- 您现在的位置：买卖IC网 > Datasheet目录475 > MAX9995EVKIT (Maxim Integrated)EVAL KIT FOR MAX9995 Datasheet资料下载
参数资料
| 型号： | MAX9995EVKIT |
| 厂商： | Maxim Integrated |
| 文件页数： | 5/8页 |
| 文件大小： | 0K |
| 描述： | EVAL KIT FOR MAX9995 |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 类型： | 混频器 |
| 频率： | 1.7GHz ~ 2.2GHz |
| 适用于相关产品： | MAX9995 |
| 已供物品： | 板 |
MAX9995 Evaluation Kit
Layout Considerations
The MAX9995 evaluation board can be a guide for your
board layout. Pay close attention to thermal design and
close placement of parts to the IC. The package ’s
exposed paddle (EP) conducts heat from the part and
provides a low-impedance electrical connection. The
EP MUST be attached to the PC board ground plane
with a low thermal and electrical impedance contact.
Ideally, this can be achieved by soldering the backside
package contact directly to a top metal ground plane
on the PC board. Alternatively, the EP can be connect-
ed to a ground plane using an array of plated vias
Retuning for a different IF frequency is as simple as
scaling the values of the IF pullup inductors up or down
with frequency. The IF output looks like 200 ? differen-
tial in parallel with a capacitor. The capacitance is due
to the combination of the IC, PC board, and external IF
components. The capacitance from the IC is approxi-
mately 2pF to ground (1pF differential), while that from
the PC board and external components is approxi-
mately 3.5pF to ground. The total 5.5pF of capacitance
is resonated out at the frequency of interest by the bias
inductors. To determine the inductor value, use the fol-
lowing equation:
directly below the EP. The EV kit uses nine evenly
spaced, 0.016in-diameter, plated through holes to con-
nect the EP to the lower ground planes.
f IF =
1
2 π L x C
Depending on the RF ground-plane spacing, large sur-
face-mount pads in the RF path may need the ground
plane relieved under them to reduce shunt capacitance.
Modifying the EV Kit
The RF and LO inputs are broadband matched, so
there is no need to modify the circuit for use anywhere
in the 1700MHz to 2200MHz RF range (1400MHz to
2000MHz LO range).
The IF output is tuned for operation at approximately
200MHz, so a 330nH inductor is used. For lower IF fre-
quencies (i.e., larger component values), maintain the
component’s Q value at the cost of larger case size,
unless it is unavoidable.
_______________________________________________________________________________________
5
相关PDF资料 |
PDF描述 |
|---|---|
| MAX9996ETP+D | IC MIXER DOWN CONV 20-TQFN |
| MAX9996EVKIT | EVAL KIT FOR MAX9996 |
| MC-7831-AZ | IC PUSH-PULL AMP 870MHZ H02 |
| MC-7832-AZ | IC PUSH-PULL AMP 870MHZ H02 |
| MC-7833-AZ | IC PUSH-PULL AMP 870MHZ H02 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX9996ETP | 功能描述:特殊用途放大器 RoHS:否 制造商:Texas Instruments 通道数量:Single 共模抑制比（最小值）: 输入补偿电压: 工作电源电压:3 V to 5.5 V 电源电流:5 mA 最大功率耗散: 最大工作温度:+ 70 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:QFN-20 封装:Reel |
| MAX9996ETP+ | 功能描述:上下转换器 SiGe 1700-2200MHz Downconversion Mixer RoHS:否 制造商:Texas Instruments 产品:Down Converters 射频:52 MHz to 78 MHz 中频:300 MHz LO频率: 功率增益: P1dB: 工作电源电压:1.8 V, 3.3 V 工作电源电流:120 mA 最大功率耗散:1 W 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PQFP-128 |
| MAX9996ETP+D | 功能描述:上下转换器 SiGe 1700-2200MHz Downconversion Mixer RoHS:否 制造商:Texas Instruments 产品:Down Converters 射频:52 MHz to 78 MHz 中频:300 MHz LO频率: 功率增益: P1dB: 工作电源电压:1.8 V, 3.3 V 工作电源电流:120 mA 最大功率耗散:1 W 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PQFP-128 |
| MAX9996ETP+G48 | 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述: |
| MAX9996ETP+T | 功能描述:上下转换器 SiGe 1700-2200MHz Downconversion Mixer RoHS:否 制造商:Texas Instruments 产品:Down Converters 射频:52 MHz to 78 MHz 中频:300 MHz LO频率: 功率增益: P1dB: 工作电源电压:1.8 V, 3.3 V 工作电源电流:120 mA 最大功率耗散:1 W 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PQFP-128 |
发布紧急采购，3分钟左右您将得到回复。