参数资料
| 型号： | MAX9951DCCB+D |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 1/24页 |
| 文件大小： | 0K |
| 描述： | IC PPMU DUAL SPI 64TQFP |
| 标准包装： | 160 |
| 系列： | * |
19-3247; Rev 6; 8/13
MAX9951/MAX9952
Dual Per-Pin Parametric
Measurement Units
For pricing, delivery, and ordering information, please contact Maxim Direct
at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.
General Description
The MAX9951/MAX9952 dual parametric measurement
units (PMUs) feature a small package size, wide force and
measurement range, and high accuracy, making the
devices ideal for automatic test equipment (ATE) and other
instrumentation that requires a PMU per pin or per site.
The MAX9951/MAX9952 force or measure voltages in the
-2V to +7V through -7V to +13V ranges, dependent upon
the supply voltage (VCC and VEE). The devices handle
supply voltages of up to +30V (VCC to VEE) and a 20V
device-under-test (DUT) voltage swing at full current. The
MAX9951/MAX9952 also force or measure currents up to
±64mA with a lowest full-scale range of ±2A. Integrated
support circuitry facilitates use of an external buffer ampli-
fier for current ranges greater than ±64mA.
A voltage proportional to the measured output voltage
or current is provided at the MSR_ output. Integrated
comparators, with externally set voltage thresholds,
provide detection for both voltage and current levels.
The MSR_ and comparator outputs can be placed in a
high-impedance state. Separate FORCE and SENSE
connections are short-circuit protected for voltages
from (VEE - 0.3V) to (VCC + 0.3V). The FORCE output
also features a low-leakage, high-impedance state.
Integrated voltage clamps limit the force output to lev-
els set externally. The force-current or the measure-cur-
rent voltage can be offset -0.2V to +4.4V (IOS). This
feature allows for the centering of the control or mea-
sured signal within the external DAC or ADC range.
The MAX9951D/MAX9952D feature an integrated 10k
Ω
force-sense resistor between FORCE_ and SENSE_.
The MAX9951F/MAX9952F have no internal force-sense
resistor. These devices are available in a 64-pin, 10mm
x 10mm, 0.5mm pitch TQFP package with an exposed
8mm x 8mm die pad on the top (MAX9951) or the bot-
tom (MAX9952) of the package for efficient heat
removal. The exposed pad is internally connected to
VEE. The MAX9951/MAX9952 are specified over the
commercial 0°C to +70°C temperature range.
Applications
Memory Testers
VLSI Testers
System-on-a-Chip Testers
Structural Testers
Features
o Force Voltage/Measure Current (FVMI)
o Force Current/Measure Voltage (FIMV)
o Force Voltage/Measure Voltage (FVMV)
o Force Current/Measure Current (FIMI)
o Force Nothing/Measure Voltage (FNMV)
o Force Nothing/Measure Current (FNMI,
Range E Only)
o Termination/Measure Current
o Termination/Measure Voltage
o Five Programmable Current Ranges
±2A
±20A
±200A
±2mA
±64mA
o -2V to +7V Through -7V to +13V Input-Voltage
Range
o Force-Current/Measure-Current Adjustable-
Voltage Offset (IOS)
o Programmable Voltage Clamps at Force Output
o Low-Leakage, High-Impedance Measure, and
Force States
o 3-Wire Serial Interface
o Low 6mA (max) Quiescent Current per PMU
Ordering Information
+
Denotes a lead(Pb)-free/RoHS-compliant package.
-
Denotes a package containing lead(Pb).
D = Dry pack.
*
EPR = Top side exposed pad.
T = Tape and reel.
**
EP = Exposed pad.
Pin Configurations and Selector Guide appear at end of
data sheet.
PART
TEMP RANGE
PIN-PACKAGE
MAX9951DCCB+D
0°C to +70°C
64 TQFP-EPR*
MAX9951DCCB+TD
0°C to +70°C
64 TQFP-EPR*
MAX9951DCCB-D
0°C to +70°C
64 TQFP-EPR*
MAX9951DCCB-TD
0°C to +70°C
64 TQFP-EPR*
MAX9951FCCB+
0°C to +70°C
64 TQFP-EPR*
MAX9951FCCB+T
0°C to +70°C
64 TQFP-EPR*
MAX9951FCCB-D
0°C to +70°C
64 TQFP-EPR*
MAX9951FCCB-TD
0°C to +70°C
64 TQFP-EPR*
MAX9952DCCB+
0°C to +70°C
64 TQFP-EP**
MAX9952DCCB+T
0°C to +70°C
64 TQFP-EP**
MAX9952DCCB-D
0°C to +70°C
64 TQFP-EP**
MAX9952DCCB-TD
0°C to +70°C
64 TQFP-EP**
MAX9952FCCB+
0°C to +70°C
64 TQFP-EP**
MAX9952FCCB+T
0°C to +70°C
64 TQFP-EP**
MAX9952FCCB-D
0°C to +70°C
64 TQFP-EP**
MAX9952FCCB-TD
0°C to +70°C
64 TQFP-EP**
相关PDF资料 |
PDF描述 |
|---|---|
| LFX125EB-05F256C | IC FPGA 139K GATES 256-BGA |
| LFX125EB-05FN256C | IC FPGA 139K GATES 256-BGA |
| MAX9950DCCB+D | IC PPMU DUAL SPI 64TQFP |
| LFX125EB-04FN256I | IC FPGA 139K GATES 256-BGA |
| MAX9949DCCB+D | IC PPMU DUAL SPI 64TQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX9951DCCB-TD | 功能描述:接口 - 专用 RoHS:否 制造商:Texas Instruments 产品类型:1080p60 Image Sensor Receiver 工作电源电压:1.8 V 电源电流:89 mA 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:BGA-59 |
| MAX9951FCCB | 功能描述:数据转换 IC - 多种 RoHS:否 制造商:Texas Instruments 转换器数量:1 分辨率:8 bit 工作电源电压:2.7 V to 5.5 V 功耗: 工作温度范围:- 40 C to + 85 C 封装 / 箱体:MSOP-10 封装:Reel |
| MAX9951FCCB+ | 功能描述:接口 - 专用 Dual Per-Pin PMU RoHS:否 制造商:Texas Instruments 产品类型:1080p60 Image Sensor Receiver 工作电源电压:1.8 V 电源电流:89 mA 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:BGA-59 |
| MAX9951FCCB+T | 功能描述:接口 - 专用 Dual Per-Pin PMU RoHS:否 制造商:Texas Instruments 产品类型:1080p60 Image Sensor Receiver 工作电源电压:1.8 V 电源电流:89 mA 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:BGA-59 |
| MAX9951FCCB-D | 功能描述:接口 - 专用 RoHS:否 制造商:Texas Instruments 产品类型:1080p60 Image Sensor Receiver 工作电源电压:1.8 V 电源电流:89 mA 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:BGA-59 |
发布紧急采购，3分钟左右您将得到回复。