参数资料
型号: MB88151APNF-G-801-JNE1
元件分类: 时钟产生/分配
英文描述: OTHER CLOCK GENERATOR, PDSO8
封装: 3.90 X 5.05 MM, 1.75 MM HEIGHT, 1.27 MM PITCH, SOP-8
文件页数: 7/24页
文件大小: 686K
代理商: MB88151APNF-G-801-JNE1
MB88151A
DS04-29127-2E
15
■ LOCK-UP TIME
If the setting pin is fixed at the “H” or “L” level, the maximum time after the power is turned on until the set clock
signal is output from CKOUT pin is (the stabilization wait time of input clock to XIN pin)
+ (the lock-up time “tLK”).
For the input clock stabilization time, check the characteristics of the resonator or oscillator used.
For modulation enable control using the ENS pin during normal operation, the set clock signal is output from
CKOUT pin at most the lock-up time (tLK) after the level at the ENS pin is determined.
Note : When the pin setting is changed, the CKOUT pin output clock stabilization time is required. Until the output
clock signal becomes stable, the output frequency, output clock duty cycle, modulation period, and cycle-
cycle jitter cannot be guaranteed. It is therefore advisable to perform processing such as cancelling a reset
of the device at the succeeding stage after the lock-up time.
3.0 V
VDD
XIN
VIH
CKOUT
Setting pin
SEL0,
SEL1,
ENS
Internal clock
stabilization wait time
tLK
(lock-up time )
VIL
VIH
XIN
ENS
CKOUT
tLK
(lock-up time )
tLK
(lock-up time )
相关PDF资料
PDF描述
MB96384YWBPMC-GSE2 16-BIT, MROM, 56 MHz, MICROCONTROLLER, PQFP120
MB96F338RWAPMC-GSE2 16-BIT, FLASH, 56 MHz, MICROCONTROLLER, PQFP144
MPC5607BMLL4 FLASH, 48 MHz, MICROCONTROLLER, PQFP100
MB95F478HPMC2 8-BIT, FLASH, MICROCONTROLLER, PQFP64
MB95F478KPMC2 8-BIT, FLASH, MICROCONTROLLER, PQFP64
相关代理商/技术参数
参数描述
MB88151APNF-G-801-JNEFE1 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:Spread Spectrum Clock Generator
MB88151APNF-G-801-JNERE1 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:Spread Spectrum Clock Generator
MB88151PNF-G-200-JNE1 制造商:FUJITSU 功能描述:
MB88151PNF-G-400-JNE1 制造商:FUJITSU 功能描述:
MB88151PNF-G-500-JNE1 制造商:FUJITSU 功能描述: