- 您现在的位置：买卖IC网 > PDF目录2090 > MAX9508ATE+T (Maxim Integrated Products)IC AMP VIDEO FILTER 16-TQFN PDF资料下载
参数资料
| 型号： | MAX9508ATE+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 10/25页 |
| 文件大小： | 0K |
| 描述： | IC AMP VIDEO FILTER 16-TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 应用： | 滤波器 |
| 电路数： | 3 |
| 电流 - 电源： | 13mA |
| 电压 - 电源，单路/双路(±)： | 2.7 V ~ 3.6 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-WFQFN 裸露焊盘 |
| 供应商设备封装： | 16-TQFN-EP（3x3） |
| 包装： | 带卷 (TR) |
MAX9508
Inputs
The MAX9508 video inputs YIN, CIN, and CVBSIN
should be directly connected to the output of the video
current DAC. DC-coupling ensures that the input sig-
nals are ground referenced such that the sync tip of
composite or luma signals is within 50mV of ground
and the blank level of the chroma signal is between
0.5V and 0.65V. Since the input buffer is identical for
YIN, CIN, and CVBSIN, any standard-definition video
signal can be applied to those inputs as long as the
signal is between ground and 1.05V when VDD = 2.7V.
For example, three composite video signals could be
applied to YIN, CIN, and CVBSIN. The RGB set and the
YPbPr set can also be inputs to YIN, CIN, and CVBSIN
(Figure 9).
The EXTCVBSIN input can only handle signals with a
sync pulse, such as composite, video, or luma.
Because the DC level of an external video input signal
is unknown, the external video signal is AC-coupled
through a 0.1F capacitor, and a sync tip clamp sets
the internal DC level of the MAX9508. A 2:1 multiplexer
under the control of the INT/EXT input selects either the
signal at CVBSIN or EXTCVBSIN.
CVBS/S-Video Filter Amplifier with
SmartSleep and Bidirectional Video Support
18
______________________________________________________________________________________
CURRENT
DAC
CURRENT
DAC
CURRENT
DAC
VIDEO ENCODER
Pr/R
Pb/B
Y/G
CIN
YIN
EXTCVBSIN
COUT
YOUT
CVBSOUT1
SHDN
INT/EXT
ACTIVE VIDEO
DETECT
SMARTSLEEP
CVBSIN
CVBSOUT2
LPF
CONTROL
LOGIC
+3.3V
GND
+3.3V
0.1
μF
VDD
CLAMP
BUFFER
LOAD SENSE
6dB
75
Ω
75
Ω
LPF
BUFFER
Pb/B
Y/G
Pr/R
LOAD SENSE
BUFFER
6dB
LOAD SENSE
6dB
75
Ω
LOAD SENSE
6dB
75
Ω
LPF
MAX9508
Figure 9. Y, Pr, Pb or RGB Set Applied to MAX9508
相关PDF资料 |
PDF描述 |
|---|---|
| MAX9510AUA+ | IC AMP VIDEO FILTER 8-UMAX |
| MAX9511CEG+ | IC INTERFACE VGA 24-QSOP |
| MAX9512ATE+ | IC AMP VIDEO FILTER 16-TQFN |
| MAX9513ATE+T | IC AMP VIDEO FILTER 16-TQFN |
| MAX9515ABS+T | IC VIDEO FILTER AMP W/SD 4-UCSP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX9508EVKIT | 功能描述:视频放大器 Evaluation Kit for the MAX9508 RoHS:否 制造商:ON Semiconductor 通道数量:4 电源类型: 工作电源电压:3.3 V, 5 V 电源电流: 最小工作温度: 最大工作温度: 封装 / 箱体:TSSOP-14 封装:Reel |
| MAX9509ATA+ | 制造商:Maxim Integrated Products 功能描述:1.8V, ULTRA-LOW POWER, DIRECTDRIVE VIDEO FILTER AMPLIFIERS - Bulk |
| MAX9509ATA+T | 功能描述:视频放大器 1.8V DirectDrive Video Filter Amp RoHS:否 制造商:ON Semiconductor 通道数量:4 电源类型: 工作电源电压:3.3 V, 5 V 电源电流: 最小工作温度: 最大工作温度: 封装 / 箱体:TSSOP-14 封装:Reel |
| MAX9509EVKIT+ | 功能描述:视频放大器 MAX9509/MAX9510 Evaluation Kits RoHS:否 制造商:ON Semiconductor 通道数量:4 电源类型: 工作电源电压:3.3 V, 5 V 电源电流: 最小工作温度: 最大工作温度: 封装 / 箱体:TSSOP-14 封装:Reel |
| MAX9510AUA+ | 功能描述:视频放大器 1.8V DirectDrive Video Filter Amp RoHS:否 制造商:ON Semiconductor 通道数量:4 电源类型: 工作电源电压:3.3 V, 5 V 电源电流: 最小工作温度: 最大工作温度: 封装 / 箱体:TSSOP-14 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。