参数资料
型号: MAX9967BDCCQ-TD
厂商: MAXIM INTEGRATED PRODUCTS INC
元件分类: 比较器
英文描述: Dual, Low-Power, 500Mbps ATE Driver/Comparator with 35mA Load
中文描述: DUAL COMPARATOR, 100000 uV OFFSET-MAX, 2.2 ns RESPONSE TIME, PQFP100
封装: 14 X 14 MM, 1 MM HEIGHT, 0.50 MM PITCH, TQFP-100
文件页数: 1/33页
文件大小: 1082K
代理商: MAX9967BDCCQ-TD
General Description
The MAX9967 dual, low-power, high-speed, pin electron-
ics driver/comparator/load (DCL) IC includes, for each
channel, a three-level pin driver, a dual comparator, vari-
able clamps, and an active load. The driver features a
wide voltage range and high-speed operation, includes
high-impedance and active-termination (3rd-level drive)
modes, and is highly linear even at low-voltage swings.
The dual comparator provides low dispersion (timing
variation) over a wide variety of input conditions. The
clamps provide damping of high-speed device-under-
test (DUT) waveforms when the device is configured as a
high-impedance receiver. The programmable load sup-
plies up to 35mA of source and sink current. The load
facilitates contact/continuity testing, at-speed parametric
testing of IOH and IOL, and pullup of high-output-imped-
ance devices.
The MAX9967A provides tight matching of gain and off-
set for the drivers, and offset for the comparators and
active load, allowing reference levels to be shared
across multiple channels in cost-sensitive systems. Use
the MAX9967B for system designs that incorporate
independent reference levels for each channel.
The MAX9967 provides high-speed, differential control
inputs with optional internal termination resistors that
are compatible with ECL, LVPECL, LVDS, and GTL.
ECL/LVPECL or flexible open-collector outputs with
optional internal pullup resistors are available for the
comparators. These features significantly reduce the
discrete component count on the circuit board.
A 3-wire, low-voltage, CMOS-compatible serial interface
programs the low-leakage, slew-rate limit, and tri-
state/terminate operational configurations of the
MAX9967.
The MAX9967’s operating range is -1.5V to +6.5V with
power dissipation of only 1.15W per channel. The
device is available in a 100-pin, 14mm x 14mm body,
and 0.5mm pitch TQFP. An exposed 8mm x 8mm die
pad on the top of the package facilitates efficient heat
removal. The device is specified to operate with an
internal die temperature of +70°C to +100°C, and
features a die temperature monitor output.
Applications
Low-Cost Mixed-Signal/System-on-Chip ATE
Commodity Memory ATE
PCI or VXI Programmable Digital Instruments
Features
Low Power Dissipation: 1.15W/Channel (typ)
High Speed: 500Mbps at 3VP-P
Programmable 35mA Active-Load Current
Low Timing Dispersion
Wide -1.5V to +6.5V Operating Range
Active Termination (3rd-Level Drive)
Low Leakage Mode: 60nA
Integrated Clamps
Interfaces Easily with Most Logic Families
Integrated PMU Connection
Digitally Programmable Slew Rate
Internal Termination Resistors
Low Gain and Offset Error
MAX9967
Dual, Low-Power, 500Mbps ATE
Driver/Comparator with 35mA Load
________________________________________________________________ Maxim Integrated Products
1
Ordering Information
19-3195; Rev 1; 2/05
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
PART
TEMP RANGE
PIN-PACKAGE
MAX9967ADCCQ*
0°C to +70°C
100 TQFP-EPR**
MAX9967AGCCQ*
0°C to +70°C
100 TQFP-EPR**
MAX9967ALCCQ
0°C to +70°C
100 TQFP-EPR**
MAX9967AMCCQ*
0°C to +70°C
100 TQFP-EPR**
MAX9967AQCCQ*
0°C to +70°C
100 TQFP-EPR**
MAX9967ARCCQ*
0°C to +70°C
100 TQFP-EPR**
MAX9967BDCCQ
0°C to +70°C
100 TQFP-EPR**
MAX9967BGCCQ
0°C to +70°C
100 TQFP-EPR**
MAX9967BLCCQ
0°C to +70°C
100 TQFP-EPR**
MAX9967BMCCQ
0°C to +70°C
100 TQFP-EPR**
MAX9967BQCCQ*
0°C to +70°C
100 TQFP-EPR**
MAX9967BRCCQ
0°C to +70°C
100 TQFP-EPR**
*Future product—contact factory for availability.
**EPR = Exposed pad reversed (TOP).
Pin Configuration and Typical Application Circuits appear at
end of data sheet.
Selector Guide appears at end of data sheet.
相关PDF资料
PDF描述
MAX9967BGCCQ-BOU-D Dual, Low-Power, 500Mbps ATE Driver/Comparator with 35mA Load
MAX9967BGCCQ-D Dual, Low-Power, 500Mbps ATE Driver/Comparator with 35mA Load
MAX9967BGCCQ-TD Dual, Low-Power, 500Mbps ATE Driver/Comparator with 35mA Load
MAX9967BLCCQ-D Dual, Low-Power, 500Mbps ATE Driver/Comparator with 35mA Load
MAX9967BLCCQ-TD Dual, Low-Power, 500Mbps ATE Driver/Comparator with 35mA Load
相关代理商/技术参数
参数描述
MAX9967BGCCQ 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述:
MAX9967BGCCQ+D 功能描述:缓冲器和线路驱动器 RoHS:否 制造商:Micrel 输入线路数量:1 输出线路数量:2 极性:Non-Inverting 电源电压-最大:+/- 5.5 V 电源电压-最小:+/- 2.37 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Reel
MAX9967BGCCQ+TD 功能描述:缓冲器和线路驱动器 RoHS:否 制造商:Micrel 输入线路数量:1 输出线路数量:2 极性:Non-Inverting 电源电压-最大:+/- 5.5 V 电源电压-最小:+/- 2.37 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Reel
MAX9967BGCCQ-B0U 功能描述:校验器 IC Dual Low-Power 500Mbps ATE Driver/Comparator with 35mA Load RoHS:否 制造商:STMicroelectronics 产品: 比较器类型: 通道数量: 输出类型:Push-Pull 电源电压-最大:5.5 V 电源电压-最小:1.1 V 补偿电压(最大值):6 mV 电源电流(最大值):1350 nA 响应时间: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SC-70-5 封装:Reel
MAX9967BGCCQ-BOU+D 功能描述:校验器 IC Dual Low-Power 500Mbps ATE Driver/Comparator with 35mA Load RoHS:否 制造商:STMicroelectronics 产品: 比较器类型: 通道数量: 输出类型:Push-Pull 电源电压-最大:5.5 V 电源电压-最小:1.1 V 补偿电压(最大值):6 mV 电源电流(最大值):1350 nA 响应时间: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SC-70-5 封装:Reel