参数资料
型号: MB90573PFF
元件分类: 微控制器/微处理器
英文描述: 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP120
封装: PLASTIC, LQFP-120
文件页数: 31/120页
文件大小: 1754K
代理商: MB90573PFF
MB90570 Series
18
The series without built-in step-down circuit have no oscillation setting time of step-down circuit, so outputs
should not become indeterminate. (MB90F574,MB90F574A,MB90574C)
12. Initialization
In the device, there are internal registers which are initialized only by a power-on reset. Turn on the power again
to initialize these registers.
13. Return from standby state
If the power-supply voltage goes below the standby RAM holding voltage in the standby state, the device may
fail to return from the standby state. In this case, reset the device via the external reset pin to return to the normal
state.
14. Precautions for Use of ’DIV A, Ri,’ and ’DIVW A, Ri’ Instructions
The signed multiplication-division instructions ’DIV A, Ri,’ and ’DIVW A, RWi’ should be used when the corre-
sponding bank registers (DTB, ADB, USB, SSB) are set to value ’00h.’ If the corresponding bank registers (DTB,
ADB, USB, SSB) are set to a value other than ’00h,’ then the remainder obtained after the execution of the
instruction will not be placed in the instruction operand register.
15. Precautions for Use of REALOS
Extended intelligent I/O service (EI2OS) cannot be used, when REALOS is used.
16. Caution on PLL Clock Mode
If the PLL clock mode is selected, the microcontroller attempt to be working with the self-oscillating circuit even
when there is no external oscillator or external clock input is stopped. Performance of this operation, however,
cannot be guaranteed.
Oscillation setting time *2
VCC (power-supply pin)
PONR (power-on reset) signal
RST (external asynchronous reset) signal
RST (internal reset) signal
Oscillation clock signal
KA (internal operating clock A) signal
KB (internal operating clock B) signal
PORT (port output) signal
Step-down circuit setting time *1
Period of indeterminate
*1: Step-down circuit setting time 217/oscillation clock frequency (oscillation clock frequency of 16 MHz: 8.19 ms)
*2: Oscillation setting time
218/oscillation clock frequency (oscillation clock frequency of 16 MHz: 16.38 ms)
Timing chart of indeterminate outputs from ports 0 and 1
相关PDF资料
PDF描述
MSM66Q573Y-NTB 16-BIT, FLASH, 26 MHz, MICROCONTROLLER, PQFP100
MK3200STR 0.032768 MHz, OTHER CLOCK GENERATOR, PDSO8
MB89965PFV1 8-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP48
MPC8265AZUPIBX 32-BIT, 300 MHz, RISC PROCESSOR, PBGA480
MPC8347CZQADDB 32-BIT, 266 MHz, MICROPROCESSOR, PBGA620
相关代理商/技术参数
参数描述
MB90573PFV 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller
MB90573PMC1 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller
MB90574 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller
MB90574C 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller
MB90574CPFV 制造商:FUJITSU 功能描述:MicroController, 16-Bit, 120 Pin, Plastic, QFP