k, is required on SDA. The SCL line oper-
ates only as an input. A pullup resistor is required on
SCL if there are multiple masters on the I2C interface, or
if the master in a single-master system has an open-
drain SCL output. Each transmission consists of a
START condition sent by a master, followed by the 7-bit
slave address plus R/W bit, a register address byte, a
data byte, and finally a STOP condition. Table 3 shows
the slave address selection by the AS0 and AS1 pins.
Data Format for Writing to the Slave
A write to the MAX9132/MAX9134/MAX9135 comprises
the transmission of the slave address with the R/
W bit
set to 0, followed by at least 1 byte of information. The
first byte of information is the command byte. The com-
mand byte determines which registers of the
MAX9132/MAX9134/MAX9135 are to be written by the
next byte, if received. If a STOP condition is detected
after the command byte is received, the MAX9132/
MAX9134/MAX9135 take no further action beyond stor-
ing the command byte. Any bytes that are received
after the command byte are data bytes. The first data
byte goes into the internal register of the crossbar
switch selected by the command byte (Figure 2). If
multiple data bytes are transmitted before a STOP con-
dition is detected, these bytes are generally stored in
subsequent MAX9132/MAX9134/MAX9135 internal reg-
isters because the command byte address generally
autoincrements (Table 1).
Programmable, High-Speed, Multiple
Input/Output LVDS Crossbar Switches
______________________________________________________________________________________
11
REGISTER
ADDRESS
REGISTER BIT(S)
DESCRIPTION
VALUE
FUNCTION
0
DOUT1 preemphasis off
D7
DOUT1 Preemphasis
1
DOUT1 preemphasis on
000
DOUT1 not connected
001
DOUT1 connected to DIN1
010
DOUT1 connected to DIN0
011
DOUT1 connected to DIN2
D[6:4]
DOUT1 Routing
Connection
100
DOUT1 connected to DIN3
0
DOUT0 preemphasis off
D3
DOUT0 Preemphasis
1
DOUT0 preemphasis on
000
DOUT0 not connected
001
DOUT0 connected to DIN1
010
DOUT0 connected to DIN0
011
DOUT0 connected to DIN2
0x01
D[2:0]
DOUT0 Routing
Connection
100
DOUT0 connected to DIN3
D[7:4]
Reserved
0000
Set these bits to 0000
0
DOUT2 preemphasis off
D3
DOUT2 Preemphasis
1
DOUT2 preemphasis on
000
DOUT2 not connected
001
DOUT2 connected to DIN1
010
DOUT2 connected to DIN0
011
DOUT2 connected to DIN2
0x02
D[2:0]
DOUT2 Routing
Connection
100
DOUT2 connected to DIN3
Table 2b. I2C Switch Routing Control Registers for the MAX9135
相关PDF资料 |
PDF描述 |
|---|---|
| MAX232AEWE+ | IC 2DVR/2RCVR RS232 5V 16-SOIC |
| MAX3815ACCM+ | IC DGTL VIDEO EQUALIZER 48TQFP |
| MAX3816ACUE+ | IC I2C 2WIRE EXTENDER 16-TSSOP |
| AD8324JRQZ-REEL7 | IC LINE DRIVER CBL 3.3V 20QSOP |
| VE-JWB-MW-F2 | CONVERTER MOD DC/DC 95V 100W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX9134GHJ+ | 功能描述:LVDS 接口集成电路 Programmable LVDS Crossbar Switch RoHS:否 制造商:Texas Instruments 激励器数量:4 接收机数量:4 数据速率:155.5 Mbps 工作电源电压:5 V 最大功率耗散:1025 mW 最大工作温度:+ 85 C 封装 / 箱体:SOIC-16 Narrow 封装:Reel |
| MAX9134GHJ+T | 功能描述:LVDS 接口集成电路 Programmable LVDS Crossbar Switch RoHS:否 制造商:Texas Instruments 激励器数量:4 接收机数量:4 数据速率:155.5 Mbps 工作电源电压:5 V 最大功率耗散:1025 mW 最大工作温度:+ 85 C 封装 / 箱体:SOIC-16 Narrow 封装:Reel |
| MAX9135GHJ | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Programmable, High-Speed, Multiple Input/Output LVDS Crossbar Switches |
| MAX9135GHJ+ | 功能描述:LVDS 接口集成电路 Programmable LVDS Crossbar Switch RoHS:否 制造商:Texas Instruments 激励器数量:4 接收机数量:4 数据速率:155.5 Mbps 工作电源电压:5 V 最大功率耗散:1025 mW 最大工作温度:+ 85 C 封装 / 箱体:SOIC-16 Narrow 封装:Reel |
| MAX9135GHJ+T | 功能描述:LVDS 接口集成电路 Programmable LVDS Crossbar Switch RoHS:否 制造商:Texas Instruments 激励器数量:4 接收机数量:4 数据速率:155.5 Mbps 工作电源电压:5 V 最大功率耗散:1025 mW 最大工作温度:+ 85 C 封装 / 箱体:SOIC-16 Narrow 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。