- 您现在的位置：买卖IC网 > PDF目录299463 > MB3790PFT 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO20 PDF资料下载
参数资料
| 型号： | MB3790PFT |
| 元件分类： | 电源管理 |
| 英文描述： | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO20 |
| 封装： | PLASTIC, TSSOP-20 |
| 文件页数： | 20/22页 |
| 文件大小： | 192K |
| 代理商： | MB3790PFT |
MB3790
7
(4) Momentary power failure or voltage dip
When the power supply voltage drops less than or equal to VINL. (4.2 V Typ) as the power supply goes down or its
voltage dips momentarily, the RESET pin outputs a High level and the RESET pin outputs a low level. The devices
such as SRAM or a microprocessor are thereby placed in the standby mode and powered from the battery. When
in this mode, the primary battery voltage detection and the secondary battery recharging operations are stopped.
Note: To guarantee backup operation in case of momentary power failure, make sure the 5 V-to-0 V fall time on VIN
is 50
s or more by using, for example, a capacitor.
2.
Alarm Operation
If the primary battery voltage decreases while the power supply voltage (VIN) is greater than or equal to VINH (4.3 V
Typ), alarm signals are output as described below. At this time, if the VBAT1 pin is released open, the output from the
alarm pin becomes indeterminate.
(1) Primary battery replacement alarm (alarm-1 output)
If the primary battery voltage drops to VBAT1 (2.65 V Typ), the ALARM1 pin is forced to a Low level to issue an alarm
indicating that it’s time to replace the primary battery.
(2) Primary battery minimum voltage alarm (alarm-2 output)
If the primary battery voltage further drops to VBAT2 (2.37 V Typ), the ALARM2 pin is forced to a Low level to issue
an alarm indicating that the primary battery power has dropped below the voltage necessary to retain the SRAM
data (approx. 2.0 V).
V BAT1
(1)
DV BAT1
V BATH1
DV BAT2
V BATL1
V BATH2
V BATL2
ALARM1
ALARM2
(1)
(2)
相关PDF资料 |
PDF描述 |
|---|---|
| MB4514P | TELEPHONE SPEECH CKT, PDIP22 |
| MB4514PF | TELEPHONE SPEECH CKT, PDSO24 |
| MB57T33-14.7456-2.5/-30+85 | TCXO, CLOCK, 14.7456 MHz, HCMOS OUTPUT |
| MB57T33-77.760-2.5/-30+85 | TCXO, CLOCK, 77.76 MHz, HCMOS OUTPUT |
| MB57T33-19.680-2.5/-30+85 | TCXO, CLOCK, 19.68 MHz, HCMOS OUTPUT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MB3793 | 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:POWER-VOLTAGE MONITORING IC WITH WATCHDOG TIMER |
| MB3793-27A | 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:Power Voltage Monitoring IC with Watchdog Timer |
| MB3793-27AP | 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:Power Voltage Monitoring IC with Watchdog Timer |
| MB3793-27APF | 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:Power Voltage Monitoring IC with Watchdog Timer |
| MB3793-27APF-G-JN-6E1 | 制造商:Fujitsu 功能描述:L 3.5V to 16V 2.7V VvZbg/p[IZbg 8SOP Tube |
发布紧急采购，3分钟左右您将得到回复。