- 您现在的位置：买卖IC网 > PDF目录8521 > MAX9502GAALT+T (Maxim Integrated Products)IC VIDEO AMP 2.5V LP 6-UDFN PDF资料下载
参数资料
| 型号： | MAX9502GAALT+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 10/11页 |
| 文件大小： | 0K |
| 描述： | IC VIDEO AMP 2.5V LP 6-UDFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 应用： | 重构滤波器 |
| 电路数： | 1 |
| 电流 - 电源： | 5.3mA |
| 电流 - 输出 / 通道： | 95mA |
| 电压 - 电源，单路/双路(±)： | 2.5 V ~ 3.6 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 6-WDFN |
| 供应商设备封装： | 6-uDFN（2x2） |
| 包装： | 标准包装 |
| 其它名称： | MAX9502GAALT+TDKR |
MAX9502
Detailed Description
The MAX9502 filters and amplifies the video DAC output
in applications such as digital still cameras and mobile
phones. The MAX9502 consists of a lowpass filter and an
output video buffer capable of driving a standard 150
video load to ground. The MAX9502G output buffer pro-
vides a fixed gain of +6dB, while the MAX9502M output
buffer provides a fixed gain of +12dB.
Filter
The MAX9502 contains a 4th-order Chebyshev recon-
struction filter. The Chebyshev-type response features
a 0.4dB flat passband for NTSC and PAL signals. The
stopband offers 55dB (typ) of attenuation at 27MHz
and above (see the Typical Operating Characteristics).
Output Amplifier
The MAX9502G features a +6dB gain, while the
MAX9502M features a +12dB gain. Operating from a
2.5V to 3.0V supply, the output amplifier is able to drive a
2V signal into a 150
video load to ground. Operating
from a 3.0V to 3.6V supply, the output amplifier is able to
drive a 2.4VP-P signal into a 150
video load to ground.
The output is typically offset 110mV above ground to
guarantee linear operation of the amplifier. The MAX9502
output only sources current; all loads should be connect-
ed to ground.
Short-Circuit Protection
The MAX9502 typical application circuit includes a 75
back-termination resistor that limits short-circuit currents
for an external short applied at the video output. The
MAX9502 features internal output short-circuit protection
to prevent device damage in prototyping and applica-
tions where the amplifier output can be directly shorted.
Short-circuit protection activates if the output is short-cir-
cuited and the output current exceeds 95mA. During
short-circuit protection, the output of the MAX9502 is shut
off for 12s and then turns on for 0.8s. If the short is still
present, the MAX9502 output shuts off again. Extended
short circuits result in a pulsed output. The device
resumes normal operation after the short is removed.
Applications Information
Input Considerations
The MAX9502 input is DC-coupled. When the supply
voltage is between a 2.5V and 3V supply, the input volt-
age range extends from ground to 1.05V for the
MAX9502G and from ground to 0.525V for the
MAX9502M. When the supply voltage is between 3V and
3.6V, the input voltage range extends from ground to
1.2V for the MAX9502G and from ground to 0.6V for the
MAX9502M. The MAX9502G accepts a composite video
signal with a sync tip from 0 to 50mV and the MAX9502M
accepts a composite video signal with a sync tip from 0
to 25mV. A typical current-output DAC that operates
from a single supply usually creates a composite video
signal with a sync tip very close to ground. Hence, the
DAC output can be directly connected to the MAX9502
input. Keep the board trace as short as possible to mini-
mize parasitic stray capacitance and prevent uninten-
tional high-frequency attenuation.
Output Considerations
The MAX9502 output must be DC-coupled. No AC-cou-
pling capacitors are allowed. The MAX9502 connects
directly to the video cable through a 75
series back-
termination resistor. The other end of the cable should
be properly terminated with a 75
resistor as well.
Because of this configuration, the peak-to-peak ampli-
tude as well as the DC level of the signal is divided by
two. The MAX9502 output signal is level-shifted up so
the sync tip is around 110mV.
Power-Supply Bypassing and Layout
Considerations
The MAX9502 operates from a single-supply voltage
down to 2.5V, allowing for low-power consumption.
Bypass VCC to GND with a 0.1F capacitor. Place all
external components as close to the device as possible.
2.5V Video Amplifier with Reconstruction Filter
8
_______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| VE-JNT-MZ-B1 | CONVERTER MOD DC/DC 6.5V 25W |
| VI-BNT-MU-F1 | CONVERTER MOD DC/DC 6.5V 200W |
| VI-J22-MZ-F2 | CONVERTER MOD DC/DC 15V 25W |
| VI-BNR-MU-F4 | CONVERTER MOD DC/DC 7.5V 200W |
| VI-J22-MZ-F1 | CONVERTER MOD DC/DC 15V 25W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX9502GAAXK+ | 制造商:Maxim Integrated Products 功能描述:VID AMP SGL 3.6V 5PIN SC-70 - Rail/Tube |
| MAX9502GAAXK+T | 功能描述:视频放大器 2.5V Video Amplifier RoHS:否 制造商:ON Semiconductor 通道数量:4 电源类型: 工作电源电压:3.3 V, 5 V 电源电流: 最小工作温度: 最大工作温度: 封装 / 箱体:TSSOP-14 封装:Reel |
| MAX9502GELT | 制造商:Maxim Integrated Products 功能描述:2.5V VIDEO AMPLIFIER WITH RECONSTRU - Rail/Tube |
| MAX9502GELT+ | 制造商:Maxim Integrated Products 功能描述:VID AMP SGL 3.6V 6PIN UDFN - Rail/Tube |
| MAX9502GELT+T | 功能描述:视频放大器 2.5V Video Amplifier RoHS:否 制造商:ON Semiconductor 通道数量:4 电源类型: 工作电源电压:3.3 V, 5 V 电源电流: 最小工作温度: 最大工作温度: 封装 / 箱体:TSSOP-14 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。