参数资料
型号: MB90522APFF
元件分类: 微控制器/微处理器
英文描述: 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP120
封装: PLASTIC, LQFP-120
文件页数: 11/99页
文件大小: 978K
代理商: MB90522APFF
MB90520A/520B Series
19
Conditions when output from ports 0 and 1 is undefined
After turning on the power supply, the outputs from ports 0 and 1 are undefined during the oscillation stabili-
zation delay time controlled by the regulator circuit (during the power-on reset) . The figure below shows the
timing.
Note that this undefined output period does not occur on products without an internal regulator circuit as these
products do not have an oscillation stabilization delay time.
Note : See the “s PRODUCT LINEUP” section for details of which MB90520A/520B series products have an internal
regulator circuit.
Initialization
The device contains internal registers that are only initialized by a power-on reset. To initialize these registers,
restart the power supply.
Notes on using the DIV A, Ri and DIVW A, RWi instructions
Set the corresponding bank registers (DTB, ADB, USB, SSB) to “00H” when using the signed division instruc-
tions “DIV A, Ri” and “DIVW A, RWi”.
If the corresponding bank registers (DTB, ADB, USB, SSB) are set to other than “00H”, the remainder value
produced by the instruction is not stored in the instruction operand register.
Notes on using REALOS
The extended intelligent I/O service (EI2OS) cannot be used when using REALOS.
Caution on Operations during PLL Clock Mode
If the PLL clock mode is selected, the microcontroller attempt to be working with the self-oscillating circuit even
when there is no external oscillator or external clock input is stopped. Performance of this operation, however,
cannot be guaranteed.
VCC (Power supply pin)
PONR (Power-on reset) signal
RST (External asynchronous reset) signal
RST (Internal reset) signal
Oscillation clock signal
KA (Internal operating clock A) signal
KB (Internal operating clock B) signal
PORT (port output) signal
Oscillation stabilization delay time*2
Undefined output time
Regulator circuit stabilization
delay time*1
*1 : Regulator circuit oscillation stabilization delay time : 217/Oscillation clock frequency
(approx. 8.19 ms for a 16 MHz oscillation clock frequency)
*2 : Oscillation stabilization delay time : 218/Oscillation clock frequency
(approx. 16.38 ms for a 16 MHz oscillation clock frequency)
Timing chart for undefined output from ports 0 and 1
相关PDF资料
PDF描述
MB90523APFF 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP120
MB90522BPFV 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP120
MB90522APFV 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP120
MB90523APFV 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP120
MB90522BPFF 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP120
相关代理商/技术参数
参数描述
MB90522APFV 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller
MB90522B 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller
MB90522BPFF 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller
MB90522BPFV 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller
MB90522BPMC1 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:16-bit Microcontroller