参数资料
| 型号： | MAX9551EUA+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 9/12页 |
| 文件大小： | 0K |
| 描述： | IC BUFFER VCOM 8-UMAX |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 应用： | TFT-LCD 面板：VCOM 驱动器 |
| 电路数： | 2 |
| 电流 - 电源： | 2mA |
| 电流 - 输出 / 通道： | 55mA |
| 电压 - 电源，单路/双路(±)： | 6 V ~ 20 V，±3 V ~ 10 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽）裸露焊盘 |
| 供应商设备封装： | 8-uMax-EP |
| 包装： | 带卷 (TR) |
MAX9550/MAX9551/MAX9552
High-Current VCOM Drive Buffers
for TFT LCDs
6
_______________________________________________________________________________________
MAX9550
16V
SUPPLY
16V
SUPPLY
*C1 = 4.7F
CL =1F
*C2 = 0.1F
*PLACE 4.7F AND 0.1F CAPACITORS AS CLOSE TO PIN AS POSSIBLE.
**RS INCLUDES THE GENERATOR RESISTANCE.
NOTE: PLACE CL AS CLOSE TO OUT PIN AS POSSIBLE AND KELVIN
SENSE THE FEEDBACK LOOP CONNECTION AS SHOWN.
0V TO 1.5V AT 50kHz
CS = 0.1F
**RS = 2.2
IN+
OUT
VOUT
TEST LOAD
VREF
VDD
IN-
GND
Figure 1. Settling Time Test Circuit
Detailed Description
The MAX9550/MAX9551/MAX9552 operational transcon-
ductance amplifiers (OTA) hold the VCOM voltage sta-
ble while providing the ability to source and sink a high
current quickly (800mA typ) into a capacitive load such
as the backplane of a TFT-LCD panel. The output settles
to within 0.1% in less than 2s. The fast settling time is
achieved by increasing the transconductance of the
buffer as the output current increases (see the Typical
Operating Characteristics).
In addition, the MAX9550/MAX9551/MAX9552 directly
drive the capacitive load in the VCOM layer of the
TFT LCD without the need for a series resistor.
The MAX9550/MAX9551/MAX9552 unity-gain band-
width is:
GBW = gM / 2πCOUT
where COUT is the capacitive load at the output and gM
is the transconductance.
To insure buffer stability, place a 1F low-ESR capaci-
tor as close to the OUT pin as possible. However, this
value may be reduced if the TFT-LCD panel load pro-
vides some of the capacitance and the resistance in
series when this capacitance is low. Connect the feed-
back at OUT using a Kelvin connection at the low-ESR
capacitor.
Thermal Shutdown with Temperature
Hysteresis
The MAX9550/MAX9551/MAX9552 are capable of high
output currents and therefore, feature thermal-shutdown
protection with temperature hysteresis. When the die tem-
perature reaches +160°C, the devices shut down. When
the die cools down by 15°C, the devices turn on again.
相关PDF资料 |
PDF描述 |
|---|---|
| MAX9658AEE+ | IC AMP FILTER VID QUAD 16-QSOP |
| VI-B63-MX-S | CONVERTER MOD DC/DC 24V 75W |
| VI-JNN-MZ-B1 | CONVERTER MOD DC/DC 18.5V 25W |
| VI-JNM-MZ-B1 | CONVERTER MOD DC/DC 10V 25W |
| VI-B2X-MX-S | CONVERTER MOD DC/DC 5.2V 75W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX9552EUD+ | 功能描述:LCD 驱动器 VCOM Drive Buffer for TFT LCD RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| MAX9552EUD+T | 功能描述:LCD 驱动器 VCOM Drive Buffer for TFT LCD RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| MAX9552EVKIT+ | 功能描述:LCD 驱动器 Evaluation Kit for the MAX9552 RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| MAX9568EEE+ | 功能描述:视频 IC RoHS:否 制造商:Fairchild Semiconductor 工作电源电压:5 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-28 封装:Reel |
| MAX9568EEE+T | 功能描述:视频 IC RoHS:否 制造商:Fairchild Semiconductor 工作电源电压:5 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-28 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。