- 您现在的位置：买卖IC网 > PDF目录2091 > MAX9787ETI+T (Maxim Integrated Products)IC AMP AUDIO PWR 2.2W AB 28TQFN PDF资料下载
参数资料
| 型号： | MAX9787ETI+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 4/15页 |
| 文件大小： | 0K |
| 描述： | IC AMP AUDIO PWR 2.2W AB 28TQFN |
| 标准包装： | 2,500 |
| 类型： | AB 类 |
| 输出类型： | 2 通道（立体声） |
| 在某负载时最大输出功率 x 通道数量： | 2.2W x 2 @ 3 欧姆 |
| 电源电压： | 4.5 V ~ 5.5 V |
| 特点： | 消除爆音，短路保护和热保护，关机，音量控制 |
| 安装类型： | 表面贴装 |
| 供应商设备封装： | 28-TQFN-EP（5x5） |
| 封装/外壳： | 28-WFQFN 裸露焊盘 |
| 包装： | 带卷 (TR) |
MAX9787
CPVDD Bypass Capacitor
The CPVDD bypass capacitor (C3) lowers the output
impedance of the power supply and reduces the
impact of the MAX9787’s charge-pump switching tran-
sients. Bypass CPVDD with C3, the same value as C1,
and place it physically close to the CPVDD and PGND
(refer to the MAX9750 Evaluation Kit for a suggested
layout).
Powering Other Circuits
from a Negative Supply
An additional benefit of the MAX9787 is the internally
generated negative supply voltage (CPVSS). CPVSS pro-
vides the negative supply for the amplifiers. It can also
be used to power other devices within a design.
Current draw from CPVSS should be limited to 5mA;
exceeding this affects the operation of the amplifier. A
typical application is a negative supply to adjust the
contrast of LCD modules.
When considering the use of CPVSS in this manner,
note that the charge-pump voltage of CPVSS is roughly
proportional to PVDD and is not a regulated voltage. The
charge-pump output impedance plot appears in the
Typical Operating Characteristics.
Layout and Grounding
Proper layout and grounding are essential for optimum
performance. Use large traces for the power-supply
inputs and amplifier outputs to minimize losses due to
parasitic trace resistance, as well as route head away
from the device. Good grounding improves audio per-
formance, minimizes crosstalk between channels, and
prevents any switching noise from coupling into the
audio signal. Connect CPGND, PGND, and GND
together at a single point on the PCB. Route CPGND
and all traces that carry switching transients away from
GND, PGND, and the traces and components in the
audio signal path.
Connect all components associated with the charge
pump (C2 and C3) to the CPGND plane. Connect VSS
and CPVSS together at the device. Place the charge-
pump capacitors (C1, C2, and C3) as close to the
device as possible. Bypass PVDD with a 0.1F capaci-
tor to GND. Place the bypass capacitors as close to the
device as possible.
Use large, low-resistance output traces. As load imped-
ance decreases, the current drawn from the device out-
puts increase. At higher current, the resistance of the
output traces decrease the power delivered to the load.
For example, when compared to a 0 trace, a 100m
trace reduces the power delivered to a 4 load from
2.1W to 2W. Large output, supply, and GND traces also
improve the power dissipation of the device.
The MAX9787 thin QFN features and exposed thermal
pad on its underside. This pad lowers the package’s
thermal resistance by providing a direct heat conduc-
tion path from the die to the PCB. Connect the exposed
thermal pad to GND by using a large pad and multiple
vias to the GND plane.
2.2W Stereo Audio Power Amplifier
with Analog Volume Control
12
______________________________________________________________________________________
Chip Information
TRANSISTOR COUNT: 9591
PROCESS: BiCMOS
相关PDF资料 |
PDF描述 |
|---|---|
| MAX9788ETI+T | IC AMP AUDIO PWR 2.4W G 28TQFN |
| MAX9789CETJ+ | IC AMP AUDIO 2W STER AB 32TQFN |
| MAX978ESE+T | IC COMPARATOR QUAD 16-SOIC |
| MAX9791CETI+ | IC AMP AUDIO 2.2W STER D 28WQFN |
| MAX9796EBX+TG45 | IC AMP AUDIO 2.3W MONO D 36UCSP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX9788EBP+ | 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述: |
| MAX9788EBP+T | 制造商:Maxim Integrated Products 功能描述:AUD AMP SPKR 1CH MONO 2.4W CLS-G 20UCSP - Tape and Reel |
| MAX9788ETI+ | 功能描述:音频放大器 14VP-P Class G Cer Speaker Driver RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel |
| MAX9788ETI+ | 制造商:Maxim Integrated Products 功能描述:IC AUDIO PWR AMP CLASS G 2.4W TQFN-28 |
| MAX9788ETI+T | 功能描述:音频放大器 14VP-P Class G Cer Speaker Driver RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。